Too baeutiful. This is the first woodturning video where I was so scared that you might hurt your fingers during the cut. That was scary as hell

Beautiful! I hope all the wood chips get incorporated into something in the future instead of just being scrap.

I’m amazed he still has all his fingers.

Your pieces are absolutely stunning, and it is clear that it takes incredible artistic vision to do the work you do... However, the amount of wood wastage bothers me; do you ever collect the shavings and cast them in epoxy to make more pieces?

This guy sure likes living dangerously with his thumb.

I think the finished product is absolutely amazing! Just it in its self is a complete work of art. I believe it is so beautiful and unique that it should have a name. Thank you for sharing your artistry!

At secondary school in the mid 1960's my friend clued several pieces of different woods together and turned out a beautiful bowl. Either by luck of fluke it was sensational and the talk of the school for a while.

ماشاء الله تبارك الرحمن تسلم ايدك عمل فني جميل تحياتي لك من فلسطين

Another great example on how NOT to operate power tools. But what he creates is amazing.

Please make your beautiful work also practical by hollowing out the inside.

Pretty but not hollow!

What's being done by this artist is really amazing. Something....each of us should notice....we should not lose sight of how large the initial piece was. It was HUGE! Now compare the before and the after pictures of this item. What would have kept the artist from using a smaller initial build to end up with the same basic result. Why should you begin with something so large...when you basically end up carving most of off during turning.

Such a lot of work, but oh, such a great result!

the way he cut and planed the timber is against all health and Safety standards! Besides what he doe in that way the end product is superb!

Stunning piece of wood art.

What is it ? Simply a piece of art, I suppose. Very nicely done. 👍

thanks you for sharing your amazing work!

Thank you for sharing your amazing work. True artistry!

Beautiful piece! Would be nice to see it in a pretty and appropriate place. I think it would be appreciated even more.

Beautiful work of Art

I've seen enough wood turning videos not to be dubious about the "raw" material. But I definitely had to see what this frankinwood was gonna become.

Stunning! Magnificent!

Sooooo beautiful...

Lovely piece of work, thank you for sharing your technique. What sort of glue were you using to affix the slabs at the beginning? Cheers.

Outstanding!!

Beautiful work.

nice job well done I love it wow

I loved it, I would do a couple of things differently, but I like what you did with the material at hand, well done.

what is it? lamp base , vase. so beautiful.

Looks stunning 👏🏼👏🏼👏🏼

The work of highly skilled crafters always looks easy...I feel that I could turn this urn even though I have never used a lathe. I really like your work and admire your skills

Absolutely gorgeous.❤

Like 👍👍👍

تسلم إيدك حفظكم الله يا فنان

Very nice

Nice!

Nice, but what is it? It's not a vase as it can't hold anything. It's not a lamp.

AWESOME! 👍

Beautiful as always

В боковых медальонах хорошо смотрелись бы какие-нибудь миниатюры или портреты.

Muito bom trabalho parabéns pra vc 🇧🇷

Nice work 👍

What is it? besides big.

Que ingenio yan maravilloso, una obra hermosa!!!!👏👏👏💖💖💖💖🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷

Beautiful work but get rid of those gloves. You catch those cotton things on that piece and you’ll lose a couple fingers in an instant.

Respect.

well done but, no security in using maschines

This is how all videos should be. Fast motion, no dialogue and no stupid and annoying music.👍

When that thing started spinning omg

😮nice

Wow istimewa skills good mr

What's it good for?

Anyone else waiting for him to lose a finger😂 lol

Bello veramente

Wow!!

Beautiful work 👍

Do you sell your products???

É um trabalho duro mas no final se torna uma obra de arte maravilhosa

All that work & trouble for this ?

Another beautiful work of art!! Amazing 👏!!!!

I just have one Obvious question. WHAT is it please???

Uma bela utilidade inútil.

This is my first video of yours. Do you have any of just your lathe ????? I looked through your channel and didn't find anything. Did you build it?

Мастер РукоЖоп. Кривые руки не переделать.

What glue are you using?

💖👌💯👍⚘️❤️

Seeing the glue lines in the main body kind of blows it for me ...

Без шаблона, "на глаз" - охренеть... Сколько же надо учиться, переводить материалы, чтобы такое мастерство наработать?

Please, what is the red wood ?

What is it though? 🤔 it needs to be hollowed out.

Beautiful work...

So well done!

Fantastic work!!!

A major "No. No." is turning with gloves. A long-sleeved shirt isn't wise. One little mistake and he's in the ER. Whether intentional or not he needs to post a warning pointing out gloves aren't recommended. Otherwise a very nice video.

Yes but more prettier than not hollow that is so good

What is it?

Roll up the shirt sleeve

watch that thumb or you might not have it anymore

You took way too much off of the bottom. I would only trust putting 1 flower in that vase. Sorry, just my opinion.

Would you PLEASE get rid of the long sleeves while you're working around the machines.... you scare me.

😀😊😅😅

7:03 wtf?

Lindo

That much work without surfacing the blocks before gluing makes my body hurt to watch!😟😟😭😢😥😥😥😰

Wonder how many “craftsmen” in that factory are missing digits or have serious injuries from their poor safety protocols? Use a push block, take the gloves off, and get your thumb away from the large spinning mass…not a huge deal…makes me itch…laughing though how people pay thousands for high- end tools and are matched by guys using sharpened metal rods…

Intro way too long.

# 1. Wood must be very cheap where ever you are! # 2. You keep playing fast and lose with the lathe & tools and they will be calling you nubby pretty soon! I guess it's good art but just not very practical! 🤔 I'll pass! 😐

УЖАС!!!!!Полное Г....!!!!!!

Well named - Woodturning Crazy. A waste of wood here, far too much turned away to dust. Poor glue-up, lines showing and inaccurate centring giving side panels of different sizes. Should have been hollowed, the glue joint at the base would have been ideal for this. All in all, a poorly thought out and poorly executed attempt, although the overall shape is pleasing. I haven't mentioned the use of gloves yet, maybe I'd better stop there.

Слабо вазу порожньою зробити??? ХАЛТУРА!!! - Старий -

If you learned to use correct tools you wouldn't have to use a grinder to smooth it out.

Please clean your nails a little bit better next time.

Wasted use of what looks to be Mahogany, the brushed-on finish and an accordion !.................................

Nein

Meh! 😮‍💨 Jk! 😅

😮😮😮😱😱🦘🇦🇺🐨

Crude and unimpressive.

Your glue joints are of poor quality and very distracting.

It's too tedious watching you cut, plane and glue each piece of wood in this video. In the future meby you could just show one and then maybe the glue up then the trimming, turning and finishing of your project.

Nuostabus darbas 👍👍👍 Linkėjimai iš Lietuvos 🇱🇹 🥂☕☕🥧🥧