Woodturning - Walnut with Designer Epoxy (The Flashy Bowl)

Рет қаралды 75,959

3 жыл бұрын

Woodturning - In this video I combine five different colors from Designer Epoxy to make this incredible flashy bowl! I was able to core a second bowl from this awesome blank as well, enjoy! Thanks again to Ahron Gropper for the inspiration for this piece! Here is his channel, drop by and checkout his awesome work! / ahronafricanmeat
Starbond Adhesives: USE CODE: INLAYJIM for 10% OFF
www.starbond.com/
Sandpaper.ca USE CODE: INLAYJIM for 10% OFF
sandpaper.ca/
Designer Epoxy
designerepoxy.ca/
Instagram
/ spraguewoodturning
Facebook
/ spraguewoodturning
Website
www.spraguewoodturning.ca/
Email
spraguewoodturning@gmail.com
If you want to send something me, send it to:
Sprague Woodturning
652 Rantz Rd
Petawawa, ON Canada
K8H 2W8
This video is for entertainment purposes, please read and follow all safety precautions with all your equipment!
American Amazon Subscribers use links below
Electrical parts used to make the nightlight
LED lights
amzn.to/37K0bcO
Switch
amzn.to/3heIC81
9 Volt battery connectors
amzn.to/2M7Uj4X
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/34EdCJP
Timber check moisture meter
amzn.to/2Jn0XTt
Scotch Brite Hand Pads
amzn.to/34Foffq
Wood Bowl Finish
amzn.to/3mBT1Mj
0000 Steel wool
amzn.to/3e8lcQa
Soapstone carving blocks
amzn.to/37TYief
Pen I use, Pilot V5 0.5mm tip, Black
amzn.to/3mGBRgv
¾” spindle roughing gouge
amzn.to/3eeycUu
UC Coatings End Grain Sealer
amzn.to/3eb9jJ3
Easy Wood Tools Full Size Finisher
amzn.to/2HO8Ssx
Pressure Pot for Casting by California Air Tools
amzn.to/31Xm0T2
Canadian Amazon Subscribers use links below
Crown Pro Turning Parting Tool
amzn.to/3mCIEIo
Wood Bowl Finish
amzn.to/34DZ1Ox
0000 Steel wool
amzn.to/3jBfEyI
Soapstone carving blocks
amzn.to/3kJPX03
Pen I use, Pilot V5 0.5mm tip, Black (you can select the quantity when you get there)
amzn.to/3kUtU6U
Easy Wood Tools Full Size Finisher
amzn.to/3myOAC0
Pressure Pot for Casting by California Air Tools
amzn.to/2TCY9n5
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/3oINYvF
Timber check moisture meter
amzn.to/34GJs8V
Scotch Brite Hand Pads
amzn.to/2TFnqNy
As an Amazon Associate, I earn a small commission from qualifying purchases. By purchasing from the links above, you are supporting this channel so I can bring great content every week! Thanks!
Ellsworth Signature Bowl Gouge
www.leevalley.com/en-ca/shop/...
Typhoon Carving Burrs
www.leevalley.com/en-ca/shop/...
Sculpture Supply Carving Stones
www.sculpturesupply.com/list....
Sculpture Supply Lead Free Pewter
www.sculpturesupply.com/detai...
Oneway Manufacturing Easy Coring System
oneway.ca/index.php?route=pro...
Saltmill Mechanisms
woodchuckers.com/products/cs-...
Peppermill Mechanisms
woodchuckers.com/products/che...
R&D Bandsaw Blades
tufftooth.com/product-categor...
Oneway Vacuum Chucking System
oneway.ca/products-category/c...
Combination Skew Chisel and Gouge
www.leevalley.com/en-ca/shop/...

Пікірлер: 723

@kcglide Жыл бұрын

I didn't realize that working with epoxy was as time consuming as it is. You are right. I have three times the effort in a wood and resin bowl. But, it is a piece of art and for me, turning is a hobby. That is a great looking bowl and you gave me a few good ideas.

@SpragueWoodturning Жыл бұрын

Thank you!

@TheParkAttendant 2 жыл бұрын

Even mistakes can be beautiful serendipity. It still turned out gorgeous. Would that my mistakes would turn out that gorgeous.

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@KrackinKarl 2 жыл бұрын

With all the cuts and then more pours, you got what looks like a layered root system or veins! It's beautiful!

@SpragueWoodturning 2 жыл бұрын

Veins, totally! Thanks 😊

@jennysherrill7216 10 ай бұрын

I'm catching up on old videos -- wow, this is crazy cool!

@SpragueWoodturning 10 ай бұрын

Thank you very much!

@laurencehastings7473 9 ай бұрын

The bowl form is perfect for this design.

@SpragueWoodturning 9 ай бұрын

Thank you so much!

@jeanettenorman7052 Жыл бұрын

I love the square 90 degree angle for the bowl edges. Really suits the over all funkiness of this work. Thanks

@SpragueWoodturning Жыл бұрын

Thanks for watching

@sounds.like.onomatopoeia 2 жыл бұрын

Just watched this again after months. Would love to see this again, maybe even with less colors.

@SpragueWoodturning 2 жыл бұрын

Without casting directly in the pressure pot 🤯🤪🤯🤪

@leliaguinn5307 9 ай бұрын

The bowl is amazing. It is good to seee that you also make "mistakes" when pouring. The colors work well together and it really like the black ring around the bowl. It brinss it all together

@SpragueWoodturning 9 ай бұрын

Thank you very much!

@christiansfortruth5953 20 күн бұрын

Brilliant. The depth effect adds mystery. It grabs your attention and you stare working out how in the heck it was done. Thats if your not a turner. 😊😊😊😊

@SpragueWoodturning 20 күн бұрын

Thank you very much!

@alexgray159 3 жыл бұрын

Oh man, I feel for you. There is no worse feeling than having a part not release initially. For context, when we do tool prep in the aerospace world we have to get the part surfaces absolutely squeaky clean and then polished and then cleaned again. We don't take them to a mirror finish, but they are headed that way. All to deny the epoxy any chance of getting any kind of mechanical bond to the metal. Then the release agent (or agents) go on, usually two coats for a tool that is already coated, more like six for a new tool. I am so glad you didn't have to sacrifice the pressure pot. Also, hot damn those things look amazing. Beautiful work as always.

@SpragueWoodturning 3 жыл бұрын

I’m still a little shocked how the resin bonded to the paint so well, it was like I never sprayed the pot at all with the release agent! Thanks 🙏

@alexgray159 3 жыл бұрын

@@SpragueWoodturning If I had to guess, I think that paint saved your butt. If the epoxy had gotten ahold of the steel you could have hit that thing with a train and it wouldn't have popped. Wish I had some pictures of times where release agent has either fully or partially failed during an autoclave cure, an ~1/8 inch carbon fiber laminate will take a 1/4 inch steel plate and bend it like a Pringle.

@jerryrudolph6603 2 жыл бұрын

When you first started I thought this is not going to be good. When finished I love it. Great job.

@SpragueWoodturning 2 жыл бұрын

It’s a very unique piece. Thanks

@emasolie4135 2 жыл бұрын

Truly different than anything I've seen. Beautiful.

@SpragueWoodturning 2 жыл бұрын

Awesome! Thanks 😊

@razmatazmania1 2 жыл бұрын

I am sure that there are people out there that will like the colors of the bowls but they are not my cup of tea. You did a lot of work and I'm sure there are people who will buy them. Not to worry tho..we all know that you can't please everyone all the time. I hope you have a wonderful Easter.. Please stay safe and keep on turning.

@SpragueWoodturning 2 жыл бұрын

It’s very busy and not for all. Thanks and happy Easter to you too.

@strippins Ай бұрын

It’s beautiful, but I don’t wonder if one colour would have been better

@greenmanjnj Жыл бұрын

Wow, I love this!! Yes, Yes, YES!!

@SpragueWoodturning Жыл бұрын

Thanks 😊

@theresagosling1530 3 жыл бұрын

The little bowl is too cute!

@SpragueWoodturning 3 жыл бұрын

Thanks 😊

@shell91 Жыл бұрын

Love this bowl, especially how the staining makes the yellow look greenish in places and gives the whole piece an almost drawn in look. Very artistic.

@SpragueWoodturning Жыл бұрын

Thank you very much!

@lakeshorewoodturner5136 3 жыл бұрын

They turned out awesome Jim great choice of colors. I screamed no at my tablet my wife jumped and wanted to know what my problem was. LOL!!!

@SpragueWoodturning 3 жыл бұрын

I’m sure you weren’t alone, lol. Thanks!

@mjrulez100 2 жыл бұрын

Absolutely beautiful. I'm glad you managed to get it out of the pressure pot.

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@deidremcintosh6892 2 жыл бұрын

Incredible Gorgeous Beautiful

@SpragueWoodturning 2 жыл бұрын

Thanks!

@lorrainedubois4635 3 жыл бұрын

Your puzzle bowls are BEAUTIFUL 😍 VERY UNIQUE AND UNUSUAL an I LOVE THEM 💘 ❤ 😍

@SpragueWoodturning 3 жыл бұрын

Huge amount of work, thanks 🙏

@ilovelar 3 жыл бұрын

That's gorgeous!!! And thank you so much for having the courage to share your mistake. SO many people will learn from it!

@SpragueWoodturning 3 жыл бұрын

If you stick around you might see me make lots, haha. Thanks.

@oldmanwoodcraft 3 жыл бұрын

Wow they look amazing ,very clever technique with the spacer . i will be honest , both of them look good but the small bowl looks wicked wow . thanks for mentioning me and my channel .Cheers Ahron

@SpragueWoodturning 3 жыл бұрын

I’m with you the smaller bowl has more resin in it making it flashier. Your a talented man, thanks for the inspiration and my your channel grow!! Jim.

@Oxyte 2 жыл бұрын

Audible chuckle in the middle there! 🤣 Bless ya.

@SpragueWoodturning 2 жыл бұрын

Yup, dumb move, never again, lol. Thanks

@denxero Жыл бұрын

This "resin staining" you mention indeed makes it look even better.

@SpragueWoodturning Жыл бұрын

Agreed, thanks!

@MonicaKehlet 5 ай бұрын

They turned out beautiful

@SpragueWoodturning 5 ай бұрын

Thanks so much!

@philgallagher1 9 ай бұрын

Jim, I've been going through your back catalogue in a fairly random fashion (I must've watched 30 or so!) & I have to say this is by far my favourite! If I ever found myself in a postion to afford to commission a bowl set from you, this is EXACTLY the style I'd go for! We would need to talk about colours though!! 😀

@SpragueWoodturning 9 ай бұрын

Thank you very much!

@drewber565 Жыл бұрын

"Where's your drill instructor, son?" "Blowed up, sir!!" All other Soldiers, in unison, "BLOWED UP, SIR!" LOL!!

@SpragueWoodturning Жыл бұрын

Lol, thanks!

@diedredunham7383 Жыл бұрын

This time you went way out of your usual way of doing bowls. I really like them. I was one that was thinking doing it in the pressure pot was so very wrong!! I'm glad it worked out and you got it out!!

@SpragueWoodturning Жыл бұрын

Thank you very much

@scottandkylie6386 3 жыл бұрын

I've watched several of your videos, but this one finally made me subscribe. Amazing job! I'm willing to bet that when the blank wouldn't come out of the pot you were thinking, "I wish I hadn't oughta done that." When all else fails, use a bigger hammer.

@SpragueWoodturning 3 жыл бұрын

Welcome aboard! As a former military mechanic, those were words we lived by, get a bigger hammer!

@iskoglan 3 жыл бұрын

Love the little one.

@SpragueWoodturning 3 жыл бұрын

It sure is colorful, thanks

@scottmoomaw6072 3 жыл бұрын

Thanks for.showing the pain and agony as well as the successes I watch these to see what to do as well as what not to do. You are an inspiration to all of us that love turning.

@SpragueWoodturning 3 жыл бұрын

I certainly show what not to do sometimes, lol. Thanks.

@judithfairchild8620 3 жыл бұрын

It's pretty in colors and wood. The bottom looks like a close up of a city map with a river and canals. I would buy it.

@SpragueWoodturning 3 жыл бұрын

Thanks! This sold quite some time ago to an American collector.

@michellesutton202 9 ай бұрын

This is so visually interesting, with the pattern and colors. Love it, great job. I like the slight staining fron the resin on the wood, it ties the black band together. Just spectacular 🎉

@SpragueWoodturning 9 ай бұрын

Thank you very much!

@charliemckay6402 3 жыл бұрын

Fantastic sci-fi look. Mould release is used on moulds with relief angles that are not any deeper than they have to be. I have never tried this, but it seems like a good way to keep things from floating in the pressure pot is to put a piece of plywood wrapped in cellophane tape with a piece of 2by4 attached which has been cut to length such that when the pressure pot lid is screwed down only a minimal clearance is left between the 2by4 and the inside of the lid. The 2by4 could be made in two pieces that allow length adjustment.

@SpragueWoodturning 3 жыл бұрын

I’ve heard of this method, thanks for the info. Jim.

@valeriehenschel1590 3 жыл бұрын

Glad you did not have to destroy the pot to get the blank out. When you poured directly into the pot, I knew you would take a lot of effort to get it back out. But you managed to get it out without destroying either the blank or the pot. That extra resin soaked into the open pores that walnut has. Maybe maple would be a better choice next time (harder, denser). Definitely entertaining to watch you create the two bowls.

@SpragueWoodturning 3 жыл бұрын

Thanks Valerie, yup, I won’t do that again!

@Buttermilk3696 3 жыл бұрын

Wow!! What salad bowls!! Strips of red and green bell pepper mixed among the lettuce would match the colors perfectly! Hmm,,,,,I think I’ll have a rasberry balsam vinegarette dressing with this salad please. Very innovative although I think I see more gray in the whiskers after this episode.😤🤣😂🤠 Very well done!!!

@SpragueWoodturning 3 жыл бұрын

Grayer and balder, haha. Your making me hungry, lol. Thanks 🙏

@suesmith9202 3 жыл бұрын

Absolutely bloody beautiful.

@SpragueWoodturning 3 жыл бұрын

Thanks Sue!

@royholley840 2 жыл бұрын

Agree Jim, very cool!

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏🏻

@janicek2860 3 жыл бұрын

Very different. I know a lot of comments about people liking it but I’m not a fan of the modern look, but that’s just me. I think the red was too wide and red is my favorite. I can’t believe you poured the resin in the pot LOL. You are one of my favorite turners. Stay safe and keep warm. God bless 👍

@alexgray159 3 жыл бұрын

I love the colors, as you say personal taste, but I think if this was done again with earth tone type colors you would end up with something that looked like a rock with loads of intrusions pushed through through it, which would be a touch more subdued and also beautiful. And the resin pushing into the wood would look fantastic with those colors as well.

@SpragueWoodturning 3 жыл бұрын

I agree Alex, if I were to do it again I would take out the black and put a more flashy colors to make it really pop, thanks!

@SpragueWoodturning 3 жыл бұрын

I get it Janice, I knew it was t going to be for everybody, lol. I can’t believe I did it either, hahah. Thanks

@jacquiemouton9053 3 жыл бұрын

Those bowls are exceptional. Very different to what you usually do but I think it was totally worth it. Absolutely beautiful.

@SpragueWoodturning 3 жыл бұрын

Thanks Jacquie!

@rogerjohnston9545 2 жыл бұрын

I’m impressed again. 👍

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@marycatherinelebouef-op4hf Жыл бұрын

You had me rolling on the floors, laughing like a fool when you weren’t able to get the bowl out of the pressure pot! This turned out to be sooooo cool and I love that they are a set! The colors are fantastic together! Beautiful piece! Great job! Bravo!

@SpragueWoodturning Жыл бұрын

Glad you enjoyed it! Lol

@yvonnehughes3036 2 жыл бұрын

This is crazy!! looks great. I'm glad you didn't have to ruin your pressure pot

@SpragueWoodturning 2 жыл бұрын

Me too! Thanks

@georgepauselli769 3 жыл бұрын

Fantastic, resin into the pot ho no not turned out ok lucky , brilliant pieces lovely colours stay safe

@SpragueWoodturning 3 жыл бұрын

I guess it could of been worse, thanks.

@billy19461 3 жыл бұрын

I think that it was a lot of work, time and money but worth it all. Beautiful bowls!

@SpragueWoodturning 3 жыл бұрын

It’s a one of a kind, that’s for sure! Thanks.

@kathharper 3 жыл бұрын

Great result after that frustrating pressure pot boondoggle... I cringed when I realized what you planned to do ... very glad you finally got the piece out of there!

@SpragueWoodturning 3 жыл бұрын

Yup, that was dumb!! Thanks

@CharlotteBethany54 2 жыл бұрын

1. I like your rock. 2. The pain! Oh the pain of casting in the pot. 😆 🤣 😂 it was horrible I felt that. And then...wallah! You persevere and again, make magic happen.

@SpragueWoodturning 2 жыл бұрын

#2 stupid! 🤦🏻🤦🏻 won’t do that again, lol. Thanks!

@user-fp9rq9ed6q 6 ай бұрын

I am fairly new to this channel. I can say that, so far, I have never seen you take on a more complicated project. I don’t know how you can imagine what it will look like when you are done. It was also very entertaining. Putting it out in the snow, putting it upside down on props - it was amusing what all you went through to get it loose. One of my favourite parts in your videos is watching you struggle to get it out of the mold. I also like seeing you covered in epoxy shavings. This was a huge project and I really enjoyed this video. Beautiful pieces once again. It was well worth the extra time you put into it.

@SpragueWoodturning 6 ай бұрын

😂 Thanks so much! Happy you enjoyed it!

@timbutler3733 2 жыл бұрын

OMG. Bowls are beautiful. Good job.

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@cydnicaldwell1337 3 жыл бұрын

They're absolutely amazing! Gorgeous and the colors just pop. It looks like a multiple lightning strikes have hit the wood and the newest is that gorgeous red. Just a beautiful 2 piece set.

@SpragueWoodturning 3 жыл бұрын

I’m glad I went with the red last, it’s my favorite in this piece! Thanks.

@barbannco 2 жыл бұрын

gorgeous pieces

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@bradedwards916 3 жыл бұрын

They turned out way better than my initial thoughts, way cool, you have way more patience than I do! Great job! Oh and you can keep your snow and cold weather, thanks you very much!

@SpragueWoodturning 3 жыл бұрын

Awwwwe, I’m ready to share, haha. Thanks.

@ssue4q 3 жыл бұрын

You said in the beginning might be too busy for some .. well not for me! These are absolutely beautiful! Wait that word does not fit got to replace it with stunning!!! I love wood and colored resin it's the only way to go in my opinion!

@SpragueWoodturning 3 жыл бұрын

Your right, it’s a work of art! Thanks 🙏

@sharoncrossman8212 3 жыл бұрын

love, love, love it.

@SpragueWoodturning 3 жыл бұрын

Thanks 😊

@evaroby9335 2 жыл бұрын

This is so cool, watching the unfolding!!!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@mariagaddis5134 3 жыл бұрын

Jim that bowl is absolutely gorgeous it may have taken a little bit longer but the end results is worth it.

@SpragueWoodturning 3 жыл бұрын

Thanks Maria!

@hansolavpedersen5521 2 жыл бұрын

Fantasyic bowl you made there. And lots of people learned plenty of it to, many to do and not to do. Great work Jim. Thank you.

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@stanmerrell5390 2 жыл бұрын

Looks amazing. Thanks Jim.

@SpragueWoodturning 2 жыл бұрын

Thanks for watching!

@petenelson7273 3 жыл бұрын

Amazing bowls. Great idea

@SpragueWoodturning 3 жыл бұрын

Thanks Pete!

@gregsocks675 3 жыл бұрын

Gorgeous!

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@immortalfae13 2 жыл бұрын

Wow! That is really beautiful. The possibilities are endless aren't they? Keep killin' it man! Take care & God Bless!!!

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@lauramature7388 2 жыл бұрын

Wow turn out wonderful!!!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@margaretcarter741 3 жыл бұрын

Absolutely awesome!

@SpragueWoodturning 3 жыл бұрын

Thanks 😊

@kcglide Жыл бұрын

You made it to look like your jacket. Y'all match.

@SpragueWoodturning Жыл бұрын

Guilty, lol. Thanks

@user-nx8gk1le2m Жыл бұрын

That's so cool, I would definitely put that on my table, I love it

@SpragueWoodturning Жыл бұрын

Thank you so much!

@joandow5627 2 жыл бұрын

Stunning work!!!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@jamessparks4584 Жыл бұрын

Turned out great looking

@SpragueWoodturning Жыл бұрын

Thanks!

@kennygersin5406 Жыл бұрын

The bowls came out really great even though you had a few problems and your color choices in my opinion is spot on, great outcome as usual sir 😀

@SpragueWoodturning Жыл бұрын

Thank you very much!

@Steven_nevetS 2 жыл бұрын

Just fantastic!

@SpragueWoodturning 2 жыл бұрын

Thanks!

@TheKlondikeCraftsman 3 жыл бұрын

Wow that was some work. Nice pieces!

@SpragueWoodturning 3 жыл бұрын

Besides the pressure pot, it was fun, lol.

@thinklikeadog007 3 жыл бұрын

The best experiments are a challenge and teach unexpected lessons! Funky Cool, I like it

@SpragueWoodturning 3 жыл бұрын

Words to live by, thanks!

@AnneBerwick 2 күн бұрын

This bowl is absolutely beautiful 😍😍 ❤️ ❤️ 🎉🎉

@SpragueWoodturning 2 күн бұрын

Thank you very much!

@mikeperritte 2 жыл бұрын

Awesome looking bowls.

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@esthermiranda8815 Жыл бұрын

Love this design...actually all Ur artworks ...am addicted to watch Ur vlogs during my free time...more power Jim....MABUHAY!!! from philippines!

@SpragueWoodturning Жыл бұрын

Thanks for watching!

@leisongivangomo5656 3 жыл бұрын

Jim! This is one of your best videos and best outcomes to date on your resin journey 💫🎉💕🎊 Dont worry about it being long, it was thoroughly entertaining! Even if you did, uhhh, 🥺 screw up with the pressure pot! Thank you for sharing that part of your journey as well 😆 I absolutely LOVE this project! I like how the resin worked with you to create that third dimensional impact by bleeding into the wood. Amazing colour combo!

@SpragueWoodturning 3 жыл бұрын

It was a really cool effect and I’m not sure if I will ever do one again, one of the goals of my channel it to teach others what not to do, hahaha. Thanks K

@Lori_M 3 жыл бұрын

I love love love love love this piece. Stunning!!!!

@SpragueWoodturning 3 жыл бұрын

Thanks Lori!

@connieprice7017 Жыл бұрын

Awe so beautiful. Amazing work. Thank you for sharing.

@SpragueWoodturning Жыл бұрын

Thanks for watching!

@susanholiday7347 Жыл бұрын

That's simply awesome 👍

@SpragueWoodturning Жыл бұрын

Thanks 👍

@davidhenry7585 3 жыл бұрын

Beautiful bowls. The colors compliment each other well.

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏🏻

@elisecoxhell4139 Жыл бұрын

I love this look! I'm not personally a fan of this specific colour combo, but I would love to see this technique used with your Peacock colours! It would be great fun to see you exploring this technique in different ways should you wish to in the future. I think it would be interesting to see how more "precise" geometric cuts mapped out with a compass or something would look compared to the more relaxed freehand lines, though I don't know if that would look too rigid with this style. Maybe a piece of wood with a really defined knot or 2 to base the cuts around would be a fun project to experiment with! As always, stunning work 💜

@SpragueWoodturning Жыл бұрын

I will give it some thought. Thanks

@jeremyloveless1906 3 жыл бұрын

Beautiful

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@victoriamontes3213 3 жыл бұрын

Love the bowls! The colors are amazing!

@SpragueWoodturning 3 жыл бұрын

Very vivid, thanks!

@carolewarner101 3 жыл бұрын

WOW!!! Those bowls are stunning! REALLY cool and love the gloss finish on them. They're both works of art!

@SpragueWoodturning 3 жыл бұрын

Thanks Carole!

@mikeyoung8126 3 жыл бұрын

Very unique and beautiful

@SpragueWoodturning 3 жыл бұрын

Thanks Mike!

@judierickson7166 Жыл бұрын

Phew! That was worth all the work!

@SpragueWoodturning Жыл бұрын

Yes, thanks 😊

@theresagosling1530 3 жыл бұрын

Great work!!!! Love it!

@SpragueWoodturning 3 жыл бұрын

Thanks again!

@joeray6726 Жыл бұрын

Fantastic!

@SpragueWoodturning Жыл бұрын

Many thanks!

@thevideogameempire Жыл бұрын

It looks kind of like there's alien vines growing over the wood. I like it.

@SpragueWoodturning Жыл бұрын

Agreed, thanks!

@michaelsalman4349 2 жыл бұрын

Definitely worth the time , it looks brilliant. - Michael S from Australia.

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@carolgutierrez7961 3 жыл бұрын

Love the end product! Thanks for sharing your experiences with us!

@SpragueWoodturning 3 жыл бұрын

Thanks 😊

@davidboucher1329 3 жыл бұрын

Awesome job!

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏🏻

@leahcushman5290 3 жыл бұрын

Fascinating to watch the process, love the results!

@SpragueWoodturning 3 жыл бұрын

It pretty neat! Thanks

@janeplatt8254 Жыл бұрын

Love the colours great choice Jim❤

@SpragueWoodturning Жыл бұрын

Thank you! Cheers!

@lawrencemcnamara4321 3 жыл бұрын

Very nice great colors

@SpragueWoodturning 3 жыл бұрын

Thanks, cool eh?

@juanitakimbel7125 3 жыл бұрын

Entropy resin with a slow hardener from Composit Canada (Close to the Toronto airport), you can do a deep pour without a pressure pot. Works really well with no air bubbles. Only problem is the 3 days to harden. Love the bowls!

@SpragueWoodturning 3 жыл бұрын

I’m totally happy with this resin, can’t imagine using anything else. Thanks for the info!

@ursulamartawilkinson5346 5 ай бұрын

Love watching all you make

@SpragueWoodturning 5 ай бұрын

Thank you very much!

@TopRPDRvideos 3 жыл бұрын

Nice idea, I prefer more classic styles but why not, it's nice to try new things! If you need to keep the pieces spaced evenly, maybe you should just go the extra mile to glue them on a base before pouring the epoxy. Also, glad to see your opinions on mistakes and possible routes, always entertaining AND educational. Keep growing!

@SpragueWoodturning 3 жыл бұрын

Thanks, I’m always learning and yes I should of used hot glue on the one pour, Jim.