Woodturning | The Emerald Walnut Bowl

Рет қаралды 13,881

Жыл бұрын

This bowl will be available for purchase soon, but until then, check out our other pieces at: formanwoodworking.com/
_____________________________________
Today's video: I'm sure some of you have already guessed this, but yes, I copied myself! Four weeks ago, I made a bowl from planks of purpleheart mixed with epoxy resin dyed with a satin white mica pigment (link here if you haven't seen it: • Woodturning | The Fros... ). It was an absolute blast to make, and to date, I think it's one of the best bowls I've ever made. Because of how fun the process was, I just had to do a second, and for this bowl, I decided to go with a darker look. For the wood, I used planks of walnut, and for the resin, I dyed it with a bright emerald green mica pigment. Outside of that, everything in the build process was identical to the purpleheart bowl (with the exception of letting the wood oxidize). What do you think? As with many of my projects, I think this idea is infinitely repeatable with different wood species and pigments, but before I revisit this idea yet again, I have a long list of exciting projects I'd like to get to first! Be sure to keep a look out for those, and as always, thanks for watching!
_____________________________________
Want to use the same pigments shown in this video? Check out the following affiliate code for a discount on SquidPoxy products! squidpoxy.ca/?sacode=duo8gk&u...
_____________________________________
Check out our Instagram! formanwoodw...
_____________________________________
Key equipment/products I used:
Rikon 70-220 VSR Midi Lathe: www.leevalley.com/en-ca/shop/...
Woodstock 1/2 inch bowl gouge: www.amazon.ca/gp/product/B005...
CA Technologies Resin Casting Pressure Pot: www.finishsystems.com/product...
Magic Resin 2” Deep Pour: www.amazon.ca/dp/B08VW5RPVK?p...
Waterlox Original Varnish: waterlox.com/original/

Пікірлер: 57

@stevedoolanTacoma Жыл бұрын

When you watch a lot of KZfaq videos like I do you learn to identify certain things to locate the content creator. Axeminster tools are a dead giveaway that it's the UK. Every measure in inches gives away the Americans and Robertson head screws says your Canadian. Great bowl, keep em coming.😎

@formanwoodworking Жыл бұрын

😂😂😂 All I can say is, you're right! 🇨🇦

@formanwoodworking Жыл бұрын

And thank you!

@littlecreekbowclub5288 10 ай бұрын

I love your videos! You combine making beautiful pieces, short 10-12 minute length and no talking, nothing ruins a video more than a constant monologue that no one wants to hear. Thank you!!

@formanwoodworking 10 ай бұрын

Thank you so much! Glad you enjoyed the video!

@mjrulez100 Ай бұрын

Beautiful elegant bowl.

@GabiFodorrasRO Жыл бұрын

Un mare like 👍👍 Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍👍👍😎

@barry.w.christie 11 ай бұрын

I love this method of spacing the wood out so that resin can flow in between, brilliant idea ... the end result is absolutely fantastic 👍 At the time I watched this it had over 5k views but only 276 likes ... I just don't understand how someone could not like this ... personally, if I have found a video enjoyable to watch then the least I can do is like it, especially considering the amount of time and effort put into not only creating the video, but the the time in creating the content of the video😏

@formanwoodworking 11 ай бұрын

Thank you, Barry! And thank you so much for the like and support, it's greatly appreciated!

@sidneifelix8456 Жыл бұрын

Perfect top show beautiful beautiful

@formanwoodworking Жыл бұрын

Thank you, Sidnei!

@jaysontwombly8261 Жыл бұрын

Wow!!! Love this piece! That particular shade of green works soooo well with that wood. Love that color combo. Beautiful turning.

@formanwoodworking Жыл бұрын

Thank you so much, Jayson!

@JOHNSmith-pn6fj Жыл бұрын

Fantastic Bowl. Outstanding choice in colors of the wood and resin.

@formanwoodworking Жыл бұрын

Thank you, John!

@queamin Жыл бұрын

Nice Bowl.

@formanwoodworking Жыл бұрын

Thank you, Ken!

@frann.8879 Жыл бұрын

That walnut finish is incredibly beautiful, super talented!!👏👏🌟🌟👌👌😁😁

@formanwoodworking Жыл бұрын

Thank you, Fran!

@cathylebouef4026 9 ай бұрын

Another gorgeous piece! So beautiful. Great job!

@Leafgt660 Жыл бұрын

Just started watching your videos. I enjoy them as I am always looking for ideas. I have much Bamboo so I will do something like that. I also have purple heart but waiting on right project for it. I will be watching.

@formanwoodworking Жыл бұрын

Thanks for the support, Eli!

@AllenOxendine 11 ай бұрын

Beautiful Piece and interesting process. Full view and Like 👍

@formanwoodworking 11 ай бұрын

Thank you, Allen!

@StanWatt. 6 ай бұрын

A lovely piece.

@occasional-gifts Жыл бұрын

Thanks for the entertainment. I do many projects similar. Good Job

@formanwoodworking Жыл бұрын

Thank you, Ken!

@timponder7487 Жыл бұрын

Love the pattern very creative green goes good with walnut

@formanwoodworking Жыл бұрын

Thank you, Tim!

@lyndaowen2154 9 ай бұрын

That is such a beautiful design just gorgeous. What makes it better is the fact that green is my favorite color in just about any shade. Your skill level tells me you’ve probably been at this a while, so would you tell me why you wet sand? Is that a special sandpaper? Yes I am a newbie I’ve had my lathe since February 2023 and this is August 2023. I still have a lot to learn and hope you don’t mind questions about things I’ve never seen before.

@formanwoodworking 9 ай бұрын

I wet sand for two reasons: 1) it helps reduce sanding dust from getting into the air, which both keeps the workshop more clean and also makes me feel better about what I'm breathing (I always have a respirator on in the shop, even while wet sanding, but it still gives me a bit more peace of mind), and 2) I usually find it sands better. Anything with resin in it will clog your sandpaper incredibly fast, but the water helps suspend the particles, allowing for an easier sanding experience. Wet sanding is by no means a necessity (it does introduce the danger of wood expansion/cracking, which you need to consider), but I generally prefer it over dry.

@lyndaowen2154 9 ай бұрын

@@formanwoodworking thank you for the info

@jamnjef1 Жыл бұрын

nice bowl Davis 😉

@formanwoodworking Жыл бұрын

Thank you, Jeff!

@sovietbear1917 Жыл бұрын

Beautiful work as always!

@formanwoodworking Жыл бұрын

Thank you!

@user-pp6ds2jd9j Жыл бұрын

👍👍👍

@jay-in-az Жыл бұрын

Nicely done! Very creative

@formanwoodworking Жыл бұрын

Thank you, Jay!

@ryadice Жыл бұрын

Beau travail l'ami

@tomlauritzen9522 Жыл бұрын

That is gorgeous! As a after thought, I wonder if a cut slot on the rim of the bowl filled with matching green resin would have topped off the look of the bowl by continuing the lines through out. Just a thought... You do wonderful work. t

@formanwoodworking Жыл бұрын

Thank you, Tom! And thank you for the idea!!!

@_zhawkeye_9808 Жыл бұрын

...man, that's gorgeous!...love walnut...and green...so I can't help but love it...👍 So, I have a small lathe in my packed garage and no room for a dedicated sharpening system...I use my 6x9 belt sander for my spindle tools. I don't have a bowl gouge as yet...it looks like you use a standard grind bowl gouge for most of your work...is that correct? I see so many others using fingernail grinds but I don't feel confident about sharpening one on the belt grinder...but if a standard grind can do what you do, I'd look into getting one... Thanks, Matt

@formanwoodworking Жыл бұрын

Thank you, Matt! And yes, I just use a standard bench top grind bowl gouge, and I sharpen it on an 8 inch bench top grinding wheel. I'm not very experienced with free hand sharpening, so I use a guide to help get a more consistently round and angled sharpen. In case you happen to find some room for a grinder down the road, this is the guide I use: www.leevalley.com/en-ca/shop/tools/sharpening/jigs-mounts-and-rests/101416-vari-grind-accessory-for-wolverine-basic-sharpening-jig

@_zhawkeye_9808 Жыл бұрын

@@formanwoodworking ...thanks so much for the information...will definitely check it out... And I look forward to what you have for us coming up...👍 Matt

@finallyhappy2245 7 ай бұрын

Beautiful, what is the material you use to wrap the form?

@jamesslimjim8069 4 ай бұрын

Ive been doing epoxy and wood work for a few years now. I just recently bought a lathe and am excited to turn some projects. Got any advice or tips for a semi newbie?

@terrytenley9327 9 ай бұрын

Where do you get the plastic to make the outside of the bowl… Pretty contrast of walnut and green..!

@formanwoodworking 9 ай бұрын

Thank you, Terry! And I get that material from Michael's craft store! It's essentially just a flexible plastic poster they have in their poster section

@terrytenley9327 9 ай бұрын

@@formanwoodworking oh my.. thank you.. so the product is sold in sheets and not rolls? ☺️👍

@larrystrickler4270 Жыл бұрын

I am a beginner turner and would like to know how you cut your angles on the miter saw. Thanks

@formanwoodworking 11 ай бұрын

Hi Larry! For this project, I had my foam bottom (the bottom of the mould) cut out before I started cutting any of the wood pieces. Once I cut out the centermost most pieces, I placed those on the foam circle, and from there, I was able to get a good idea of what angle I'd need to cut the next adjacent pieces to maximize their size within the circle (I used an angle finder to get a precise idea). I then did the same thing for the next adjacent pieces, which I believe were cut at a 50 degree angle.

@dawnbigwarfe6871 11 ай бұрын

Where did you get the plastic film that you put around it

@formanwoodworking 11 ай бұрын

Hi Dawn! That's just a foam poster board I pick up from Michael's (the kind you might have used in school for poster projects).

@jrk1666 11 ай бұрын

don't think I even seen someone use that grind on a bowl gouge, which one is it ?

@formanwoodworking 11 ай бұрын

Honestly, I'm not sure. I started turning before I learning anything about different grind angles on bowl gouges, and I became so used to the kind I was grinding by hand, I just stuck with it :) I'd say it's probably closes to a 40/45 degree angle