CREALITY FALCON 2. The best laser engraver? Most powerful in its class. Cutting 3/4 in plywood

No video

CREALITY FALCON 2. The best laser engraver? Most powerful in its class. Cutting 3/4 in plywood

Рет қаралды 6,306

Күн бұрын

This is a very detailed review of Creality Falcon 2 22W laser . I will show you all you need to know plus tons of examples, best settings for all kinds of projects, and lots of tips and tricks. I love this laser and I think you will too. Use link below and discount code at checkout 20FALCON to get 20%OFF
IF YOU WOULD LIKE TO SUPPORT THE CHANNEL AND PURCHASE THIS BOX OR ANY OTHER STUFF THAT I MAKE YOU CAN DO THAT NOW HERE. www.skylerewing.store
========================================================
Affiliate Links
=========================================================
The links in my video description are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase
BUY LASER HERE AND USE DISCOUNT CODE 20FALCON : Creality Laser Engraver 22W Output, 120W High Power Laser Engraving Machine CNC, DIY Laser Cutter and Engraver Machine for Metal and Wood, Paper, Acrylic, Glass, Leather etc, 17" x 16". amzn.to/44LOTPI
Official Creality Falcon 2 Laser Engraver, 40W Output Laser Engraver Machine, DIY Laser Cutter and Engraver Machine with Air Assist, 25000mm/min Speed Laser Engrave for Wood, Metal, Acrylic, Leather. amzn.to/3t1cyOW

Пікірлер: 45

@ShortieSRT4 11 ай бұрын

You literally just saved me 500 bucks with your discount code, I'm glad I waited a day to order mine! Thanks!

@woodworkingwithSkyler 11 ай бұрын

Glad I could help! Let me know if you have any questions when you get it.

@pbgrafx 10 ай бұрын

OMG, your home is absolutely luxurious! You have a full-on library in your living room! No wonder you are so knowledgeable about your craft. Love everything you do!

@woodworkingwithSkyler 10 ай бұрын

Thank you so much!

@norm5785 8 ай бұрын

Mine arrived severl days ago. Came just as your did, excelt i onky received one test piece of wood.. 10 minutes to put it together and another 5 minutes to download and install the firmware updates that came out in November. This my first Laser, but i have good bit of experience with CNC machines. It does an awesome job. The Tulips looked just like a 3 D image with some shading that lookedime color.

@zeus9855 5 ай бұрын

Like your videos. You took the time to show settings & results. My falcon2 didn’t come with the beer can engraver or the grid plate it did come with plate but no honey cone plate. I was lucky mine came with two pieces of bass wood. Not sure what country dot TO is but over here that link is for a 22 watt laser.

@adrian-mu3jr 11 ай бұрын

Just discovered your channel and spent the morning binge watching. So much Great content. Thanks

@woodworkingwithSkyler 11 ай бұрын

Awesome, thank you!

@curtisg7924 11 ай бұрын

Love the videos. Please keep them coming. Very informative with added humor. Thank you. Cheers from 🇨🇦.

@woodworkingwithSkyler 11 ай бұрын

Glad you like them!

@sigh_of_the_times 8 ай бұрын

You did a great job. Thank you very much for the video.

@norm5785 11 ай бұрын

Thank you for such a wonderfully done Laser review. Looks as if would make a wonderful addition to just about any woodworking shop. Everyone stay safe, happy 😀 and healthy. From Henrico County Virginia

@woodworkingwithSkyler 11 ай бұрын

:) Thanks Norm

@fredwienbarg5051 10 ай бұрын

This is an excellent instructional video! Thank you so very much!!!

@timbits.4232 11 ай бұрын

Thank you, Skyler.

@woodworkingwithSkyler 11 ай бұрын

You are very welcome

@gerritgeldenhuys2763 6 ай бұрын

Everyone misses the biggest negative about this laser. You cannot remove the shroud at the bottom of the module. This effectively renders the machine useless for engraving anything that has hardware attached to it that is higher than the focus height, like watchbands for instance.

@tony5339 11 ай бұрын

Thank you as this is a brilliant and well informed intro to the Creality Falcon 2. I love your projects and your workshop looks great but worry about the trip-hazard cables on the floor!

@jimgeelan5949 11 ай бұрын

Im with you that workshop needs a good tidy up, welcome to the laser review channel 😵‍💫

@woodworkingwithSkyler 11 ай бұрын

Thank you. Yes, I will work on cables management

@fabog3732 7 ай бұрын

Coupon code does not work

@phaedruscj3330 6 ай бұрын

The wood looks black where the laser cut the for the examples shown. Is that a permanent burn mark that has to be sanded off?

@victoriakonung9369 5 ай бұрын

By any chance. Do you know how to disable Fire alarm completely. I'm working outside and every time sun comes out Fire alarm triggered and it stopes working. It creates a lot of hassle for me. Please, help

@aristevons6389 11 ай бұрын

I just bought a 40w Falcon and I am hoping you could help me with the settings for cutting and engraving. I need to know speed and power setting for different thickness and materials. Please can you point me in the right direction?😊

@LUXPLEASURE 10 ай бұрын

Great Job! Have you tried engraving ABS material?

@pguin1000 9 ай бұрын

Are you set at inches or mm?

@froudster 9 ай бұрын

A very informative video..Thank you. When you refer to speed and power you say 70 speed and 70% power. The speed seems very slow? Do you mean 700 or maybe even 7000?

@woodworkingwithSkyler 9 ай бұрын

No, I mean 70. It depends on what you have your settings set as. mm per sec or mm per minute

@froudster 9 ай бұрын

Got you..Thanks. I'm set to mm/min@@woodworkingwithSkyler

@antaljanos1984 5 ай бұрын

As I know, it' absolutely not recommended to use LED lasers with 100% intensity. Am I right?

@woodworkingwithSkyler 5 ай бұрын

I use mine at 100% all the time

@davidhabener5767 10 ай бұрын

My question is, can the laser be upgraded at a later time ? And thank you for what you do.

@woodworkingwithSkyler 10 ай бұрын

Yes. Available in 22W and 40W interchangeable modules

@fortyoneshades 11 ай бұрын

Looks like a great machine! Do you have a recommendation for a better enclosure?

@woodworkingwithSkyler 11 ай бұрын

I kind of like the one from xtool because is hard sided but dont know if will fit creality machine

@brucebartolomeo2755 11 ай бұрын

Will you be doing a review onthe 40w Creality when you get it? I like the idea of cutting wood up to 3/4 inch.

@woodworkingwithSkyler 11 ай бұрын

Yes, of course. Unless is no good, then I won’t review it:) I am sure is going to be awesome

@brucebartolomeo2755 11 ай бұрын

@woodworkingwithSkyler great. Looking forward to thorough review. Good job.

@outbak2 9 ай бұрын

Hi Skyler, will this laser give similar results for the 3D tulip engravings you showed in other recent videos? I am worried the 254 DPI resolution will not be good enough to achieve the results i am after as the files on Etsy say they are 300 DPI. Thanks for all your videos, I have found them very informative.

@woodworkingwithSkyler 9 ай бұрын

It should be very similar. But I will have to tell you when it comes to engraving I do prefer the Xtool lasers machines.

@jaymehennek5671 11 ай бұрын

In your opinion witch laser is better. Longer B1 20w or the Falcon 2 20w

@woodworkingwithSkyler 11 ай бұрын

Falcon 22W for sure, without a doubt

@jaymehennek5671 11 ай бұрын

Thank you for your input. @@woodworkingwithSkyler

@ljgault 11 ай бұрын

I know you said in a video that you planned on keeping the Longer as your go to laser but now that you tried the Creality laser do you still feel the same. Another question are you using millimeters in all your laser settings. Thanks for an informative video.

@woodworkingwithSkyler 11 ай бұрын

:) decided to keep creality. Also spoke with longer and creality and they going to send me the 40W. I use inches but sometimes mm