Thank you for viewing my youtube channel. If you have questions or concerns about any of the videos or the equipment posted within them you can contact me at 423-299-3535 via text message only. Thank you again for viewing!
Пікірлер: 48
@johnRfarrerАй бұрын
Thanks for posting this. I have a McKinley and wondered how well one of these would work with it
@rallypoint1 Жыл бұрын
That’s the combo I have in my mobile and I love it!!! I run mine on 5 on the RM and it’s about 350-375w. Talked skip from here in SoCal across the country, south tobTrinidad and west to New Zealand/Australia. You can’t go wrong!!!👍🏼
@Charlee2015 Жыл бұрын
Really enjoy these equipment match ups, with equipment
@jerrypolverino60252 ай бұрын
Best videos on KZfaq.
@JoeR203 Жыл бұрын
That was my setup. I got rid of the McKinley and went back to my RCI RG-99. My 503 is the older one with the gold casing.
@jerrypolverino60253 ай бұрын
I am going to buy that linear for my McKinley.
@Don.E.632 ай бұрын
Me too! Looks like a good combo!
@jerrypolverino60252 ай бұрын
@@Don.E.63 I can’t wait to get mine installed. I am going to run 1.5 Watts input to the linear.
@Don.E.632 ай бұрын
@@jerrypolverino6025 man good deal, I know what you mean, I just put up a new antenna on my base now I'm like you I want that amp, I also love the mckinley radio, you'll be set with a great system!
@jerrypolverino60252 ай бұрын
@@Don.E.63Be careful using that with a base station. You would be easier to find.
@Don.E.632 ай бұрын
@@jerrypolverino6025 Yes Jerry your right, im just running a stock radio at the moment but I will heed your advice. Thanks!
@rodneymclemore8587 Жыл бұрын
I got my power supply from you Rooster and I’m very happy with it. I very recommend everyone to by that power supply from Rooster y’all will not be disappointed. 73s brother.
@Rooster_Radio Жыл бұрын
Thanks Rodney! Enjoy
@mattmiklos5360 Жыл бұрын
Hey Rooster it's Matt from Pittsburgh Pa..just wanted to let you know that I like your videos. Keep up the good work!
@mrvdbos Жыл бұрын
RM Italy makes fine Amps! And these KL503, and the HD version has also a Lowpass filter in it. I use the KL503HD, and also a KL505V. Nice video!
@rodlink6258 Жыл бұрын
Great combination. Finally understanding why my 503 HD ain't getting it done. Had my radio DK 2 watt input!!
@Wildersport7 ай бұрын
I would love to see that amp paired up with the new McKinley 2 FCC...
@Rooster_Radio7 ай бұрын
Only difference is the new McKinley has FM
@scottbamasime4338 Жыл бұрын
Great information as always..
@corvette652 Жыл бұрын
Great video
@jerrypolverino60252 ай бұрын
Rooster. You do a great job on your videos. Informative. I take your advice seriously. I am installing this exact combination in my mobile. I watched this video several times. What do you recommend for input power? I was not able to see the input power. Hey! That accent of yours. I’m from New Jersey. We might have trouble communicating. lol. Thanks for a terrific video.
@Rooster_Radio2 ай бұрын
2 watt carrier 25-30 peak swing
@jerrypolverino60252 ай бұрын
@@Rooster_Radio THANK YOU!
@neonnight346096 күн бұрын
what did you set the AM dead key at on the radio. thanks
@russfield8728 Жыл бұрын
Love your videos Rooster keep emailing coming! Gonna email you soon. Cheers Russ ..Down under.
@Rooster_Radio Жыл бұрын
Thankyou Russ! Waving right back
@ehayes5217 Жыл бұрын
What did u turn the McKinley's RF output power down TO in order to drive that 503?
@clarkustoo8 ай бұрын
I’m thinking one of these amps with a Tre Top
@zooyawk4526 Жыл бұрын
Excellent clip, rooster. I do have a couple of questions, and those are can you drive that 503 with more than 20 watts? Let's use 30 Watts as an example. Would that be overdriving the 503? If someone is considering the 503 is it safe to drive it with 30 Watts or, would one have to move up to the 503 HD?
@Rooster_Radio Жыл бұрын
Personally I'd go with the HD any over 25 peak
@caspian408 ай бұрын
I have a President Lincoln 2+ would this amp be a good choice for this radio and if so what would be the best power into the amp as to not damage it
@dakkadakka91897 ай бұрын
I have same set up am is getting good reports ssb gets good reports barefoot but with amp on reports of distortion like its over driven I turned rf power on radio down amp worked good with bonestock 980 ssb, is it possible the ssb power isnt getting turned down with the am ?
@michaelkirkwood3316 Жыл бұрын
So I have a older connex 3300 hp would the 503 opposed to the 503 HD what would work for my radio
@Rooster_Radio Жыл бұрын
Youd need the HD
@DavidReyes-1970 Жыл бұрын
What amp would you pair with a president Richard????
@SVerucci8 ай бұрын
What do you think of this amp for the Lincoln 2 +?
@chrispierce2942 Жыл бұрын
What's the cost of the radio with a peak and tune, alignment etc with a kl 203
@hess400 Жыл бұрын
Wht does a uniden 510 do pep?
@terryshrives8322 Жыл бұрын
I know im a little late this, what amp woud you run with the anytone 6666? I would seriously appreciate knowing.
@Rooster_Radio Жыл бұрын
Depends if it's stock or wound up
@terryshrives8322 Жыл бұрын
@@Rooster_Radio stock
@Rooster_Radio Жыл бұрын
@@terryshrives8322 probably a 503 or 503hd. I don't even remember the power output on a stock one, because to me it doesn't make sense to have a stock radio and run an amp. Get the performance out of your radio then worry about an amp
@StevieB-jj9fz Жыл бұрын
Hello Rooster i have a McKinley that pushes 28 watts, what it the best for that radio?
@Rooster_Radio Жыл бұрын
Depends on how big you want to go. Any low drive amp
@jackson4861 Жыл бұрын
What did you set the a.m. dead key to on the McKinley?
@Rooster_Radio Жыл бұрын
No clue, but recommended deadkey on this amp is around 2.5 watts so around that give or take
@jackson4861 Жыл бұрын
@@Rooster_Radio thanks
@Worldwide75 Жыл бұрын
Does that radio have channels in it? Like band A-F