I thought that I was looking at tv static for the first couple of seconds of this video

Looks like you... *puts on sunglasses* Blew your engine YEEEEAAAAAAHHHHHH!!!

great..great..great.. This paper machines work very well and If you within the cylinder is coated with graphite powder (you can use a pencil tip) , it will be more slippery and will not compression leak .. because the paper is "porous" material .. if you use the same cylinders and pistons for stirling engine (power piston) , will work best.... good work !....

i scaled this model 2 : 1 and found that it takes more to get the piston to turn but since there is more mass you get twice as much power, it has very little torque though. i found this channel on the show outrageous acts of science.

I started following you Al and am really impressed with your work, great job and super impressive!

There is something happening at 0:52 seconds. It lasts for 6 seconds. There is more to this than meets the eye.

13 years ago and bro still replies 🙂

amazing a very amazing model

u deserve a sub 4 them all

I am very impressed, very nice, and worth putting under glass or the whole class to see

Very good! Amazing!

@Chumbbo , not exactly. The process is the following: you blow into the tube, pressured air moves the piston down through the opened valve, this energy is passed to the flywheel, and the valve is getting closed; then the flywheel turns all mechanism further at the expense of accumulated power , and the valve is getting opened by the crank and the pusher, and the cycle is repeated.

Clever, like it. Regards

stupendo!!!davvero un capolavoro!

Hello, it looks amazing, and works amazing too! I really want to make this model too, but i just made the flyywheel and the piston part, i cant make the "careburator" i dont know how to spell that. Could you please make a video how to glue everything?

Thank's it's a machine paper beutifull

Nice cant wait to go check out how to make it

Awesome! That's a great idea!

@azn00234 . Oh, yes :) In truth, I already thought about it. But the air pressure for this model should be quite high( = the balloon should be really giant :) ). My second model ("In-Line 4-cylinder engine paper model") requires much less pressure, and I hope one day I'll build engine paper model that will be able to be used in vehicle model.

this is so cool! great job, im thinking of making these as a hobby and its great to see that its even possible

Woooah! This works just EPIC MAN! 😎😎 could you make a video, showing everything step by step? Your paper things are amazing! I subscribed for that job... Just wow.

im having hard time understanding instructions, can you make video on how to make it, that would be cool as hell

Cool

круто))))

sounds like my go kart

cool

Wow, amazing and great job! I really want to make this model, could you make a video how to glue everything? I subscribed.

Hello i would love, if you would make a how to make video, please... I tried to make this model, but i just made the flywheel and the "big part". I dont know how to glue that model even with instructions with template... Thanks, and i just love this model!

been looking for an engine like this, wish the links worked, stinks

Btw just asking if u can provide templates for the rotatory motor

Have you thougth about turning this intoa small business? Maybe, selling pre-fab kits?

0:02 I thought it was tv static lol

hi, I have been trying to make this engine since the past couple of weeks now but I don't understand the assembly of pieces 19,26,31 and 17. plz help

Show us how to make it

Can u make a turtorial or a release blueprints?

Wooooow .... Thank you veery much for sharing the model .... Please, could you share the others ones?

Cool! Just cool! Can you make a video how you build this? And which paper do you use for it? Thanks

Can you post a disassembly or a mechanism video?? It would be very helpful!

Please, find download links in video description

wait so bassically u blow into it the piston goes down, the pressure is let out by that spring thing, the piston goes up somehow and repeaT?

Any chance of some build videos or some more in depth/clearer instructions, just the one in download are a bit confusing? thanks

Hello Aleksie , when ever I saw the video first time I did not believe but now I believe this video please give me some important tips actually I don't believed that how these small paper engine are looked but those plan end instruction that you give to me are not printed beuz that of large size.can you please explain that what is the actual size or please me in cm and what is the diameter of fly wheel and please tell me the size of fly wheel box in cm.what is piston diameter I will be grateful to you if you reply!!!

Yes, right

Holy god

@TheNickdude10 , see assembly schemes (you can find link to download them in the video description)

What is "A" ? That noted on that instructions

can you show it more detailed? or simplify the instructions? Pls respond

Have just updated / added new links for downloading. Please check.

Please check updated links from description. I've just checked them - every link works for me

why is the piston and air valve offset by 90 degrees, but not 180? plz respond

it would help if you make a video showing a 360 view of this engine. i would really appreciate your help.

@TheGlueFace , the link to download plans is in the description

@TheNickdude10 , see additional links for downloading in description

@nothingssmore thanks

@PYRoMONKEY56 , yes I think I can. In truth, I have already created such instruction earlier. See full description of video for details please.

download link in description updated

Great Video! Can you help me make this?

Please tell me what to do with 27 and how to do the springs (25)

@nothingssmore can you make an assembly vid because I cant really understand the instructions in the download

So how many miles to the breath do you get? lol

Insane but how can i make one

How does that work?

wow

you use your breathe as Co2?

здравствуйте, вы молодец! я пытался сделать такой двигать, но к сожалению у меня не получилось(

Hey u are amazing. Please tell us the making process

i want to make one. wowwww.

Can I please buy one of these engines?

this is very cool and i want to make one but the links does´nt work for me

I like your Paper Engine but AFAIK they are built without a proper port for exhaust gases. Using the tolerances between piston and cylinder as exhaust might be nice for a paper model, but I can't use these ideas for a steam engine.

Hello can someone please help me! I want to use this motor for my investogatory project and attempt to light a bulb with it. What part of the motor do I connect the alligator wires to?

can you make a ballon adapter for it? if not i do it myself and share with you

Please make a video on how to make it I tried and it’s frustrating

Автор сделай туториал пожалуйста я рапечатал но непонимаю ка жто собрать

Aliaksei im making my own paper engine with your scans.. I have a probem with rods. If i make them from paper... after some time they bend and lose their hardness. How do you make rods- shafts? I just try to roll the paper around itself... but it's not hard enough

Tutorial plis i don't know intruction

Hello the files are locked May i hlave acsess?

dang i cannot get the piston righjt

Здравствуйте, можете по подробней видео заснять?

@TheGlueFace , sended.

i mean how to make the engine out of paper

How did you make the wheel rotate so smoothly?

Can u post a video on making that

@Jsut210 , sended.

Could you please do a instruction video

@PYRoMONKEY56 , write your e-mail, and I'll send files to you. Also you can find much more models from paper on this web-site: only-paper.ru The one problem is this is russian site, but you could see the photos of models and photos of assembly process.

I'm shocked tell us more about your engine I want to build the same

Do you use any kind of bearings.

dude seriouzly with russian ???? omg it took me 1.5 hour to translate it .....

What is the point of the cylinder part in the middle of the prism at 0:23

puts another link please.

How the gas distributing method works ?

Как он легко движеться

А куда уходит воздух на обратном пути поршня? Просачивается через зазор между поршнем и цилиндром?

How to make that

Здравствуйте!Я пытался сделать такой же движок по вашим чертежам но он не работает т.к воздуху некуда выходить.Я пытался решить проблему отверстием под клапаном и поршнем но он работает только на 5 оборотов.Как дальше поступить?

@Buffalodick101 , I've been thinking about it for 10 years, and trying a lot ;)

i want the template

are you sure thats all papper

How to make?