LIVE | Installing Tailgate Central Locking to an MQ or MR Mitsubishi Triton L200 ute

No video

LIVE | Installing Tailgate Central Locking to an MQ or MR Mitsubishi Triton L200 ute - its EASY!

Рет қаралды 13,944

Күн бұрын

Check out our DIY ute roller cover install here: • LIVE | Secure Ute Roll...
In this episode we show you have easy it is to install a central locking kit to a modern an MQ or MR Triton or L200 ute. This guide can also be used as a guide for other model and brands of utes!
These kits secure your ute tray when fitting a hard cover, roller shutter or canopy and take under an hour to install!!
Please note the MR Triton L200 has two different handles. Premium models have a long style handle with the garnish which uses a different mounting bracket which we show through the install. Order the correct kit based on the handle type you have. The MQ and base model MR Triton L200 uses the short handle and kit as we install in this episode.
Below are links to the two different MQ/MR central locking kits:
Short handle - www.ozcanopies...
Long handle - www.ozcanopies...
Below is a link to the shutter we fitted along with accessories:
www.ozcanopies...
Thanks for watching - get out there, have fun and stay safe!
#ozcanopies4x4
#workliveplay
#triton
#l200
#adventure

Пікірлер: 10

@TheAlexBradford Жыл бұрын

You've done another great video. My kit came with instructions for installing the kit, but failed to give instructions on where or how to wire it in. Your video saved the day 👍

@boselecta Жыл бұрын

Legend! Great video!

@MrMuzza72 2 жыл бұрын

good job and thanks, this has been added to the list of things to do!

@WorkLivePlay 2 жыл бұрын

Awesome, thank you!

@PeninsulaDroneography2024 2 жыл бұрын

Thanks for this, quite timely as I have an MQ as well and was wondering how to do this. Mine has a hard lid with a key lock so would this still work or do I need a different kit to lock the hard lid and not the tailgate ? Thanks again mate,

@WorkLivePlay 2 жыл бұрын

No problem at all, if the hardcover uses the tailgate to latch closed (which some do) - you might find that you can't open the tailgate independent of the cover. So if you need to open the cover to enable the tailgate to open then its probably not going to solve access without a key. Worth checking. With canopies and the roller covers the tailgate locking is a great feature.

@hasangozali6496 Жыл бұрын

Hi, where can i buy this lock? I live in indonesia though. Do u know if its available in my area?

@landcruiserv8vicadventrure627 2 жыл бұрын

Do you think I could run 6 x actuators the Same way? For a Ute canopy.

@WorkLivePlay 2 жыл бұрын

Sorry about the late reply. That should certainly work as long as there isn't too much voltage loss between all actuators. I would probably use the wiring from the factory loom as a trigger to a relay. That way you can run heavier wire into the circuit for the canopy actuators supplied by the relay. This would be more reliable.

@landcruiserv8vicadventrure627 2 жыл бұрын

Thank you, think I might do the relay!