Worlds Sharpest Boots - Caulk Logger Build

Рет қаралды 19,640

Күн бұрын

Want your own custom caulk boots? Check out JK - www.jkboots.com
Caulk/Cork boots are the companions of those who navigate the realms of logging and the unforgiving terrains of forestry. These boots are designed to provide the highest possible traction on slippery logs and ground to keep the wearer locked in place. This style of boot is typically seen paired with a tall shaft and thick leather construction, so many caulk boots require some custom fitment.
The boots shown in the video are black roughout lowers w/ smooth 12" uppers , lineman patches, block heels, paired with caulk spiked outsoles.
While these boots might seem extremely odd to most people outside of the industry, these are the prized tool of old-school loggers for safety and ease on the job.
00:00 Hand Cutting Uppers
01:17 Cutting
02:00 Prepping
03:28 Sewing
08:34 Eyelets
08:46 Sewing
13:03 Hooks
13:22 Wet Lasting
15:22 Dry Lasting
17:32 Bottoming
21:09 First Stitch Down
21:39 Making Outsole
24:16 Second Stitch Down Row
24:41 Heeling
26:20 Sanding
27:26 Finishing
29:11 Adding Corks

Пікірлер: 33

@dp1381 8 ай бұрын

I’d love to feel the grip these babies provide on a slick, wet, debarked log in the woods. I bet it feels like you have a superpower wearing these in the woods.

@brycecrousore1985 10 ай бұрын

Artists making art! Thank you for a new video!

@GEORGIABOY23 4 ай бұрын

This made me wanna throw my boots in the trash😂

@robertrychlik616 10 ай бұрын

Beautiful craftsmanship ❤

@boldlygo3469 10 ай бұрын

Great work and beautiful results. As usual!!

@davidwhitten928 10 ай бұрын

Nice job another greatly skilled craftsman

@iakazul 4 ай бұрын

That's a mean looking pair of boots

@steveshipkie1624 10 ай бұрын

Nice looking boots

@pedroacuna7790 7 ай бұрын

Excelente trabajo.....una maravilla..de botas

@mbenjamin292 10 ай бұрын

Do you all make knife sheaths?your boots are out of this world wow.

@leelahd4428 7 ай бұрын

How do they keep they thread spacing so accurate?

@zvezdochet2020 10 ай бұрын

👍

@flugit 10 ай бұрын

Is that the standard height of the heel block for your caulks? I ordered a pair yesterday for work and the fella in the store assured me it would end up being the same height as the super duty heel but that looks way shorter because the rubber outsole is way thinner.

@jkbootsusa 9 ай бұрын

This was a custom heel that was requested by the customer. The standard heel for the Caulk boot is the same height as the Superduty's. Hope this helps!

@bengonzalez5215 9 ай бұрын

Is he just eyeballing the lace eyelits? Take some serious skill cause id of definitely screwed that up big time

@kemitchell 10 ай бұрын

Is wrenching the cleats down by hand preference? There has got to be a shop in Spokane that could whip you up a hex drive pin spanner to fit that cordless drill. They could probably angle the pins so it cams out over torque, too. Or your drill might have a limiter aft of the chuck. Just a fool here, attempting to be helpful.

@zygmuntthecacaokakistocrat6589 10 ай бұрын

I thought the same thing. A torque clutch on a smaller drill could be set lowish to get the right grab. You could just hacksaw the handle off the driver to fit it into a drill chuck (I bet they come free in a box of 1000).

@mikeford963 10 ай бұрын

Why not just build an adapter to run on a drywall screw gun?

@jeremiesalvas3654 10 ай бұрын

Hi, I'm a Timbersports/logger competitor, I would like to make home made shoes with calks. I would like to have the same T-Nut than you use for the calk. Thats not a standard 1/4-20" because the calk are fine thread. I already have the calk. Can you help me with the T-Nut. Thank you.

@nuclear9977 9 ай бұрын

Calk and nuts 😮

@benhicks1392 10 ай бұрын

I wonder why they hand cut the uppers instead of using the press thing?

@MITUK 9 ай бұрын

Good question, maybe the upper is entirely custom fitted to someone's foot which would mean they don't have a standardised template for the part of the process

@benhicks1392 9 ай бұрын

@@MITUK good point! I never thought of that.

@kdgreen533 10 ай бұрын

How much

@mustafa-913 10 ай бұрын

Nyc boots 🥾 and please order link ID and 👟 image in my India' price please

@johnvelas70 10 ай бұрын

Two questions: 1.) Why isn't a 12" standard? It seems easier to cut a boot DOWN than to custom cut UP. 2.) I hear the 700 (V-Bar) sole is no longer available, is this true? (I own corks, but my new job says they are a no-go & I need a steel toe.) I'd order 12" all eyes (same as my corks).

@crosspointholsters1636 10 ай бұрын

The V bar sole is a dress sole. 12 isn’t a standard because it’s not a very common size to get.