Wood Turning Commission to Reproduce an Antique Table Leg

Wood Turning Commission to Reproduce an Antique Table Leg | Restoration by Fixing Furniture

Рет қаралды 12,970

Күн бұрын

I've built my wood turning skills to help restore furniture. Several years ago turned my first wood turning commission to reproduce an antique Mahogany table leg. At the time, this was a new skill for me and I'm sharing this video with some tips from the lessons I've learned since then.
I'm also showing an early prototype of a lathe dust collection system I've invented. You can learn more about it on the CleanLathe KZfaq Channel / @cleanlathe
AAW - The American Association of Woodturners www.woodturner.org/
PRODUCT LINKS:
Ryoba Japanese Saw - amzn.to/3NbV2wb
🇨🇦 Canadian link - amzn.to/39m6Ugy
Book - Getting Started in Woodturning amzn.to/3yD0Nis
🇨🇦 amzn.to/3wvaT22
Note: purchases made with these links help contribute to our video production work
VIDEO TOPICS:
00:00 First Wood Turning Commission
01:32 Trimming the Mahogany Blank
05:44 Mounting the Blank on the Lathe
06:51 Turning the Blank to Round
08:58 Laying Out the Leg Dimensions
10:57 Turning the Leg to Dimensions
13:40 Shaping the Leg & Challenges
16:03 Matching the Mahogany Wood Stain
21:33 Applying Garnet Shellac
24:06 CleanLathe Dust Collection System
25:46 Final Leg Finished
Fixing Furniture is not only a KZfaq channel but it's also a membership community. Get access to videos before they're published on KZfaq, watch all the videos without ads, get downloadable reference sheets, and participate in Fixing Furniture Live every two weeks. Learn more about membership at www.fixingfurniture.com
OUR NEWSLETTER - Sign up at www.fixingfurniture.com
See the tools we use in our workshop and the tools we recommend: www.amazon.com/shop/homeimpro...
🇨🇦 Canadian link - www.amazon.ca/shop/homeimprov...
Fixing Furniture is hosted by Scott Bennett, Owner of Wooden It Be Nice - Furniture Repair in Brooklin, Ontario, Canada. WoodenItBeNice.ca
#woodturning #woodturner #restoration

Пікірлер: 77

@caroltanzi29 2 жыл бұрын

Scott: the leg “sculpture” was perfect. I so enjoyed watching you move thru the steps of creating the leg. Also, I am going to continue watching the process of your invention. It seems to be a winner! Carol from California

@FixingFurniture 2 жыл бұрын

Glad you enjoyed it! Thanks for your supportive comments Carol!

@robertlivingstone3947 2 жыл бұрын

First off you never stop learning it just makes you business better great video

@FixingFurniture 2 жыл бұрын

Good point Robert. Glad you enjoyed the video! Scott

@karendoyle7999 2 жыл бұрын

Stunning. I like it better than the original.

@FixingFurniture 2 жыл бұрын

Thank you! 😊

@SparrowStockwell 11 ай бұрын

That leg looks awesome!

@FixingFurniture 11 ай бұрын

Thank you! Scott

@bubba8 2 жыл бұрын

Exceptional. Excellent. A dedicated skilled professional.

@FixingFurniture 2 жыл бұрын

Thank you Ray! Scott

@nr3rful 2 жыл бұрын

Turned out marvelously...a true craftsman

@FixingFurniture 2 жыл бұрын

Thank you. I appreciate that. Scott

@shirleypedersen7406 Жыл бұрын

Excellent! Very interesting. Not an easy skill to master but as they say - practise makes perfect. I just enjoy watching the transformation. Fascinating indeed.

@mariushegli 2 жыл бұрын

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@FixingFurniture 2 жыл бұрын

Thanks Marius

@philipselman2564 3 ай бұрын

That was a really good vid and good job Scotty ⭐️⭐️⭐️⭐️⭐️

@TheDakotawolf11 2 жыл бұрын

This gives me hope that someday I might try wood turning.

@FixingFurniture 2 жыл бұрын

If you'd like to give it a try, look for a local woodturning club. They're usually setup to teach those interested in learning the skills. Cheers. Scott

@krenwregget7667 2 жыл бұрын

fantastic results both in the form and the finish. Well done.

@FixingFurniture 2 жыл бұрын

Thank you so much 😀

@martinharper9776 2 жыл бұрын

Loved the video Scott.

@FixingFurniture 2 жыл бұрын

Glad you enjoyed it Martin. Thanks for watching

@bistromathics6 2 жыл бұрын

Makes me want to get back to turning again!

@FixingFurniture 2 жыл бұрын

Glad you enjoyed it. Scott

@terrimilburn-rodrigues858 2 жыл бұрын

Beautiful work Scott!!

@FixingFurniture 2 жыл бұрын

Thank you! Cheers!

@elviramcintosh9878 5 ай бұрын

Your presentation is so good, thank you for including the natural mistakes that the work incurs - and how you fixed them, I cannot believe the magic of colour-matching. And your invention could save many wood-turners lungs. Great work. Greetings from Australia.

@FixingFurniture 5 ай бұрын

Thank you so much! I appreciate you sharing your thoughts. Scott

@cobberpete1 2 жыл бұрын

Yes Scott, lots of smiles while watching this video. I've been turning for six years... A customer wanted a table with basic round legs, so I bought a lathe. Then they changed there mind. Oh well, I now turn just as much as I 'Cabinet' make, but for the enjoyment. I wont make any comments on the turning. You know now what is good and bad 😎.

@cobberpete1 2 жыл бұрын

P.S. I also joined a local club to get the tuition.

@FixingFurniture 2 жыл бұрын

Thanks for sharing that Peter. Glad to hear you're enjoying turning. Cheers

@freeethnker 2 жыл бұрын

Whoa...the leg came out beautiful! Thanks for sharing your experience with the lathe.

@FixingFurniture 2 жыл бұрын

Glad you liked it! Thanks for watching! Scott

@renoholland7090 2 жыл бұрын

Wonderful job. It (almost) wants me to buy a lathe again. I still have a set of good chisels

@FixingFurniture 2 жыл бұрын

Glad you liked it! Maybe you can use those chisels again some day. Scott

@ohgary Жыл бұрын

Pretty good for a beginner.just imagine what you will be able to do in 2-3 years!

@FixingFurniture Жыл бұрын

Thank you. Yes, practice, practice, practice!

@arielrivera4051 2 жыл бұрын

Absolutely gorgeous. Excellent work as always.

@FixingFurniture 2 жыл бұрын

Thank you very much Ariel! Scott

@michaelgrimes8828 2 жыл бұрын

Excellent job

@FixingFurniture 2 жыл бұрын

Thank you! Cheers!

@scottinkster1344 2 жыл бұрын

Thanks for sharing both the successes and challenges on this project.

@FixingFurniture 2 жыл бұрын

Thanks for the feedback Scott. I appreciate it.

@PaxPixie7 2 жыл бұрын

I always learn so much from your videos. They’re well-presented and informative without being overwhelming. Thank you!

@FixingFurniture 2 жыл бұрын

Glad you like them! Thanks for sharing that Kimberly. Scott

@167curly 2 жыл бұрын

Congratulations on replicating that quite ornate heavy table leg, Scott. I knew a man who bought a wood-turning lathe and he enjoyed making lamps for gifts, but had great difficulty in making matching pairs of them.

@FixingFurniture 2 жыл бұрын

Thank you Phil! I appreciate that.

@ohgary Жыл бұрын

My Shopsmith has a lathe duplicator accessory for just such occasions.

@NElj-yq9qi 2 жыл бұрын

Great job Scott on the leg turning! Loved watching the process of taking a blank to the finished product!

@FixingFurniture 2 жыл бұрын

Glad you enjoyed it! Thanks for sharing that. Scott

@JamesDeese 2 жыл бұрын

I hope the launch of the invention is going well. I get a lot out of the tips and skills that you demonstrate in repairing the furniture.

@FixingFurniture 2 жыл бұрын

Thank you for sharing that James. I find it motivating to hear you're learning from our videos. Scott

@asbrand 2 жыл бұрын

I have found using a contour gauge helps me a lot when duplicating a piece.

@FixingFurniture 2 жыл бұрын

Interesting. I've tried one but it didn't work well. Do you have a brand you can share? Thanks. Scott

@elianagotilla6564 2 жыл бұрын

There is one at Lee valley made of steel which is full of dents, thus providing a more detailed profile. Greetings from Brazil ! My name is Eliana and I love to restore pieces as a hobby. I'm a rookie.

@Chris-yb1nt 2 жыл бұрын

Great video, well done with the table leg. Very helpful for a beginner woodturner. Was nice to watch it!

@FixingFurniture 2 жыл бұрын

Glad you enjoyed it Chris! Thanks for being a subscriber! Scott

@glencrandall7051 2 жыл бұрын

I presume your turning skills have improved since this video was made. Your captions indicate so. Not too bad for a first piece. Duplicating pieces is always difficult. Thank you for sharing. Have a great day and stay safe.🙂🙂

@FixingFurniture 2 жыл бұрын

Yes, thank you. In some of my recent videos, you will notice improved turning skills. As I mentioned at the end of the video, I've also had some lessons from a pro in the last year to help with setup and techniques. Cheers. Scott

@PaulWoodJatobaFilms 2 жыл бұрын

Great stuff, Scott, you certainly have more courage than me, reproducing a piece as large as that! I normally use my lathe for making chair stretchers when repairing work for clients, and I’m pretty sure I’d never attempt a job like that. Very good to watch, and you are right, keep improving our skills is the way to go. Super job!

@FixingFurniture 2 жыл бұрын

Thanks for sharing that Paul. I enjoy learning, so improving skills appeals to me. What's the name of your business? I sometimes get people asking for referrals from different cities.

@ellisc.foleyjr9778 2 жыл бұрын

Great video Scott. I always wanted to learn how to turn with a lathe but could not justify the cost for one or two turnings I might do or have done. But always appreciated the skill set involved. I have done lathe work with metal in my previous job as an Elevator installer /repair work. so do have some experience there. thanks for sharing. ECF.

@FixingFurniture 2 жыл бұрын

Glad you enjoyed watching Ellis. Maybe that's something you can do in the future. I purchased my lathe used so it was less expensive to get into turning. Cheers. Scott

@rynait 8 ай бұрын

based on your most recent video in the competition. I looked for this one video of yours to double check your understanding. and noted few things as in explaining or what for... are missing. So this is not "how to do woodturning" video, even for beginners. It is showing how complex lathe work may or will affect the workpiece and OP tried to explain some tips to address his perception on handling the complexity.

@izzym784 2 жыл бұрын

Love this! Scott you’re amazing and you’ve given me the inspiration to restore my grandparents old furniture. Question though, every restoration video I’ve watched all paint the furniture after it’s been assembled and I’m wondering why it’s a bad idea to paint the disassembled parts before assembling them back together.

@FixingFurniture 2 жыл бұрын

Good question Izzy. You don't want paint or any finish in the joints when you assemble the furniture as it prevents the glue from adhering. Assemble first, then finish. Cheers.

@manuelsoul4699 2 жыл бұрын

Ottimo lavoro e spiegazioni dettagliatissime, grazie Scott 👍👍👍👍👍👍👍

@FixingFurniture 2 жыл бұрын

You're welcome Manuel. Thanks for sharing that

@richardgerhard7809 2 жыл бұрын

I do like your videos. You did end up with a nice leg. I'll start with constructive criticism. Surprised you didn't use you chop saw to cut one side, then flip it over and cut the opposite site side. Also surprised you used a portable planer, instead of table saw or bandsaw to cut the corners down on the block. Since using a portable hand planer, you could of rounded it more. before putting on the lathe. Using the gouge straight on, is like using a scraper. Plus you will have to sharpen more often, verses using a slicing the cut. If you propped up the leg on the back for a reference, easier to match the cut verses stopping often to see wear it matches. If you cut down-hill 15:17 you'll get smoother cut vs. up-hill 14:47. The angle going in makes a difference also 15:37, plus the speed (rpm) should be higher verses at the wider section. Helps to have a reference card for rpm for the different diameters next to the lathe. So you can change the rpm's as you go. I liked you section on color matching the leg, and application. Nice looking dust collection hood. The hood I have I ordered from Peachtree. Yours has much more chip collection. Leg came out real nice.

@FixingFurniture 2 жыл бұрын

Thanks for sharing your thoughts and tips Richard. I appreciate it. Scott

@swansong1851 2 жыл бұрын

I saw you use your right hand to draw the pencil lines. Are you right handed? The reason I ask is because you turn in the fashion of a left handed turner, or goofy-handed.

@FixingFurniture 2 жыл бұрын

Yes, I am right handed, but that doesn't always work well with recording videos so I switch according to the situation. Scott

@kokodin5895 2 жыл бұрын

it kind of feel like you could avoid half of that mess if you sized your blank better. it seems like lower part of the leg would fit in just the 2 middle layers, unless that extra mass was needed for stability of turning

@FixingFurniture 2 жыл бұрын

That's a good idea. To be honest, I didn't think of that. Thanks for the suggestion. Scott #Tip

@kokodin5895 2 жыл бұрын

@@FixingFurniture it was strictly pragmatic point of view, saw off bigger chunks, use less materials and maximize the profitby minimising the time and waste that and i also build some guitars in the past and sizing my blanks always made me do less mistakes and get faster to the desired effects. i never turned a thing but that was a tip from one of my books about turning bowls of all things

@28Cryptic743 Жыл бұрын

when I saw you sharpening the gouge by resting the back of the handle in the rest and holding the gouge against the grinding wheel I could imagine that it could easily grind too much off the tool and possibly pulling the tool into the wheel. I would rather have a tool rest that the blade would lie against to get the correct angle, then you could slowly push the blade into the wheel to achieve the sharp edge