the wall of progress! love it! every blacksmith - bladesmith should have one!
@chrismac2234 Жыл бұрын
Wow someone who knows what damascus is on you tube. Al Pendray would be proud. Tbh I'm quite proud. I've been interested in wootz Damascus since I was a boy. I'm nearly 50 now. Well done M8
@TyrellKnifeworks2 жыл бұрын
The knife turned out amazing! Seems very strong and durable. I know the patterns will only get better. It’s an exciting journey!
@HeavyForge2 жыл бұрын
Thanks Denis! I’m actually surprised the amount of watering at the edge. Next blade definitely quenching thinner and forging cooler. If you get a chance check out Alchemy Steels on IG. Niko probably makes the best watered steel on the planet! His stuff is amazing. Him and Peter Burt we’re a big help to.
@jacobchristian18232 жыл бұрын
@@HeavyForge Nikos steel is fire!
@stephenjohnson6841 Жыл бұрын
Sometimes a project doesn't turn out the way we want. It's awesome that you are learning and growing! Thanks again!
@OhhhBugger5 ай бұрын
Honestly, the fact that you GOT a pattern is amazing by itself...
@sigmaforge50887 ай бұрын
This is incredible work and progress. I actually love the hamon line. Thank you.
@clydecox21082 жыл бұрын
this is the second video I've seen from your channel and I find your style very down to earth. you definitely have several things in your favor so if I may offer a small piece of advice. Don't beat yourself up, you're doing something that many can't. in the steel industry we have a saying " Not all men can make steel." keep it up I'll be watching.
@HeavyForge2 жыл бұрын
Thank you!! I’ve gotten much better and have a better understanding of the process since this video.
@clydecox21082 жыл бұрын
Well you just earned a subscriber
@jacobchristian18232 жыл бұрын
Nital works well but I find that dilluted nitric acid does wonders for revealing the microstructure of wootz. Also less dangerous lol you dont have to worry about spontaneous combustion of the alcohol in solutions greater than 10% nitric.
@shanewheeler713 Жыл бұрын
Agreed I've used it heaps for weld failure analysis, it really does bring our the grain structure of the parent material.
@theghost6412 Жыл бұрын
really have to keep the Wootz at a very specific temp while shaping and it is painstaking because it only gives you a chance to shape it for a second or two before it has to go back into the heat, and you arent supposed to quench it at all. I think it supposed to be air cooled, just once, only when finished forging the ingot into its final form. Then sharpened after that. If you quench them they lose some of their moleculer strength and can become brittle at the blades edge. But damn that blade looks awesome, well done keep practicing and you will have it down perfect.
@seed_of_the_woman Жыл бұрын
pendray roasts his longer and multiple times to control the cracking. i imagine the cracks are happening in the interfaces between cementite and the softer material. your water pattern looked really good. 👑 david
@HeavyForge Жыл бұрын
I wasn’t roasting long enough then. I roast for 3 hours and it made a huge difference.
@y-notforge89132 жыл бұрын
..making your own metal to make a blade, Kudos to you sir...!!
@HeavyForge2 жыл бұрын
Thank you!! And thanks for watching!🔥⚒💪🏻
@haydenwhitaker23702 жыл бұрын
Best thing to do for epoxy stuck to a blade is to take a razor to the epoxy and usually when you make a cut inward you can lift up and usually most of it pops off sometimes you gotta take your time with it
@motorizedbicyclenation53cu90 Жыл бұрын
Ok well I’ve seen a documetary where they actually got some true original wootz but they had to have it air tight
@richardmclean84142 жыл бұрын
Best video I've seen so far
@HeavyForge2 жыл бұрын
My Wootz dagger video is much better. I’ve learned much more since I put out this video.
@danielstellmon53302 жыл бұрын
I'm not a blacksmith, but I do watch a lot of KZfaq. The best way I've seen to get the top ingot our of your blade was to weld a holding stick to the top and pound flats into the ingot by hand. After that put it in the press.
@TheCoalDragonForge2 жыл бұрын
Man that stuff seems like a challenge
@greydaddie2 жыл бұрын
The overheating may have affected the pattern, next blade should turn out better. Nice knife though.
@allanbrown75262 жыл бұрын
The Hamon gives it such an amazing style 😘
@richardmclean84142 жыл бұрын
You definitely know what you're doing I've seen other videos and they messed up this part of the process in the beginning of forging...
@mustamuri8 ай бұрын
Pimeässä pajassa on helppo pitää woodz terä taonnassa alle 800 celciusta , itse onnistuin hyvin kun 25 vuotta sitten taoin Juha Perttulan antamaa woodz terästä .
@ljoraanstad2 жыл бұрын
crushed it!
@patw9992 жыл бұрын
Could call it the "Wall of Learning."
@danielstellmon53302 жыл бұрын
After the board test I want to see you do the ABS tests with just woot steel knives.
@HeavyForge2 жыл бұрын
Check out Peter Burt’s videos he has some vids doing abs tests on his Wootz blades.
@davidhamm11962 жыл бұрын
If I would have seen this video about wootz before I voted, I would have voted for your dagger.
@HeavyForge2 жыл бұрын
No problem!! I appreciate you watching!
@motorizedbicyclenation53cu90 Жыл бұрын
Wootz….. when ya melt it down do ya cover it with glass wich would melt first float to the top and seal the oxygen away from it?
@motorizedbicyclenation53cu90 Жыл бұрын
Wait ya use cheap crap metal to seal it? Well glass would work to perfect seal it every tim but yeah ya may wanna use a layer of cheap steel during basic forging and grind it off idk 🤷🏻♂️
@bharat136611 ай бұрын
Ukku Steel or Wootz steel is stolen technology from Southern India, it's almost 2200 yr old technology, even Romans used our swords. Muslim rulers exported these ukku ingots to Damascus who later renamed and stole the steel process as their own. Britishers when learnt about these steel sword technique, they took it to Europe and disbanded all local Indian blacksmiths who knew the exact process, most of such blacksmiths were killed or forced to be farmers. Over few generations the exact process of making non-rusting, feather weight, sharpest ukku steel swords was lost.
@weseethetruth158 Жыл бұрын
Looks more dendritic. Did you not thermal cycle?
@HeavyForge Жыл бұрын
It look like shit to be honest! There’s a number of factors where I went wrong but I’ve learned way more since then if you watch my more recent Wootz videos you will see.
@weseethetruth158 Жыл бұрын
@@HeavyForge yeah I'm interested to see if anyone has had as much success as Al pendray.... RIP Al.
@HeavyForge Жыл бұрын
@@weseethetruth158 there is, as a matter of fact, there’s smiths that have had better success than Al.
@weseethetruth158 Жыл бұрын
@@HeavyForge point me in that direction to my knowledge as far as consistency Al and his crew got the best results.
@HeavyForge Жыл бұрын
@@weseethetruth158 that was long ago. A lot has changed since then. Check out Niko Hynninen on IG he recently released a paper with verhoeven on a different method. Peter Burt, Ric furrer to name a few others. Myself included have achieved watered patterns and I can now consistently achieve watered patterns. It’s worth mentioning that Al’s process was not his real process. Most of the info on Wootz out there is misinformation.
@motorizedbicyclenation53cu90 Жыл бұрын
Wait this isn’t real wootz is it?
@Charlestonkayakandfishing2 жыл бұрын
Nano tubes
@samgjon2997 Жыл бұрын
Don t say anyways, you ll take only one by one , so , say anyway