IF YOU'RE THINKING OF LIFTING YOUR MR TRITON WATCH THIS VIDEO FIRST!

Рет қаралды 33,666

MRTriton

2 жыл бұрын

In this video I give you my personal opinions regarding installation of a 2 inch lift on an MR Triton

Пікірлер: 98

@lawsongleadell595 2 жыл бұрын

Love how you always give an honest review on things, so many people chuck in a lift/bigger tyres from day 1 of owning, when really the stock car will probably be completely fine for there needs

@jamesgillam6478 2 жыл бұрын

My lift on my MR is about 80-90mm. After market UCA's, diff drop, the lift itself is Profender adjustable remote res, running 33.5's on a zero offset. Love it 👌

@tedeganagondi 2 жыл бұрын

Just done it with 2” body lift and a little bit cutting.Zero offset rims 33x12.50 r17.No ucas no diff drops

@jamesgillam6478 2 жыл бұрын

@@tedeganagondi Nah wouldn't need any of that if it's just body. How much was the 2" body? And did you do it yourself? I'm sort of considering adding 1" body to what I've got haha would love to get 34's on

@makeaustraliagreatagain4204 2 жыл бұрын

I just purchased a Triton 22 MR, put a tjm bar on front and full under neath protection, i have noticed adding the 100kgs its a bit stiffer at front over bumps, dropped 15mm but have had this car in all types of terrains so far, i would consider just beefing up the suspension for ride quality but do not need anything over 25mm as it clears most things now , i want to keep all the running gear as close to factory standards....

@harrowingabyss4518 2 жыл бұрын

Great video as usual 👍 Some people act like you need a 3" lift and 33s to go to coles. 90% of people do it for looks and they just need to admit they spent thousands for looks but one day might do a dirt road to engage the 4x4 system.

@iandickinson342 5 ай бұрын

Most people who own highly modified 4wd,s are dead set wankers.

@oldhatman6769 2 жыл бұрын

2021 club cab Triton stock standard, use every 2nd weekend in WA, have loads of fun, and drive to work on week days. WA has some long distances to travel so long distance road comfort is a big factor too.

@gavinmartin7187 2 жыл бұрын

Perfectly said mate. I'm still waiting on my new MR Triton (GLX-R) to arrive and have been enjoying going through your videos for your thoughts and ideas. I already know the info in this video and certainly don't intend on doing a lift for now, but it is great to see someone telling the straight up honest truth about it all. keep up the great work.

@mrtriton5405 2 жыл бұрын

Thanks mate! Glad you enjoy the content 👍

@johnsambar2658 2 жыл бұрын

How long have you been waiting?

@gavinmartin7187 2 жыл бұрын

@@johnsambar2658 2 months so far. 3 to go

@johnsambar2658 2 жыл бұрын

@@gavinmartin7187 fingers crossed there's no pushbacks for you. Some people say theirs came on time, some got pushed back multiple times. It may also depend on the model, apparently the GLS and up requires a chip/semiconductor which is increasing wait times.

@ronancosgrove1975 Жыл бұрын

Wise words. I live in WA and find the stock Triton can do almost every track I need to go on, some of which are gnarly enough. I think driver capability is a bigger issue than vehicle capability in most cases.

@lrzetec 2 жыл бұрын

After getting my Triton serviced. My mechanic warned me in replacing the rear rubber brake lines. At full droop, you could play a note on the brake lines. My lift was only 30mm. So if you lift your Triton, pay attention to brakes lines, ABS cables and locker cables too. You do need to modify them. No problems in the front lift, although my top swing arm is paper thickness at full droop with the shockers.

@jaspreetbains2776 2 жыл бұрын

Will give you better approach and departure angles plus fitting the bullbar , winch and lights you may need an upgrade in the front to keep it all level. Large tyres need more power to spin them and they require bigger braking effort so not always an advantage. my np 300 has 255 65 17 stock in a Highway terrain. Ive fitted 265/70/17 mt light truck construction. gives an extra inch of lift . works well in the rocky stuff and mud but was rubbish everywhere else. If i did it again i would go a 265/65/17 all terrain. when stock suspension is flogged out ill get a 40mm lift and good shocks. I have bash plates which help slide over things that may get caught up .

@cyclemoto8744 Жыл бұрын

Well thought out explanation Mr T which should help novices understand the reasoning for a suspension upgrade or remain stock. Cheers

@TheCam468 Жыл бұрын

Great help of info mate👍🏽

@feralkittiesforyou8914 2 жыл бұрын

Going up from your 29 inch OD tires to tyres with 31.5-32 OD tyres will help

@tedeganagondi 2 жыл бұрын

Bofore lift kit tires is a must for your driving purpose.Tires makes a huge difference.

@bradleyswift1986 2 жыл бұрын

We went efs elite 30mm but went up a lot more than that with 250kg constant in the rear was perfect towing the camper 🤘

@markholly3757 2 жыл бұрын

If you occasionally add extra loads to the tray, Ironman leaf helper springs are another good option.

@michs1708 Жыл бұрын

Great Vid. Good information. thanks heaps.

@celsoliu7106 2 жыл бұрын

I went with 2inch lift from ironman. With 32.5" ROH Assaults +18 on my MRtriton fits great no scrubs.

@paulviron265 2 жыл бұрын

I’m running 255x75x17 BFG Mud on my MQ with a 30mm lift Bilstien lovells spring. No rubbing. I assume that would be similar to an MR. The handling ride quality could be better with an upper control arm. It also gives me about 240mm ground clearance from my rear diff.

@chrismills5263 2 жыл бұрын

Haven't lifted mine yet but looking at the ironman foam cell pro with the UCA upgrades

@keithoztournut7042 2 жыл бұрын

Hi there, you should look at caravan adventure aus,on KZfaq,thay put 550ks constant rear leaf springs in back to tow caravan and weight in canopy,did the job but didn't lift front, like you said only lift if you need to.👍 It's a Triton

@lc1966 2 жыл бұрын

Many years ago I knew a old fella who drove a Landrover Series 1 from Melbourne to Darwin in the 1950's... He took the roof off and dropped a full size kerosene fridge in the back so he could have a cold beer 🍺

@brettjones6440 2 жыл бұрын

I am waiting on a new Triton to be delivered and have been looking into a lift kit what are your thoughts on getting a aftermarket camber correcting top suspension arm. I have heard the stock arm limits down ward travel due to hitting the lower section of the shock absorber. Good channel keep it up.

@jfeather213 2 жыл бұрын

Cheers mate keep it up

@lrzetec 2 жыл бұрын

I've got a 2021 GLS Triton. I found the stock suspension absolutely awful. The ute feels nervous over bumps and then got totally worse when installing ARB bullbar, side steps and brush bars. Didn't really want a lift but went for EFS XTR which is 30mm. It totally changed its behaviour and drive like a dream when ute is empty. Love your vids, keep up to good work.

@andrewford80 2 жыл бұрын

Did you install the suspension upgrade yourself or get someone to do it?

@lrzetec 2 жыл бұрын

Got a 4x4 shop to do it for me. I couldn't get a kit cheap enough. Went online and unbelievably the 4x4 shop was cheaper to buy and get them to install. But please do get your brake lines extended, at full droop they will be tighter than a guitar string. Also get a small bracket made to fit on the diff to give extra length to wheel sensor and diff locker wires. Got my brake lines made by a local brake shop and 100mm longer than standard.

@andrewford80 2 жыл бұрын

@@lrzetec Spot on, thanks for the advice mate. Appreciate it :)

@Roberto.Giuseppe 9 ай бұрын

Totally agree!

@MotoGuzziMoto 2 жыл бұрын

Thanks for your series of videos! My Club Cab MR is finally arriving next month and my plans are no lift kit, quality shocks (Dobinson MRAs), original springs with possibly a leaf removed from the rear, and 265/65x17s. I will run it very light with only a tow bar and no rear bumper. I would also like to try some quick release sway bars (for off-road only). Anyone have experience with that on the triton? Are they legal?

@TheBreno82 Жыл бұрын

Thoughts on a front and rear 25mm spacer lift kit to help fit bigger tyres on stock 18 inch rims? Mines a 2019 GLS-Premium (I like the rims so wanna keep). Looking for a little more clearance and more aggressive look now that I have a fibreglass canopy installed. Cheers mate

@patrickhaste1846 Жыл бұрын

Cheers bro, saved me 2k with this vid 😂

@lowebudget1077 2 жыл бұрын

I’ve done many mods to my car but if I was to have my time again the first mods I would do is lift tyres bullbar and snorkel wouldn’t waste money on anything else beforehand

@bugsy1254 Жыл бұрын

My MR has a canopy 85 kg, drawers 85kg, tow bar 35 kg and a fridge. On the front I have a bullbar also about 85 kg. When it's packed to go away it weighs in at 2,550 kg. It drives fine and sits well on the road. The only problem is when I drive on dirt roads with lots of undulations, it bounces a lot. It seems that the rear shockies are unable control the bounce and when I look underneath, the leaf springs sit fairly flat. It's a fair bit under its GVM so I find the bouncing a little disappointing.

@lowebudget1077 2 жыл бұрын

I’ve spent about 20-25k on mods for my mr I’m just out of Adelaide maybe one day we can go for a 4wd compare the difference I’ve got 4” lift and 33s Diff drop and upgraded uca

@mikeclarke3990 Жыл бұрын

Had a 2" lift on my D40 Navara, not going to waste the money on my MR Triton, just get a larger set of tires for offroad eventually.

@tatuaalbert3112 2 жыл бұрын

Another good bit of advice mate, thanks. another question, what kind of compressor do you use?,not sure if youve done a vid on this.

@mrtriton5405 2 жыл бұрын

Thanks mate! I currently run a build in ARB compressor. I'll be sure to talk about it next time I'm airing up 👍

@desrad6416 2 жыл бұрын

Hay Bro can you do a video on the biggest wheels and tyres that will fit in the triton or just AT tyres , not the manufacturers specs the real try it stuff with no scrubbing !!!! that would be awesome :)

@mrtriton5405 2 жыл бұрын

That's be an interesting video for sure !

@lowebudget1077 2 жыл бұрын

Well I’ve got a 4” lift and 33” tyres on mine with +25 offset rims and it only just barely scrubs when at full lock. If I changed my rim offset I’m sure I could get it not scrubbing

@roughnecktrekker1976 2 жыл бұрын

I’ve got 265/70R16 on my stock MQ. Gives a little bit extra height and definitely rides better. Plus with this size your Speedo reads exact so be careful. As most cars read 5kmh higher than actual speed. The 265’s make it spot on accurate.

@levigoulder6639 Жыл бұрын

I’ve got 265/75R16’s on my MR which is 31.6” diameter. It looks pretty good-much better than the 29.4” factory tyres. No scrubbing at all, even when putting it through it’s paces off road. Would prefer a slightly wider and taller tyre (285/70R17-32.7”), but it means a wider rim, and it’s probably going to scrub without a lift or at least cutting the guards

@lc1966 2 жыл бұрын

When you consider 95% percent of travel is on the black stuff a lift is unnecessary and sometimes a liability - Over the years I've owned many lifted vehicles yet these days I don't bother - Good tyres, planning and driver technique gets me to where I need to go without any mods.

@lukem2260 Жыл бұрын

How hard do u go thou ...do u climb hills and rocks surface ??

@lc1966 Жыл бұрын

@@lukem2260I grew up in the golden era of off-roading which was the 90's... We had vehicles like the 60 and 80 Series, GQ Patrols and unlimited mods, parts and tyres along with open tracks to drive on. Now days things have become very restricted, Insurance companies have cracked down, laws have been changed and conservation has become far more important. My last serious 4x4 was a 93 80 Series... It sat on 35" TSL Swampers, a 4" lift ect... It was an awesome vehicle in those day's yet it would never pass today. When I was younger I just wanted to find somewhere hard to drive yet these day's I'm more inclined to plan a trip and drive to a destination without destroying my vehicle. I don't miss the days of filling my headlights with water, starter motors full of river silt, electrical failures and getting stuck overnight in sub zero temperatures in a vehicle filled with water.

@lukem2260 Жыл бұрын

@@lc1966 cool m8 ...thanks for sharing ..

@wos253 2 жыл бұрын

Any chance of doing a video of your opinion on spotties vs light bars?

@skippee358 2 жыл бұрын

Led vs heligon, I found led is very harsh on my eyes after a hour or two and when back to the old IPF lights

@alandaddydaycare200 11 ай бұрын

i'm looking for better rides, hard to find good ones apart from lift kits. Loaded 4x4 has a standard heigh kit that suppose to give a better ride. but the price is close to a lift kits installed...

@mariusnel1542 2 жыл бұрын

I added some leaf spring helpers from Iron man to help with towing my Camping trailer, quite happy with it. Did your nose of the ute sag allot with the aftermarket bullbar ?

@mrtriton5405 2 жыл бұрын

Good to hear. It only dropped slightly 👍

@mariusnel1542 2 жыл бұрын

@@mrtriton5405 cheers mate

@Aphony66 7 ай бұрын

Lol... I have 600kg constant load on my MQ Triton. Works fine on bitumen but I will be upgrading to Tough Dog 500kg+ new rear springs and shockies. +/- $1500

@hew_pew_8867 2 жыл бұрын

Hey mate, what's your thoughts on diesel pre-filters? I am thinking whether it is worth getting or not. Thanks

@mrtriton5405 2 жыл бұрын

Worth the money if you're happy to spend it. If your budget is tight and you don't travel remote its probably not necessary 😎👍

@bradleyswift1986 2 жыл бұрын

Hey mate you should do a get together with a heap of Tritons I would be down for it do a trip to eagleview or loveday would make for some good viewing👍

@mrtriton5405 2 жыл бұрын

Good idea mate!

@rafafelix6594 2 жыл бұрын

@@mrtriton5405 when are we organizing that? I'd be keen

@bitsandbobs1766 2 жыл бұрын

I'd be interested in that also...

@noahjbarr 2 жыл бұрын

When do you think your getting new wheels and Tyers?

@mrtriton5405 2 жыл бұрын

When the Mrs lets me or a company sends me some for free 😆

@michielmortier7083 2 жыл бұрын

Can you do a simular vid about underbody armor /bashplates

@mrtriton5405 2 жыл бұрын

Sounds like a good idea

@michielmortier7083 2 жыл бұрын

@@mrtriton5405 maby also include recovery poins for the mr 😉

@tugboat8475 2 жыл бұрын

If you were to be given a free and installed 2" lift through a respectable shop. Would you?

@mrtriton5405 2 жыл бұрын

Depends on the brand and what the shop want in return 👍 Always happy to talk to potential sponsors

@calamarininjabeast5866 4 ай бұрын

Not to mention your new car warranty is finished if you lift your new car

@simondelaney2958 5 ай бұрын

Is yours an auto or a manual?, I brought a manual because I’ve never owned an auto ever, first car was a manual but I’ve been told auto’s a way better for off road 4x4, what do you reckon mate ?

@mrtriton5405 4 ай бұрын

Mine is manual. I agree that auto is easier offroad but I've always preferred manual for offroading. Bit more messing around but you actually get to drive the car 👍

@AdmissionGaming 2 жыл бұрын

How about bash plates I think they are required on the mr

@mrtriton5405 2 жыл бұрын

The MR has a basic bash plate that does a decent job. Could do with an upgrade though 👌

@clivebrittenden943 2 жыл бұрын

I took a relatively light hit to the factory bash plate on my MR . Broke the front diff actuator, sucked dirt up the vacuum line to the control box on back of transfer box and had to replace both. Have since fitted after market 4mm steel bash plates. End of problem.

@AdmissionGaming 2 жыл бұрын

Do you get vibration/shake in your triton, not just take off but at some speeds particularly highway ones?

@mrtriton5405 2 жыл бұрын

Not unless I have a significant amount of weight in the back 👍

@AdmissionGaming 2 жыл бұрын

@@mrtriton5405 mine gets vibration at 80kph +

@MitchellHart-ig1ui Жыл бұрын

I get them at highway speeds after a bloody alignment, so annoying

@100ccollier Жыл бұрын

Have you had problems with rear suspension making squeaking sound.

@mrtriton5405 Жыл бұрын

Yeah mate that started the first time I took it offroad. Took it in for a service, mentioned it and they greased it up which got rid of the noise 👌

@damodoesall6240 Жыл бұрын

Do you need a lift if you put on a steel bullbar?

@mrtriton5405 Жыл бұрын

I wouldn't say you need a lift but you do lose a few cm ride height at the front of your vehicle when you put a bar on

@johnsambar2658 9 ай бұрын

I just have nightmares about blowing a CV 30km from a bitumen road all for the sake of 1cm of wheel clearence.

@riaanolivier1643 Жыл бұрын

Sorry don't know were else to ask but can the Triton be set up so that lights stay on for a short time after switched off

@mrtriton5405 Жыл бұрын

Hey, as far as I know it's not a standard feature and might be a bit complex to do as an aftermarket feature 👍

@riaanolivier1643 Жыл бұрын

@@mrtriton5405 Thanks a pitty however small thing for most but very useful when parking in dark areas

@mrtriton5405 Жыл бұрын

@@riaanolivier1643 absolutely agree!

@scottsv96 Жыл бұрын

Lifts get the chicks

@gaskit1448 2 жыл бұрын

A mate of mine was trying to tell me they needed to lift their Triton because of the weight of the aftermarket bulbar... I just replied with 'ok' and changed the subject.

@minersadventures1323 2 жыл бұрын

You don’t need a lift with a bullbar - you do need higher rated springs though. Mitsubishi even change the springs when you fit a factory bullbar.

@gaskit1448 2 жыл бұрын

@@minersadventures1323 I'm getting an ironman bullbar on my MR, I'll keep that in mind when talking to the dealer. thx.