Woodturning | More Bamboo & Resin!

Рет қаралды 515,891

Жыл бұрын

Hello, friends!
Come check out our brand new shop launch! formanwoodworking.com/
_____________________________________
After how well the last bamboo bowl came out (if you haven't seen it yet, link is here: • Woodturning | Bamboo &... ), I just had to try another. And this time, I decided to lay the bamboo segments down instead of standing them straight up. I took a long look through all the colour/mica suggestions you all made (they were amazing, by the way!), and after many hours of deliberation, I settled on black and red. If this colour combo isn't quite your cup of tea, by all means, keep the suggestions coming! I will certainly do more of these in the future.
For those wondering why I left the bowl so thick, I have unfortunately learned the hard way that bamboo (the outside of the shaft, at least) really doesn't bind to resin well. That's probably because I forgot to rough up the bamboo surface with some sand paper before doing the resin pour. Lesson learned! While turning the outside of the bowl down, I had a bad catch on the cutting tool and one of the bamboo shafts fired right out from the rest of the blank! Thankfully, I was able to get the shaft back in with a little bit of sanding and some CA glue, and in the final piece, you can't even tell that anything went wrong. However, I really didn't want to push my luck with making the walls of the bowl too thin; my fear was that all the bamboo might fly out. And, so, we have a thick bowl! I hope you enjoy.
_____________________________________
Check out my Instagram! formanwoodw...
_____________________________________
Want to use the same pigments shown in this video? Check out the following affiliate code for a discount on SquidPoxy products! squidpoxy.ca/?sacode=duo8gk&u...
_____________________________________
Key equipment/products I used:
Rikon 70-220 VSR Midi Lathe: www.leevalley.com/en-ca/shop/...
Woodstock 1/2 inch bowl gouge: www.amazon.ca/gp/product/B005...
Hamlet 1/8 inch parting tool: www.elitetools.ca/en/product/...
Alumilite clear cast: www.alumilite.com/resins/amaz...
SquidPoxy mica pigments: squidpoxy.ca/products/mica-po...
Black Diamond mica pigments: www.blackdiamondpigments.com
CA Technologies Resin Casting Pressure Pot: www.finishsystems.com/product...
Yorkshire Grit: www.woodsleesummercraft.ca/pr...
Music provided by Epidemic Sound
Sunrise Stadium - These Old Bones
Counting the Hours - Tomas Skyldeberg
To Where All The Rivers Go - Tape Machines
Hey Should Have Been Me - Onda Norte

Пікірлер: 207

@barry.w.christie 11 ай бұрын

I've seen bamboo/resin bowls before, but this is the first with the bamboo in this particular orientation ... the shapes and grain of the bamboo is amazing, which together with the resin has resulted in an absolutely stunning piece 👍

@confused837 Жыл бұрын

What a fantastic piece of work, just amazing.

@jaysontwombly8261 Жыл бұрын

Another great piece! I love how thick you left it. Very nice shape. And the grain of the bamboo looks so neat in the resin. Really great.

@formanwoodworking Жыл бұрын

Thank you, Jayson, and I'm glad you like the thicker look! "Thin" seems to be in these days for bowl turning, but I personally like the feel of a heftier bowl!

@paintcandan5972 Жыл бұрын

so glad youtube recommended your channel to me. they obviously have learned my interests extremely well. love all your resin work, pretty sure i watched everything. your work abounds in style and creativity, putting your spin on common concepts as well as your own brand new ideas. looking forward to your future posts!

@formanwoodworking Жыл бұрын

Thank you so much, my friend! That's very kind of you to say!!

@alanlucas4964 Жыл бұрын

Just seen this. Absolutely beautiful. What board do you use as the mould?

@marycatherinelebouef-op4hf Жыл бұрын

That is one of the coolest creations I’ve ever seen! Absolutely stunning!

@AllenOxendine Жыл бұрын

Amazing Piece and interesting process, thanks for sharing. Full View and Like 👍

@formanwoodworking Жыл бұрын

Thank you! And thanks for the support! It means a lot

@shardzard2365 Жыл бұрын

The coolest thing about this bowl is the way it taught me to say good job in 3 languages.

@kenfrenchu7917 Жыл бұрын

VERY nice!

@jewelator Жыл бұрын

I agree with your opinion. It is also interesting to know your opinion about my videos. In one of the videos, I made a knife from the Dune movie out of a bolt.

@juliesadler6481 Жыл бұрын

Yup, you are a true Artisan. Stunning stuff. 🌟💞🌟

@formanwoodworking Жыл бұрын

Thank you, Julie!

@juliesadler6481 Жыл бұрын

@@formanwoodworking Thanks so much for sharing your talents with us!

@kevdimo6459 Жыл бұрын

That’s a beautiful piece of art! You’ve also chosen a great accompaniment with the music.

@russellhobbs7245 Жыл бұрын

Lovely piece. I've never seen anyone else do this with bamboo but it has produced beautiful results. Great work 👍

@formanwoodworking Жыл бұрын

Thank you, Russell!

@tendring_woodturning 7 ай бұрын

Great project, very inspirational. Thanks for sharing. 👍👍😊😊😊

@woodworkingtalent Жыл бұрын

This is really a unique and extraordinary work of art...👍👍

@billy19461 Жыл бұрын

Got to try one!

@kam70111 Жыл бұрын

Characterful medium to work with. Beautiful.

@hughjass1044 Жыл бұрын

The extra time and effort for the two color resin was well worth it. Very pretty piece.

@formanwoodworking Жыл бұрын

Thank you so much!

@tonyprofera9914 Жыл бұрын

Well done! What an interesting effect. Thanks for sharing it with us!

@formanwoodworking Жыл бұрын

Thank you, Tony! I appreciate the comment and the support!

@jonathondunn9190 Жыл бұрын

Kind of makes it look like a optical illusion, stunning!

@formanwoodworking Жыл бұрын

Thank you, Jonathon!

@billyborden7447 Жыл бұрын

You turn the coolest things! Incredible job!!

@formanwoodworking Жыл бұрын

Thanks, Billy!

@noname-ve7wo Жыл бұрын

Green and white would look cool too. But this is awesome great job 👍

@user-brobdingneg Жыл бұрын

Классная получилась пепельница! Похожа на какой то звездолет из Пятого элемента! 🤓😆

@Susan0716able Жыл бұрын

I just now subscribed to your channel when it showed up on my feed. Love it already. Your bamboo pieces are awesome! Thanks, Dave.

@formanwoodworking Жыл бұрын

Thank you so much!

@maxim7377 Жыл бұрын

Красота...фантазия на высоте...

@youtukangshop Жыл бұрын

Thanks

@NikiNiki-hc3ex Жыл бұрын

Браво майсторе,успехи,живот и здраве,поздрав от България.

@kellymoses8566 Жыл бұрын

Stop murdering Ukrainians. Хватит убивать украинцев.

@swiftgabe1 Жыл бұрын

Well done! Such an interesting piece!

@formanwoodworking Жыл бұрын

Thank you!

@jonlee7918 Жыл бұрын

A beautiful job I would not have mentioned what it was made of I would let people guess what it was made of really fabulous.

@youtukangshop Жыл бұрын

Excuseme

@gillesetien5915 Жыл бұрын

Réalisation originale et quelque peu exotique. Bravo.

@stevekrupa6209 9 ай бұрын

Brilliant!!!!

@logananderon9693 Жыл бұрын

Resin and hotglue: The cornerstones of all traditional woodworking.

@ssjohnny Жыл бұрын

Just amazing creativity! Very cool design. Glad I found your videos.

@formanwoodworking Жыл бұрын

Thank you so much for the support and kindness, Johnny! Appreciate it!

@Qaetan Жыл бұрын

The algorithm led me here, and I'm so glad it did! I've never seen bamboo used in woodturning videos before, and I love the effect you created with the resin!

@formanwoodworking Жыл бұрын

Thank you so much!

@anuhngara5552 Жыл бұрын

Wooowww.lebih istimewa dari yang saya temui divideo2 sebelumnya

@maantone6399 8 ай бұрын

Absolutely beautiful and so creative even more impressed that you started by watching KZfaq videos and self taught yourself- very inspirational 👍🏿

@DonnyRP Жыл бұрын

Again great work.

@jewelator Жыл бұрын

I agree with your opinion. It is also interesting to know your opinion about my videos. In one of the videos, I made gold earrings out of ordinary pasta.

@cowboykelly6590 Жыл бұрын

😯 Absolutely Stunning ! You've breathed such beautiful life into your creation . Lovely . Much Respect. 🤠🖖 ♨️

@Smallathe Жыл бұрын

Very cool!!!

@ScenicCityWoodturning Жыл бұрын

That looks great! Such a neat affect, nice job👍🏻

@formanwoodworking Жыл бұрын

Thank you so much!

@valdiralvesdasilvaalves7504 Жыл бұрын

Certamente um excelente trabalho. Uma peça belíssima 👏👏👏

@travisanderson6127 Жыл бұрын

I love that ashtray in the thumbnail

@antfactory_kit Жыл бұрын

This is amazing.. 👍 Thank you for a nice video!!

@formanwoodworking Жыл бұрын

Thank you so much!

@andreamagistrali4514 10 ай бұрын

Hamazing! 👍👍👍👍

@DaveANeely Жыл бұрын

Pretty kool bowl

@_zhawkeye_9808 Жыл бұрын

...very cool idea...and it turned out looking great! I think the thicker walls worked out well as they left the oblong bamboo/resin sections inside the bowl...otherwise you may have turned all the resin away and left just a small strip of bamboo... Well done...👍

@formanwoodworking Жыл бұрын

Thanks so much!

@bwrightaway2877 Жыл бұрын

Super Cool! Nice work

@mildredgivens8246 Жыл бұрын

Just beautiful

@palavadiy Жыл бұрын

Perfect work

@BigBear21740 Жыл бұрын

This is the second video I've watched of yours and its still more interesting than some of the stuff Andy Philips does. Very unique concepts very well done.

@formanwoodworking Жыл бұрын

Thank you so much, Kevin! That's very kind of you to say (big Andy Philips fan here myself!)

@anandgoswami3460 Жыл бұрын

Very very beautiful.

@moisesmunos7211 Жыл бұрын

A beautiful job . Very good ! ! !

@formanwoodworking Жыл бұрын

Thank you!

@bigboy9706 Жыл бұрын

New subscriber here. Just watched this video. That's a beautiful bowl

@formanwoodworking Жыл бұрын

Thanks for the support, Michael! I sincerely appreciate it!

@Stinkerbelle62 Жыл бұрын

Beautiful work

@apopope72 Жыл бұрын

Beautiful piece.

@dougarcher3976 Жыл бұрын

Super clever!

@jewelator Жыл бұрын

I agree with your opinion. It is also interesting to know your opinion about my videos. In one of the videos, I made gold earrings out of ordinary pasta.

@richardthompson7600 Жыл бұрын

Another brilliant piece of work 👏

@formanwoodworking Жыл бұрын

Thank you, Richard!

@clarissasartors2118 Жыл бұрын

Beautiful!

@MEGAMIGA Жыл бұрын

So nice!

@mountainviewturning5319 Жыл бұрын

Looks great 👍

@formanwoodworking Жыл бұрын

Thank you!

@putrametallicagen7996 Жыл бұрын

Beautiful n so artistic..

@MegaForrestgump Жыл бұрын

Could you crisscross the bamboo? I wonder how cool that could look. Excellent piece!

@formanwoodworking Жыл бұрын

I've had the exact same thought! Still trying to work out how I might accomplish that

@erwinhermawan195 Жыл бұрын

Fabulous item,,,,

@domazzONE Жыл бұрын

Awesome job!

@formanwoodworking Жыл бұрын

Thanks, Megan!

@user-rl6si9qs6f Жыл бұрын

Красивая чаша!

@mr.zbych1002 Жыл бұрын

Gratuluję pomysłów

@auxproxprox5252 Жыл бұрын

Really nice collors

@sufriadyedy Жыл бұрын

VERY GOOD

@rebeccamyott7041 Жыл бұрын

VERY COOL.!!!!

@TazioCostantini Жыл бұрын

Hi, I didn't know your channel, I discovered it by chance; I also do similar things but not so beautiful, you have beautiful ideas and you realize them very well! 👏👏👏 Bye😊

@formanwoodworking Жыл бұрын

Thanks so much, Tazio!

@elizabethlevison5928 Жыл бұрын

Love it!

@formanwoodworking Жыл бұрын

Thanks, Elizabeth!

@spindlesworkshop9744 Жыл бұрын

That is 😎 cool

@formanwoodworking Жыл бұрын

Thank you!

@raghbirsingh6192 Жыл бұрын

Amezing❤

@alessandroalberto6431 Жыл бұрын

FIGO !!!!!!!

@adilliosz Жыл бұрын

Love these designs. They're too expensive for me though.

@user-fm1je1pe5i Жыл бұрын

La BOMBA!

@ismailozcan6793 Жыл бұрын

hello from turkey 🇹🇷🇹🇷🇹🇷

@thayphucvl Жыл бұрын

beautiful

@christiereynolds1335 10 ай бұрын

I want one. Badly. Name your price. Love your work. I subscribed. Relaxing watching you.❤❤❤❤❤

@formanwoodworking 9 ай бұрын

Thank you, Christie! Unfortunately, this one has already been sold, but if you'd like to see some of our other pieces for sale, you can see them here: formanwoodworking.com/

@user-ru4kc7vt1u Жыл бұрын

Это потрясающе!

@user-ei4rb6sd7t Жыл бұрын

Шикарно!

@luzmancheno8558 8 ай бұрын

Belleza ❤

@5minuteturnings Жыл бұрын

You are so amazing

@robertjohnston4304 Жыл бұрын

Looks Amazing. May I ask where you found the bamboo tubes at? I would love to try a project like this myself someday.

@formanwoodworking Жыл бұрын

Thank you! And I got mine personally at: bambootoronto.ca/

@carlossavi877 Жыл бұрын

Parabéns ,muito Bonito o seu trabalho

@user-tg2pg9tr3z Жыл бұрын

ماشاء الله تبارك الرحمن تسلم ايدك عمل فني جميل تحياتي لك من فلسطين غزه

@rrommens4527 Жыл бұрын

Gorgeous…

@tabathacole Жыл бұрын

🦋beautiful🦋

@formanwoodworking Жыл бұрын

Thank you, Tabatha!

@showkathossain1088 Жыл бұрын

Nice

@sidneifelix8456 Жыл бұрын

Perfect top show beautiful beautiful

@eliasfajardo6148 8 ай бұрын

another awesome piece of art. QQ. to you, which is the most "boring" part of the process?

@youtukangshop Жыл бұрын

Good

@Nievesspecial Жыл бұрын

This is an absolutely beautiful piece, well done! I have a couple of questions if you don't mind? What was the glue you used at 3:13? And do you find that's always secure enough? It certainly seems to pay dividends with ease of removal compared to gluing more conventionally. I'm also curious about the kind of chunky design with the thick walls. Was that a purely aesthetic choice? Or is that something you find necessary working with resin (I have never made a resin bowl).

@formanwoodworking Жыл бұрын

Thank you so much! And it's just hot-glue! I've been told by some folks not to mount my pieces this way, as they argue it isn't a very secure method (and there's a danger of it flying off), but I've never had the slightest issue with it. Carl Jacobson does some of his work this way, and he says the key is using a very hot glue gun (the glue should be smoking when it comes out). This way, the glue is so thin that it can really grab well to your project and the waste block. If you only have a cheap craft glue gun, it might be too cool to bind well. And yes, it makes life pretty easy when it comes to taking it off the lathe and remounting on the chuck. It only takes me a minute or two to remove the glue with a parting tool, and then it just pops off. As for the thickness, no, that was not intentional :( I do like my bowls a bit thicker than most, but this was the result of one of the bamboo pieces actually breaking free of the resin and flying out while I was turning the piece. Turns out, the outside of bamboo is very smooth, and it doesn't bind to resin very well (in the future, I'll just take some sand paper to the bamboo first and scuff it up a bit before doing my resin pour). I was thankfully able to get the bamboo piece back into the rest of the bowl with some CA glue, and you can't even tell now, but when it came to hollowing out the inside of the bowl, I really didn't want to push my luck with thin walls. I was worried more bamboo pieces would just break free. Lesson learned!

@Awen_newA Жыл бұрын

This is the third video I'm watching after I saw the jade bowl pop up 30 minutes ago haha. Hooked! You have a style I feel completely. Classic, timeless, modern. I can imagine it in simplistic homes combined with concrete. Which will make your pieces stand out even more. Less is more as you prove. SUBSCRIBED!

@formanwoodworking Жыл бұрын

Thank you so much for the support, my friend! I sincerely appreciate it!

@nandovialta1 Жыл бұрын

Show!!!

@Kim-fy5xd Жыл бұрын

I so want this for my husband. We are retired in Philippines and they use bamboo for so many things. Just another way to show beauty of Bamboo. Where can I buy?

@formanwoodworking Жыл бұрын

Hi Kim! This will be for sale in the next two weeks when our online store goes live, so check back here for updates!

@plugger410 Жыл бұрын

Can we all pitch in and help this guy get a miter saw?

@formanwoodworking Жыл бұрын

I actually just got one!!! Excited to use it for some upcoming projects

@jorgevaldiviezoperez4897 Жыл бұрын

Exelente 👍🏻

@dawnbigwarfe6871 Жыл бұрын

Cool

@rroe5718 27 күн бұрын

Excellent video on a process that I would like to try. Never worked with bamboo before. Notice you used Alumilite clear cast which I have worked with before. Directions state for thickness not over 3/8" (9mm). You are pouring much thicker......did you have any issues and possibly why didn't you go with Alumilite Amazing Deep Pour?.........Thanks