Sounds great buddy. Do you make any video’s?

@@JackMackWoodturning No, I am very unconventional in my methods...it would take me longer to edit the video than to make the project...besides, so many can do it easier or faster than me, I just take my time and if I have to take the long way around the barn to get it done, then so be it. I take pics of the finished items to show people and if they are interested, I make it for them.

Nice one Joe. Glad you enjoyed it. I reckon you will like my latest vid. kzfaq.info/get/bejne/b6lgpMKHscDWmJc.html

Nice one Will. You made it back to Scotland yet?

What beautiful Work you do. I love to watch you work. Best stool I've seen. Very artistic woodworker, thanks for video.

Thanks HB. It’s not bad. I have it in my workshop. I think you might like my new vid. kzfaq.info/get/bejne/b6lgpMKHscDWmJc.html 😊👍🏻

Nice one GSD. Much appreciated my friend 👍🏻😊

Thanks D, do you do any woodturning?

Sorry I can’t translate this

Thank you. I’m glad you enjoy my work

Ñ

Þ⁷

Э1ээ1ээ1ээ1эээ3эээ1ээ1ээ1э1э1э1э13э1ээ1эээээээ1эээ13эээээ135ээ1э15щээээээ1ээ1эээээ1э121эээ3эээ132эээ1ээ13э2ээ1ээ1эээ13ээ1ээ1эээээ1эээээЭээээ1э1эээ1ээээ1ээээээ1э1ээ1ээ1э3эээээээ3ээ1эээээ15ээ1ээ2ээээ4эээ3ээ4эээ1ээээээээээээ123ээ1эээээээгээээ3эээээ1эээ3эээээ1эээээээ6э4ээ2ээээ1эээээээээээээээээ3э4гэээ1эээээ1ээ3эээээээээээ16эээээ5эээээ1эгэээЭэээээ1э1эээ1эээнэнэээээээээээээээээээээээ1эээээгФэээ1эээуээ1Ээгэээээээээээ6ээээй3ээээ1ээ1эээээээ1эээ1ээФэээээээээйэээээ1ээ1эээээээээээээ3эээ1эээээ5эээ1эээ3эээээээ5эээ3ээээээээ3эээ1э1эээээЭээээ1ээээээээ1эээ56эээ1э1э3ээээээ3ээээээ1ээээээээээээээээээээээээээээээээ6Ээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээ1эээээээээ5ээээээщэгээ6эщэээээээээээээээ1эээээээээээээээээээээээээээээээээээээээээээээээээээээээээгэээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээжэээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээээ÷э энд ÷÷ээээ÷э÷эээээээ÷ээ÷÷эээээ÷ээ÷÷э эдак э÷э÷÷эээ÷э÷ээээээээээ÷÷эээээээ÷э÷÷ээээ÷э÷ээ÷÷эээээээ÷ээээ÷ээ÷ээ÷ээ÷÷ээ÷ээ÷э÷э÷ээээээээ÷эээээ÷÷÷эээээээээээ÷эээээ÷эээ÷эээээ÷эфФ÷ЭЭЭ÷ЭЭЭЭЭЭЭ÷Э÷ЭЭЭЭ÷ЭЭЭЭЭЭЭЭЭЭЭ÷ЭЭЭЭЭЭ÷÷ЭЭЭ÷Э÷÷ЭЭЭЭ÷ЭЭ÷ЭЭ1÷÷ээээ÷ээээ÷ээ÷ээ

Se

No sweat J. Thanks for watching 😊👍🏻

I do wish ply was cheap.. this stuff is +£300 per sheet

@@JackMackWoodturning Maybe it's a regional thing. Here in the US, there are a lot more trees, so it would make sense for wood to be cheaper. Don't quote me on that; it's just a guess. The economic variances of the world lumber industry is not exactly my area of expertise.

This birch ply is made in north Russia.. as far as I know it is not manufactured in Canada which would be the only other place you’d fine birch forest. I hear from my friends In The us that ply has more than doubled in price in the last few months.. it’s almost doubled in price here in the uk.

@@JackMackWoodturning Economics is a very complicated field. I suppose I should correct myself and say that it WAS a cheap material once.

I don’t think you need to correct your self. What you said was accurate.. “people think” .. as I said, I wish it was. 😉👍🏻

Thanks S. Much appreciated 👍🏻😊

Thanks Randal, much appreciated buddy, 😊👍🏻

Nice one DG. Thanks for watching 😊👍🏻

Thanks T. Much appreciated. You know any good museums?

@@JackMackWoodturning Afraid nothing in Eastern WA comes to mind -I'll try to research a bit and will forward if I find something.

Thanks bud.. So do we now think I can’t top this one ??

@@JackMackWoodturning You will. That's what makes it so fun.

No pressure then

😆

Hope that means you enjoyed it T. Thanks for watching 👍🏻😊

@@JackMackWoodturning I did! I guess over the top can mean bad in another context.

Nice one J. Thanks for watching 😊👍🏻

Sorry I have no way of translating this

No problem. Thanks for watching 😊👍🏻

Thanks for watching

Sooooooo many people before me 😉

Thanks M. Where are you watching from?

Thanks buddy. I’m currently working on my best ply wood one yet . Video should be out soon. 👍🏻

@@JackMackWoodturning I look forward to watching you do that as do some of my work colleagues who watch your vids with me on my mobile. I'll stick to scratching on my violin while trying not to make it sound like my cat with its tail caught in your lathe. :)

Thank you.. I’m glad you and your work mates enjoy my videos.. do you play professionally?? I’m partial to some nice classical music in my AirPods while I work..

@@JackMackWoodturning Sorry no, not at all and never. I'm teaching myself how to play using books and KZfaq vids. I paid for a few dozen lessons to get me started. I play stuff for my wife as she likes to listen but its mainly for my own enjoyment. Many, many hours alone practicing, sounds sad but I enjoy it. If you want to listen to a true master then I'd suggest Patrick Contreras. Bud, you have a real gift. I've watched lots of your vids and it seems you have a vision, you can see the finished product before you start. I also think you're left handed? In my experience, as a left handed engineer, left handed people are 50/50 in engineering roles and I've found thats also true in the creative section too.

Thanks man. That is an interesting fact. Violin is the hardest of all instruments to master. I admire your dedication. 😊👍🏻

No sweat P. Thanks for watching 😊👍🏻

It doesn’t take that long really. Worth the effort! 👍🏻😊

I didn’t know plywood was referred to as multiplex.. that’s got to be an American brand right ?

@@JackMackWoodturning I thought it was an international term, but it might be just a german thing, here we call veneer plywood made from very thin layers that is more than 12mm thick and has more than 5 layers multiplex, I guess just to differentiate it from other kinds of plywood... just plywood is a very broad term after all

Cheers bill. Have you turned birch ply before?

No only cabinet grade oak and it had some voids in it I tried a small glue up of fiber core it finished well but looked strange

Thanks Amanda. Much appreciated 😊😉👍🏻

Thanks TR. Much appreciated. What is your pic?

@@JackMackWoodturning I damn with faint praise. :) Pic is a doodle from a million years ago of a scuba diver encountering something they didn't expect.

No probs man. You going to give it a shot?

Thanks L. Much appreciated. I’m sitting on it as we speak. Have you seen ply used like this before?

@@JackMackWoodturning my first time bro

More than one way to skin a cat Mike haha 😊👍🏻 But… I did use a table saw … hmmm

Thanks M. Much appreciated 👍🏻👏

Nice one man! Great you get it for free. Always feels good turning someones waste into something useful 😊👍🏻

I'd love to see pics of your table tops!

Me too

I’m glad you are not asking me that 😆

Thanks B. New video every Friday lunchtime buddy 👍🏻😊

Primer ??

Well I certainly won’t. I am sitting on it now plotting world domination 😂

Thanks soph 😉

Thank you. Would you have it in your home

Yes sir

Nice one A. Much appreciated 😊👍🏻

Glad you enjoyed it it sue. Would you use this piece in your home.

Definitely!

Thanks man. Much appreciated 😊👍🏻

Thanks 😉

No problem John. Thanks for watching buddy 😊👍🏻

Thanks for the kind words.would you not use it as a stool ?

Much appreciated B 👍🏻😊

It may be for sale on my website next week 👍🏻😊

Thanks. Have you done any wood urning

Thank you. Would you have this in your home ?

@@JackMackWoodturning absolutely!!

Thanks a lot buddy. I’m glad you enjoyed it 😊👌🏻👍🏻

Which guy? 🤣

Thank you. Would you use it in your home ?

Thanks for the sub Michael. Glad you enjoyed it 😊👍🏻

Did you enjoy it Charles ?

@@JackMackWoodturning yessir 👌🏻

🙏

Top 👍👍

Sounds like he was quite a guy. Did he pass on his skills?

Thanks David.. aye I love that mallet,, perfect for a heavy th’whack! Have you made your own mallet ?

@@JackMackWoodturning ha.. Im just a business guy Jack. I don't have great skill like you man. I just enjoy your work!

I knew that mallet had to be homemade! I love it!!

Here’s the video of me making said mallet 👍🏻

kzfaq.info/get/bejne/ga6BZsKDstPDh58.html

You can still sit on them tho.. and bash them around.. they like it rough. Lots of work yes, but they last forever

Hey. The lay out of the stretchers is purely aesthetic, If you’d like to make items like this the only piece of advice I would give you is to watch ALL of Curtis Buchanan KZfaq channel. He is outstanding and he explains all you’ll ever need to know about chair making.

@@JackMackWoodturning Thank you. I took your advice and checked out his channel. Helpful.

😊👍🏻

😊👍🏻

​

The recess was made to hold the piece to the chuck. I filled it to remove any sharp edges and add durability 😊👍🏻

😊👍

. .就

Thanks Will. Yeah it is a handy function 😊👍🏻

You like ?

Thank you Brenda Did you like the finished piece ?

Yes I did. It was a lot of work but turned out beautiful.

Hey Felicia. Please don’t worry about asking questions, that’s what I’m here for and I’m more than happy to help and share my experience. That process is called burnishing. It can be done with wood shavings or with extra fine wire wood. It’s function is to add a final sheen to the wood after sanding. It goes back to days of bodgers making chair parts in the woods (but most likely way further back to the birth of turning) before we had extra fine grit sandpapers and other abrasives it was used straight after final cuts and softens the effects of burnishing caused by tool bevels. I personally find it adds a shine that looks more natural than sanding a piece to 1200 grit or higher. Hope that helps and please don’t hesitate to comment questions on any on my videos. How long have you been woodworking for and what do you like to make ?

Thanks man 😊👍🏻

Yeah it’s walnut. Thanks Lee. Glad you enjoyed it man 😊👍🏻

Cheers Bruce. Would you have it in your home ?

Thanks for watching 😊👍🏻

Thanks Roberta. Much appreciated 😊👍🏻👌🏻

It’s not hard. But I know what your saying. It takes a lot of practice. 👍🏻

@@JackMackWoodturning indeed, that's true for most things in this life.☺️

Shellac sealer then Danish oil 😊👍🏻

Thanks A. Glad you enjoyed it 👍🏻🙏😊

😆😆😆… I talk to all my machines, but that one especially

Nice one RL. Glad you enjoyed it 😊👍🏻

The recess provided a hold for the chuck. I filled it more to remove any sharp edges but it does add a little strength as well 👍🏻😊

@@JackMackWoodturning I too was wondering what was its point. I thought that you might inlay your signature/logo on it or something.🤔

It’s covering the recess that was there to hold the top on the chuck.

х

You like it ?

@@JackMackWoodturning YES, It's fantastic!!!

Do you do any carving ?

This technique is called burnishing. It is a finishing technique 👍🏻😊

Iv’e been doing this nearly 20 years and still have all my digits 😊

When specifically are you concerned? Is it when he's working on the legs and is "holding" the wood as it turns? I'm very inexperienced with wood working...my paternal grandfather passed away before he could teach me much. My dad has passion for it, but not nearly the skill grandpa had.

The dude doesn’t know what he’s talking about Fil.. I’m a professional experienced woodturner and I also used to teach woodturning.

As a devotee of the violin all these tools are scary

@@shelleyoxenhorn833 the only time you should be scared of the tools you work with is when you disrespect them because that's when they will bite you

Thank you. I made this one for myself and use it every day. I love it 😊