Woodturning 101 - Video 8

Woodturning 101 - Video 8 - Turning a Box

Рет қаралды 107,022

Күн бұрын

In this video, Master Woodturner Kirk DeHeer demonstrates the process of turning a traditional lidded box with a slip-fit lid.
In this video, Kirk describes how to choose the right material for making wooden boxes and continues on to demonstrate the process step-by-step. Throughout the video, emphasis is placed on how to make efficient cuts that produce great results. In addition, proper tool use, chucking the box while turning and recommended methods of sanding and finishing are thoroughly covered. As always, proper sharpening techniques are covered as well as sharp, properly ground tools are one of the keys to success in all woodturning.
By learning the fundamentals of box turning, you too can create beautiful, functional boxes of all shapes and sizes that you can enjoy every day! Like our Woodturning 101 students, we’re sure you’ll find this video to be enjoyable and informative.
Timestamps:
0:00 - Intro
3:26 - Choose & mount a blank
5:26 - Rough the blank & turn tenons
15:00 - Layout & separate lid from body
19:38 - Turn the lid
34:12 - First fit of the lid
37:25 - Turn the inside of the body
50:17 - Second fit of the lid
55:14 - Turn the outside
1:04:11 - Sand and finish
1:10:38 - Final fit of the lid
1:16:05 - Turn the bottom
- LINKS AND RESOURCES -
CRAFT SUPPLIES USA - The Woodturners Catalog
Since 1982, woodturners have trusted Craft Supplies USA to provide them with the finest woodturning tools and supplies. We pride ourselves on providing exceptional customer service and stand behind the products we sell. Our goal at Craft Supplies USA is simple: to make doing business with us so enjoyable that you look forward to doing business with us again.
Phone: 1-800-551-8876
Website: www.woodturnerscatalog.com
Address: 1287 E. 1120 S. Provo, UT 84606
Email: service@woodturnerscatalog.com
Join our Email list for promotions, new products and more:
www.woodturnerscatalog.com/Em...
Download Allan Batty's Woodturning Notes (Free):
blog.woodturnerscatalog.com/20...
Visit our Woodturning Blog for how-to's and more:
blog.woodturnerscatalog.com?
View our Digital Catalog:
content.yudu.com/web/33r4n/0A3...
Subscribe to Craft Supplies USA:
kzfaq.info...
- SOCIAL MEDIA -
Facebook - / craftsuppliesusa
Instagram - / craftsuppliesusa
Pinterest - / woodturnerscat
Twitter - / woodturnerscat
#woodturning #woodturnerscatalog

Пікірлер: 73

@christopherharrison6724 20 күн бұрын

Very clear explanation thank you for clearing up those niggling problems that I haven’t figured out myself.

@thomaskila3801 Жыл бұрын

You are an excellent teacher, Kirk! Seriously. Over the past 16 years, I've taken several turning classes and watched hundreds of hours of video on the subject. Your explanations and demonstrations are definitely among the very best. I'm so glad I found this one!

@kendallcahan259 9 ай бұрын

I’ll be taking my first woodturning course in a few weeks, and am loading up on information to be prepared for the class. This series is so helpful, educational, and entertaining to watch. Glad I found these! Thank you.

@jamescarter8813 2 жыл бұрын

Nice work, and well explained Kirk. So glad that Craft Supplies put this series together.

@CraftSuppliesUSA 2 жыл бұрын

Thank you - glad you are finding it useful!

@naturesparks Жыл бұрын

great showing and explanation how to work a lathe! I viewed this video several times , its so good. I also really like the fact the chuck is made in Australia , Good choice!

@davidsoudek Жыл бұрын

Grandma can hulk tf up and feel the burn.. I want the pop sound!

@angusga Жыл бұрын

Man, I love your videos...

@CraftSuppliesUSA Жыл бұрын

Glad you like them!

@leftymcshea6876 Жыл бұрын

Best instructional video on box turning, by far. Many thanks! 👍

@chrish8294 Жыл бұрын

Fantastic video! Thank you Craft Supplies for this video series!

@markwoodcock01 2 жыл бұрын

Thank you Kirk for a very informative and enjoyable video. Best wishes from the UK

@PatLap 2 жыл бұрын

I’ve been holding my breath for the whole part of the bottom finishing! That Monsieur Kirk is a master! ☝🏼😲

@MH-qq3kj 2 жыл бұрын

Very enjoyable to watch the masters at work!

@jean-louishoules5198 2 жыл бұрын

Thanks from France Kirk for this master turning lesson full with precious details, precision and finition. Although it's in English language, and a little hard for me to understand every detail, I get a huge pleasure to follow your demonstration.👍

@CraftSuppliesUSA 2 жыл бұрын

So happy you find it enjoyable! Good luck with your turning.

@pjseiber2774 2 жыл бұрын

Thanks for sharing. Great work and a beautiful piece.👍😃👍

@skipproctor8979 2 жыл бұрын

Kirk, love the finished bottom. I've never tried a raise bead on the bottom of any box. It really adds to the look of the finished piece. Thanks! Skip

@markb8954 2 жыл бұрын

Great step-by-step tutorial. I’m pretty good at making lidded boxes, but I wing it. This video really provides the WHY details and the sequence! Thanks very much to you & Craft Supplies for “turning” these out. 👍

@CraftSuppliesUSA 2 жыл бұрын

You're very welcome!

@hrfici 2 жыл бұрын

This is a great instructional video; can't say thank you enough. Have a peaceful day.

@CraftSuppliesUSA 2 жыл бұрын

Glad it helped

@tomhoffman8873 2 жыл бұрын

Very well done Kirk. I am really enjoying your instructional videos.

@monopinion8799 2 жыл бұрын

I do appreciate your videos as they are informative, interesting and quite pleasant to watch and listen to. Thank you.

@hassanal-mosawi4235 2 жыл бұрын

Thanks for sharing those tips and the make!

@CraftSuppliesUSA 2 жыл бұрын

You're welcome!

@teresas683 2 жыл бұрын

As a newbie, I am determined to do it right. There are many videos that are fun to watch but this one was very educational - one I will refer to often. Thank you!

@brianrowland9993 Жыл бұрын

Great informative video - one of the very best I have seen with many good tips on using the various tools. Subscribed!

@Akaankh Жыл бұрын

These videos are incredible. Thank you.

@longdriver2 2 жыл бұрын

Great job Niel. You've done this once or twice before. Very smooth and beautiful finish!

@markneurohr9663 2 жыл бұрын

Outstanding!!! Very informative! 😎

@CraftSuppliesUSA 2 жыл бұрын

Thanks! Good luck with your turning!

@joepall323 2 жыл бұрын

Good Stuff right there! Thanks Kirk

@georgespyrou2144 Жыл бұрын

Thanks for sharing. A most interesting video.

@MikePeaceWoodturning 2 жыл бұрын

Great job, as usual, Dr. Kirk!

@CraftSuppliesUSA 2 жыл бұрын

Thanks you!

@stevenhansen8641 2 жыл бұрын

Thanks for sharing, thanks for the time and effort. I have purchased many tools from Craft Supply. Awesome catalog and great selection. Thanks Kirk for another great video

@MickyBellRoberts 2 жыл бұрын

Hi, I just aquired a lathe and am going to learn to turn. I am from Huntsville, Texas. I came across your channel and like what I see so subscribed.

@CraftSuppliesUSA 2 жыл бұрын

Welcome aboard!

@MickyBellRoberts 2 жыл бұрын

@@CraftSuppliesUSA Thank you.

@todds4101 2 жыл бұрын

Another great job on a video, Kirk! One of these days I need to get up to Provo. I've ordered a lot of of stuff from CS over the years but I've never actually dropped by to see the place.

@WoodArtVlogs 2 жыл бұрын

Wow amazing work

@kaygrant8757 3 ай бұрын

Kirk, you talk about using a friction polish. Which finish did you use?

@keithcarothers2643 2 жыл бұрын

Thank you so much for this video. Beautiful work

@CraftSuppliesUSA 2 жыл бұрын

You're welcome! Thanks for the comment

@TonatiuhMellado 2 жыл бұрын

Wow! 👌, thanks very much for sharing, amazing and well explain video, a lot of information nicely explained. Thanks so much again, for all the incredible series. Gracias gracias gracias

@CraftSuppliesUSA 2 жыл бұрын

You're welcome!

@michaelkramer363 2 жыл бұрын

Great video

@johnowens5751 2 жыл бұрын

Awesome ✌️

@jimzehner205 2 жыл бұрын

Thank you

@jmbcorreia72 2 жыл бұрын

Amazing and helpful video. It really hits two of my major issues with boxes.

@CraftSuppliesUSA 2 жыл бұрын

Awesome - good luck in your turning!

@jamesmcconnell9754 Ай бұрын

Mr. DeHeer, I have been searching for the negative rake box scraper that you use in this video and have not been able to find a match. If you could, please advise the manufacturer and where it might be purchased. Craft supplies doesn't seem to have it . Thank you in advance for your assistance.

@ned711 2 жыл бұрын

Very informative! I wonder, is a roughing gouge the right tool for shaping of the outside? Seems a bit bulky and indelicate for doing this work. Wouldn’t a scraper work better, or maybe a skew?

@TheTranq 2 жыл бұрын

Great video. I’m still a bit confused on the jam chuck at the end. I enjoy a suction pop fit

@leftymcshea6876 Жыл бұрын

The tool you use on the tenon of the base: is that a Bedan reground as a skew? Tanks!

@bradjunes1610 2 жыл бұрын

Many funny statements sir. Much appreciated----

@plmikado6444 2 жыл бұрын

Hello, Your video is very informative. Living in France, I unfortunately did not understand your explanations but the images clearly show the work and the position of the tools. What finish did you do on this box?

@CraftSuppliesUSA 2 жыл бұрын

www.woodturnerscatalog.com/p/17/2584/mylands-Friction-Polish

@jimjohnson1901 Жыл бұрын

Now that you're not broadcasting what brand is the friction polish? Also, can you tell me the angles of your tools? Neat video. Watched it twice! Jim J

@CraftSuppliesUSA Жыл бұрын

Thanks for the review! Myland's Friction Polish: www.woodturnerscatalog.com/p/17/2584/mylands-Friction-Polish As far as the angles go - give us a call at 1-800-551-8876 and we can tell you specifics for each tool

@johncearns7924 2 жыл бұрын

Dear: Kirk Deheer Loved the video. I would like to know what brand named Waxed Shellac was used in the video? Thank You in Advance John

@CraftSuppliesUSA 2 жыл бұрын

Mylands Friction Polish - www.woodturnerscatalog.com/p/17/2584/mylands-Friction-Polish

@bettycushing2849 2 жыл бұрын

I have a harbor freight lathe 12"x36" my problemnow is it stops on me dose matter what speed I have it on it stop. Could it be the cold cause its in its low 20 and I do'n't have heat in my shop so my question is could the cold be causing my problem with the lathe stopping BC, new wood turning

@sugengwidodo8863 2 жыл бұрын

👍👍👍🙏

@fredbounocore7242 2 жыл бұрын

What exactly is scratch free and where can I buy iy. Most important thanks for the fantastic tutorial. Fred Buonocore Shelter island ,NY

@CraftSuppliesUSA 2 жыл бұрын

Scratch Freee is a general purpose polishing wax. It's designed to be the final step in your sanding process. www.woodturnerscatalog.com/p/17/5652/dr.-kirks-Scratch-FREEE-Woodturners-Polishing-Wax

@bwrightaway2877 2 жыл бұрын

🤦‍♂️ I can't believe I've never thought of using a bendy straw to blow out sawdust. I normally just blow on it and get sawdust all stuck in my mustache and in my mouth. I'm gonna buy some bendy straws today! Lol

@ukcarver 2 жыл бұрын

Sorry but as a very experienced box turner I would never make a box that I hadn’t part turned maybe several times. Doesn’t matter how dry the wood was. Good box making is a slow process.

@tylersmith9868 2 жыл бұрын

Are you saying this box will have issues down the line?

@ukcarver 2 жыл бұрын

@@tylersmith9868 Yes it could have issues as when you hollow the box out you release tension in the wood. . But you need patience when box making. Always part turn boxes in advance.