Woodturning Art The captured wooden toy Spin Top Tutorial Part 1

Рет қаралды 13,944

5 жыл бұрын

Woodturning art is the captured wooden toy spin top tutorial part 1. This wood toy spinning top will stay right where you spin it. Learn to make a spin top in this DIY tutorial about wood tops. Click here to purchase materials for your wooden toy spinning top www.woodpopsgear.com
The captured wooden toy Spin Top Tutorial Part 2 • The captured wooden to...
If you are tied to a desk, talk on the phone or are stressed out this spin top is for you. The Executive Catch spin Top is designed to relieve stress by spinning a top that will stay in one place. You won't have to chase your spin top around your office. I use my spinning top while watching TV. Takes a little skill, but you will catch on.
This is installment number three in my Whimsical Spin Top series.
You can purchase one here. woodpops.com/product/woodpops...
I use a 1/2" Robert Sorby #840H Spindle Gouge which I absolutely love. It cuts like butta. amzn.to/2VqW7ZI
Digital Calipers - amzn.to/2UGBUuo
Woodriver Mini Tool set - amzn.to/2GFqymA
Help support my efforts at
/ woodpops
Check out my art work at woodpops.com/gallery
My workshops - woodpops.com/orlando-woodturn...
Use my image to make your own Executive catch top at woodpops.com/article-blog/the...
CREDITS:
music
www.bensound.com/
The Lounge
Red Blood Sun Kenta Firmament
Please Subscribe! Thank you.
**As an Amazon Associate I earn from qualifying purchases.**
Thank you.
#woodpops #crushedstoneinlay #woodturningart

Пікірлер: 42

@lourias 3 жыл бұрын

Nifty!

@user-bj3dd5zh8b 5 ай бұрын

Really cool! Love these

@rogerdalescott 5 жыл бұрын

Fantastic!

@jaymacry5911 5 жыл бұрын

Subscribed! Love this idea and the video, Roger.

@rogerdalescott 5 жыл бұрын

OK Jay! You are in my top ten. Thanks for helping out. Looking forward to our project.

@terryjones8360 5 жыл бұрын

I'm getting your template for free. Thank you for showing us how to do this and providing a template...

@rogerdalescott 5 жыл бұрын

OK Terry! You are in my top ten. Thanks for helping out. Looking forward to our project.

@randygleck6417 5 жыл бұрын

I’ll be getting one of the templates and can’t wait to make one of these tops!

@rogerdalescott 5 жыл бұрын

Randy way to go. We are gonna have some fun.

@rogerdalescott 5 жыл бұрын

@Randy Gleck need your address email me

@rogerdalescott 5 жыл бұрын

If you want a template Send me your address. Email me. askwoodpops@gmail.com. But I can only do so many. Act fast. Be sure to share this video (click above ) to your social community!

@rogerdalescott 5 жыл бұрын

Ok we have our 2nd review in from Les. "thanks for the template. I finished my first "catch top" today. Base and top out of oak with the help of your template, videos, and diagram (included with template). Turning, sanding, and finishing (with shine juice) took about two hours total. I estimate, once learned, the process should take me about 30-45 minutes. The template is an excellent guide. Edges are sealed to keep it strong enough to test widths while the lathe is turning. It would have been helpful to have the starting dimensions of the wood blank --especially the length. I added up the individual segment lengths to get to 71mm + 30mm for the chuck or roughly 4" x 2" for the blank (add a fraction for sanding as your skill level requires ;) WoodPops' video describes three tools he created for the project. Since I don't have these, I found myself using my parting tool and smallest detail gouge exclusively after roughing out there basic form with a 3/4 inch spindle gouge. Sanding from 80 - 400 grit was fast and easy. My finished top does not spin well but it does catch perfectly. This seems to be a function of the catch bowl rather than the top (it spins fine on the table). I believe the bottom of the catch bowl may not be curved (cupped) as shown on the plan. I look forward to correcting this error on my next attempt. Fun little project made easy with the template and videos. Recommended!

@pamhoven 5 жыл бұрын

Very cool! I’m looking forward to making this.

@rogerdalescott 5 жыл бұрын

Thank you Pam. I'm going to Factur tomorrow to make you a template, I hope you make lots of Executive catch tops.

@pamhoven 5 жыл бұрын

Roger Dale Scott I hope to! Thank you!

@rogerdalescott 5 жыл бұрын

@@pamhoven Alright alright alright!

@turtlee5252 5 жыл бұрын

I can't wait to get my template and share how it worked for me.

@rogerdalescott 5 жыл бұрын

@turtlee5252 I don't have you in my registrations. If you want to participate please email me for the requirements and give me your address. Thanks for subscribing.

@rogerdalescott 5 жыл бұрын

The ten FREE templates have been mailed. Check back in a couple of weeks to read the reviews. You can purchase one here. woodpops.com/product/woodpops-executve-catch-top-template/

@rogerdalescott 5 жыл бұрын

Ok we have our first review in from Jerry. Here it is. "@Roger Dale Scott, Found some shop time, made 2 catch tops, first one walnut, cut the bell or skirt to short so had to glue on a piece of maple, to extend it down . So make a tower of walnut and maple. to match. Almost wore out the switch on the lathe, going back and forth checking with template and reviewing videos # 1 and 2. Top #2 made out of madrone, with a spalted maple tower. Went much faster as i was more familiar with the turning order, and did not have to consult the videos.Both tops weighed on my scales at 21 grams. Second top was spot on with the template. My suggestions ,DO NOT ATTEMPT TO MAKE UNTIL YOU HAVE A TEMPLATE, its sooooo much easier than measuring all the time.Please subscribe to Rogers channel, lets get him his 1000 subs.Order the template and go to the shop and gather your materials, when you have the template, you will be ready to make some fun catch tops. I will be making more for my kids and grand kids as Christmas gifts. Thanks Roger for making such a great product available." Later Jerry Show less

@rogerdalescott 5 жыл бұрын

Be sure to watch "How to Inlay Crushed Stone into Wood Turnings - The Prep" and share it! Releasing 5/13/2019

@jonmccarver5688 5 жыл бұрын

I can't wait to get my template so I can make a bunch of these , I will come back and let you know how it works for me.

@rogerdalescott 5 жыл бұрын

Ok Jon you are in.

@mattwooley4894 5 жыл бұрын

I am gonna get a template when I make one ill share how it works can't wait

@rogerdalescott 5 жыл бұрын

Thank you Matt. I'm going to Factur tomorrow to make you a template, I hope you make lots of Executive catch tops.

@emgiwoodworks 4 жыл бұрын

Have been looking at this for a long time and now I've finally started my first attempt. The Catch Top I made yesterday and it came out OK'ish although the outside is about 1mm undersize, all other dimensions are fine. Other than that it looks good, spins nice and I will have a go at the base later today. Can't wait to test it! I really like this idea, surprising that it didn't get more views. A lot of people may find this project challenging. Working to such specific dimensions is always harder than just free-handing. In fact that also was what kept me back for a while but when I made the Top yesterday, I found it easier than anticipated. So now with the more diffcult part already finished, I am really eager to finish the project. If I ever manage to make a working version I will post a demo-vid with credits to the original creator. /Leo

@rogerdalescott 4 жыл бұрын

Thanks Leo. These are great fun. Keep at it. Are you using the template?

@emgiwoodworks 4 жыл бұрын

@@rogerdalescott Sorry Roger, I don't have one. As often I'm making a trial-piece first to determine a project's feasibility and I always do that with the tools at hand. This one worked out nicely and I made a 1:30 video of it with credits & all. Can I show it to you as a preview so that you can give the go-ahead for publication?

@rogerdalescott 4 жыл бұрын

@@emgiwoodworks Sure thing.

@emgiwoodworks 4 жыл бұрын

@@rogerdalescott Here it is: kzfaq.info/get/bejne/j7iIndl4vrSUp3U.html Currently Unlisted; to be published after you give the OK. /Leo

@emgiwoodworks 4 жыл бұрын

@@rogerdalescott Sorry! New URL: kzfaq.info/get/bejne/eqiDp9WDsp-YlnU.html

@chrisbowman6643 5 жыл бұрын

Subscribed. I'm signed up to get your free template and I'm looking forward to make one. Very helpful videos.

@rogerdalescott 5 жыл бұрын

OK Chris! You are in my top ten. Thanks for helping out. Looking forward to our project.

@chrisbowman6643 5 жыл бұрын

@@rogerdalescott , thanks for the template. I finished my first "catch top" today. Base and top out of oak with the help of your template, videos, and diagram (included with template). Turning, sanding, and finishing (with shine juice) took about two hours total. I estimate, once learned, the process should take me about 30-45 minutes. The template is an excellent guide. Edges are sealed to keep it strong enough to test widths while the lathe is turning. It would have been helpful to have the starting dimensions of the wood blank --especially the length. I added up the individual segment lengths to get to 71mm + 30mm for the chuck or roughly 4" x 2" for the blank (add a fraction for sanding as your skill level requires ;) WoodPops' video describes three tools he created for the project. Since I don't have these, I found myself using my parting tool and smallest detail gouge exclusively after roughing out there basic form with a 3/4 inch spindle gouge. Sanding from 80 - 400 grit was fast and easy. My finished top does not spin well but it does catch perfectly. This seems to be a function of the catch bowl rather than the top (it spins fine on the table). I believe the bottom of the catch bowl may not be curved (cupped) as shown on the plan. I look forward to correcting this error on my next attempt. Fun little project made easy with the template and videos. Recommended!

@stevesizelove6925 5 жыл бұрын

I am getting a template and making this top. As soon as I complete my top I will share it with you

@rogerdalescott 5 жыл бұрын

Thank you Steve. I'm going to Factur tomorrow to make you a template, I hope you make lots of Executive catch tops.

@rogerdalescott 5 жыл бұрын

@Steve Sizelove please email me your address

@rogerdalescott 5 жыл бұрын

Roger Dale Scott If you are wondering what's up? I have a challenge taking place. Ten wood turners will get a free template for the catch top. They will use it to make a top within 10 day of receiving the template in the mail. They will come back here to the comments after making their catch top and give us their honest review of how it helps make a catch. That's it. No Catches. heeheeeheee My bad.

@rogerdalescott 5 жыл бұрын

jockmac49 has subscribed to my channel. Thank you.

@rogerdalescott 5 жыл бұрын

turtlee5252 has subscribed to my channel. Thank You.

@rogerdalescott 5 жыл бұрын

cpbenjie just subscribed to my channel. Thank You.