You tried so hard and got so far. But in the end - you had to pull the axle.. :D
@rklos113 жыл бұрын
Abraham Linkin up is dis ba doom bishhh 👌🔥💙
@DunnDifferent3 жыл бұрын
I totally sang this when reading it. #RIPChester
@BillinSD3 жыл бұрын
You win the internet today 🤣
@somkimcpuff41153 жыл бұрын
Axle had to fall to get the lift But in the end,it doesn't even matter
@odogzero3 жыл бұрын
I immediately knew your reference! Just sayin.
@SDMacMan3 жыл бұрын
Sarah you probably don't want to hear this about an almost 20 year old Nissan Xterra, but this has been my favorite project of yours so far. 😎
@marcusmaddenov24513 жыл бұрын
Me 3
@mindtraveller1003 жыл бұрын
Same here. Besides being a cool project, i love offroad and all related to that, and i also have a 20 year old 4wd Nissan that´s not an XTerra, but is relatively similar, so i´m also learning something useful.
@jfruser3 жыл бұрын
yup
@gianpaologliori36043 жыл бұрын
Yes!
@duffman8253 жыл бұрын
Agreed
@Civicky3 жыл бұрын
I only think I know my way around cars until I watch you girlie 😍
@SarahnTuned3 жыл бұрын
I literally youtube’d how to adjust torsion bars first. Most of what I do I just read tech data or watch someone else attempt it first if I’ve never done it before.
@ramonpunsalang33973 жыл бұрын
What a difference a lift makes. No more crawling-on-her-back Sarah.
@gregorykellerman38763 жыл бұрын
Kinda miss those camera angles...
@timharrison7073 жыл бұрын
Wow it looks a lot different than when you started that project I bet your sisters happy
@beborodner9303 жыл бұрын
You do a really great job of capturing the struggles with all this stuff. And you have a great spirit of balancing the frustrating bits with the awesome bits when all your hard work is done and the end product can be enjoyed. Great channel! Thank you!
@johnmorgan16293 жыл бұрын
Love you hiding behind the mud flap when grinding. But MVP of the vid goes to Jeff. RIP Chester.
@fishflash13 жыл бұрын
Having a friend next door is an unexpected benefit to the new shop.
@johnceragioli96713 жыл бұрын
“That’s not a wrench, this is a wrench!” Thanks, Sarahodile Tunedee!
@mrwest55523 жыл бұрын
@John - right mate 👍
@mostcom3 жыл бұрын
👍
@kevinlyon95013 жыл бұрын
Always handy when you can an extra set of paws to come and help. Next week Jeff helps Sarah to remove the oil pan.🤣🤣
@Primus543 жыл бұрын
Didn’t get the first lyric reference but got the “Crocodile Dundee” reference. Big positive at the new shop: Friends to help out and keep you from going crazy. Big negative at the new shop: Friends that keep you from going crazy are fun... equals blowing off the morning and working at 10:00 PM. Lots of great entertainment, great work, and innuendos! Thanks, Sarah! ~ John
@chrisviera3 жыл бұрын
Sarah in rare form this is the first video I got what are watching in there.... someone will understand. We appreciate the extra time it takes thanks for this video.
@griffin._.m3 жыл бұрын
I'm just putting this whole series aside for later. You've been covering everything that I want/need to do to my own Xterra. Thank you so much!
@richardlapoint18453 жыл бұрын
If you wanna lift an xterra or even build one, here ya go 😂
@gmahvlus75673 жыл бұрын
I like your candidness when you talk about what you are attempting to do (ie torsion bar),! Great work Sarah!
@ColeSpolaric3 жыл бұрын
Jeff falling over scratching himself... We've all been there!
@mrwest55523 жыл бұрын
@Cole - Wha ! You saw that ? !
@UnkTob3 жыл бұрын
I haven’t. Have you fallen over while scratching Jeff? 😜
@Driftmaru863 жыл бұрын
I'm here for all of your commentary between the time lapses. I laughed so much!
@the_aby_ss_85303 жыл бұрын
drinking game when ever Sarah says “nut” we drink
@mrwest55523 жыл бұрын
@the_aby - ready, Scotch for me. 👍
@js09883 жыл бұрын
Every garage needs a Jeff!
@charlessmarr71073 жыл бұрын
The innuendo is particularly strong with this episode. It made my day!!
@2seeornot2see3 жыл бұрын
I used to work in my cousins auto-shop when i was a teen, learned a lot from him, but your teaching me more than I would ever expect.
@Doug_Morgan3 жыл бұрын
No lack of innuendos in this one, lmao.
@bryannobu3 жыл бұрын
The BendPak Grand Prix lift has elevated the difficulty of the installs that you're performing. I mean I can't imagine you doing this lift kit with jack stands!
@roymurray63743 жыл бұрын
In the words of the Kodiak. SARAH!!!! Happy Tuesday Sarah, stay excellent!!
@Ash-ir2zg3 жыл бұрын
You have brought back my love of cars, I was so over all the other car channels out there but you are absolutely amazing. Thank you so much for being silly and not afraid to make people laugh with you and at times at you for your antics. Absolutely love you. Keep up the great work. Also it doesn't hurt that you're absolutely gorgeous 😍
@watomb3 жыл бұрын
You got it done I would have spent days waiting for the tool kit to come in. Then I would have spent another week thinking about it. Your sister is so lucky
@slowjoecpsf3 жыл бұрын
I have a 2000 Xterra I pick up for $950 just bought new tires and they rubbed. So I was searching KZfaq and you popped up! Thanks for the entertaining help. My Xterra is getting a (RISE) now that I watched your video. Your humor goes a long way. Thanks
@timglass60413 жыл бұрын
We all support you Sarah, you're doing everything perfect, Keep on making that big money girl. Best channel on KZfaq.
@patrickmoodabe97283 жыл бұрын
Fantastic work Sarah. Sooo much happier you can call on help when you need. This new shop is just what you needed, just when you needed it too. Cheers🤙🤙🤙
@jlons11043 жыл бұрын
Really enjoy your channel Sarah. Especially like watching you work on vehicles, your sense of humour, and your willingness to tackle a job that you haven’t done before. Buy an old beater sometime, film it as you fix it up, then auction it off on EBay.
@dradis13 жыл бұрын
What it meant to me will eventually be a memory of a time when Sarah tried so hard
@safarfsaf3 жыл бұрын
You tried so hard, and in the end it doesn't even matter. Lmao I love you so much.
@danm662 жыл бұрын
We just bought an 08 Xterra; which I know is different than your sister's, but I now think I need to do a similar lift on it because this looks so much better! I'm so glad I found your channel!!!
@louiedee28243 жыл бұрын
Love this new content. So many new characters now. So many cameos.
@harrycordell77693 жыл бұрын
You did great just so totally impressed how you clean making an old car practically bran new.
@Patriot-US17763 жыл бұрын
Finished replacing the engine in my 2006 nissan xterra. FUN FUN!!!!!
@terrylessmann22743 жыл бұрын
@9:54 Love the Jeff photobomb! And it's always fun when you have to break out the BFH to get work done.
@johnulrich55723 жыл бұрын
Your jokes are on fire today. "This is a wrench".
@killersushi993 жыл бұрын
*Watching Sarah fiddle with the torsion bars on a Nissan is so funny to me because I used to loosen mine to lower my truck. You have to remember on a Nissan that the gas tank is on one side of the frame so the weight isn't even when trying to get the truck level. I always had to put the truck on the ground and drive it back and fourth so the suspension settles into its normal ride height. Then you can do a final tweak to get the height the same on both sides.*
@vwjunkie033 жыл бұрын
Thank you for not calling it a grease fitting 👍👍
@PhonyFriday3 жыл бұрын
Ive watched a lot of your Xterra vids and enjoy them so much. Its a labour of love to own one of these truck.. suv.... jeep... things. Welcome to the club!
@jamesspash55613 жыл бұрын
acetylene/ oxygen torch set. North east salt road area. Rust is the norm. we call it the fire wrench.
@mostcom3 жыл бұрын
over here for the last 5 decades I called it the gas wrench
@michealbaer49173 жыл бұрын
Sarah is sisters best friend. Your mechanic work is quicker in the shop with the lift & helpers for tought assistance. I'm surprised you're feet go all to the floor Sarah! You are a leggey lady standing under the vehicles on the lift. I am surprised how tall you are Sarah! Your getting better too (looks & machanicing), great work!
@gamerjunction53353 жыл бұрын
I love the "Bang on it Harder with a Bigger Hammer" techniques you have been showing off in this episode
@timglass60413 жыл бұрын
I've always loved that body style, it has a lot of class. I was talking about you Sarah.
@graemelliott39423 жыл бұрын
Great video! A really good alignment shop should put the vehicle on 4 scales and fine tune the torsion bar adjustment by reading the corner weights after that then adjust the camber, caster and toe!
@davidboyce64273 жыл бұрын
Wow it looks great. Sarah u should be proud. You work hard and u don’t give up🤗👍. You’ve got a shop and this year you’re continuous shine will flow🤛🙏
@kennethd70483 жыл бұрын
You've done an excellent job Sarah.. nissan looks great!
@babybuluga15543 жыл бұрын
I think this video holds the new record for the most innuendos out of all your videos ever made!😂. Round of applause! 👏🏼
@vsavage_old_rockerz3 жыл бұрын
love the new shop, your hair and your honesty. peace
@nigelcox14513 жыл бұрын
Sarah, suspension bushes are best torqued with the vehicle sitting normally. If done with the suspension hanging, they twist once sat. Once you're happy with all the adjustments, slacken each and retorque, with the weight of the vehicle sat on its wheels. A real pain for some. A four-poster lift is useful, unless you can get the lift legs under the suspension arms.
@wtoprock3 жыл бұрын
It's the Double Entendre show! With your favorite hostess Sarah!!
@digital42823 жыл бұрын
"I tried so hard and got so far, but in the end it doesn't even matter"
@mindtraveller1003 жыл бұрын
I was never a Linkin Park fan, but i know that song. I was not getting there when Sarah mentioned it, don´t know why...
@davegillette9533 жыл бұрын
Damn almost beat ya!
@ballynf3 жыл бұрын
shit now I have to go watch that video again
@skeetermcswagger0U8123 жыл бұрын
Plot twist, ........everybody got that!!!☣⚠️
@AaronandTaylor2 жыл бұрын
I'm so glad I finally came across your channel. I've been watching this Xterra buildout. I've been building out my 03 Xterra over the past year for overlanding. If there's one thing being my own mechanic has taught me it's that if a hammer doesn't work, get a bigger hammer.
@RDAnys3 жыл бұрын
You and I are probably the only individuals in the world that use the word "bonked". Everyone laughs at me when I use it. I hope you get better respect. 😄
@craigstrickland15723 жыл бұрын
Thank baby jeebus it is level now. Your band shirts are on point! Nice RV in the background too.
@geoffwalker39693 жыл бұрын
crocodile dundee thats not a wrench this is a wrench...love your skills with car building, love your channel
@whoguy42313 жыл бұрын
Great to see things don't always go to plan... That's real life right there! Thanks
@affordableentertainment38393 жыл бұрын
I wondered about the Lincoln Park songs and could not think of it, however having a dirty mind I chuckled at the the 3:41 mark. I like to watch you do work on the truck, you show how to do it with just mostly hand tools.
@suzuki2303 жыл бұрын
Those miles marker hubs are okay, they are prone to cracking and exploding. So be prepared for that. Idler arm brace is super nice.
@ChanoWilliams3 жыл бұрын
Sarah videos make my day. :oP Jeff makes my WEEK!
@hughsnyder8913 жыл бұрын
Sarah is once again super awesome. Her sister is lucky to have such a great big sister.
@thomas57143 жыл бұрын
With the sis edit hand off & shop move you might be able to tack 5 or 10 minutes more per vid - they will be watched, that's for sure. Great content.
@akaydogan3 жыл бұрын
Your tenancity never ceases to amaze. Although I am never going to own an Xterra or do this kind of wrenching, your channel is just plain interesting.
@jimmysarit5053 жыл бұрын
Love watching your build inspires me to build my car accordingly and not to neglect maintenance and then mod. Since I’m so use to modding and not up keeping My car
@stephenmoxley30043 жыл бұрын
Sarah, I got your reference to the movie. "That's not a knife." Thanks for the tutorial on Nissan torsion bars. I have an 85 King Cab with the same setup. I used to adjust Volkswagen Beetle torsions all the time, so I know what's involved. As always, keep up the great work.
@bryannobu3 жыл бұрын
Sarah's in the zone!
@jrzyboy993 жыл бұрын
Sarah...The struggle is REAL!!!!!
@alanmatthews59493 жыл бұрын
New channel... Sara beats the crap out of things!!!🤣🤣
@sranubus3 жыл бұрын
I'm sad and your videos put a smile on my face.
@grahamross63973 жыл бұрын
The innuendo is strong with this one... Luv it! Also luv the Mick Dundee reference.
@andrewmartinez16693 жыл бұрын
When I don’t watch your videos, however I do stop by; like. And on my way You are a genius! Eye candy 🍬
@nde-mt2yc3 жыл бұрын
Great job Sarah, You have made a huge improvement.
@brianmurphy87903 жыл бұрын
Sarah ~ The Queen of Innuendo. Always stay out of the sun and never bite too many people for lunch. BTW, that Def Leppard shirt is the best one you've worn yet - it reminds me of home.
@Nico_335i_DCT3 жыл бұрын
Great update! It looks like new from underneath. Now a nice polish and Celine has a great truck for years! Dutch regards, Nico.
@luish7773 жыл бұрын
Wow! You did an awesome you rock girl👍 dont know why but suspension is a big thing for me and I like what and how you do it.
@stonetempledave683 жыл бұрын
I did my torsion bars 2X, 4runner geometry changed with ball joint and diff spacers, you got it done.
@ttaylor77773 жыл бұрын
When using the large adjustable wrench please use it in the correct direction. You have it backwards at 6:23. They are not as strong in that direction and can break.
@afmoa3 жыл бұрын
Major camber adjustment needed. It will be interesting to see if there is enough adjustment.
@dvdadaudits75003 жыл бұрын
I tried so hard, and got so far, but in the end Sarah had to pull the axle🎵🎵🎵
@winstoncryer76063 жыл бұрын
You need to turn your crescent around you'll keep it tight you can strip a nut or bolt that way. You always put the movable ind towards direction you're turning the wrench
@robertfoley64303 жыл бұрын
Make sure the alignment shop times the bushings on the upper control arms or they’ll just bind and cause premature wear of the bushings.
@robanderson9603 жыл бұрын
Love your Def Leppard shirt
@newbwheeler97773 жыл бұрын
Sarah do the right thing and hit the boys up at fifteen fifty two and get a new set of wheels and tires. All your hard work deserves it!
@celestinoybarra30573 жыл бұрын
That was a nut buster of a video, yeah I had to go there 😂😂
@tedpalmer15373 жыл бұрын
Going to look awesome on those steelies
@rman80283 жыл бұрын
Impressive watching you install the bushings with the vise. I did have a flashback when you pulled ball joint apart. I had a '78 Mustang that popped an upper ball joint when I was driving home. Lucky for me it didn't fall apart until I pulled in my driveway!
@TroyPosey3 жыл бұрын
@Sarah-n-Tuned Linkin Park reference got... "I tried so hard, and got so far... But in the end, it didn't even matter..." The more 4x4 vehicles you work on, you'll find this to become a recurring theme song... 👍🏼
@erikpetrie6373 жыл бұрын
So many innuendos... I love it. 😄🐧
@don1120493 жыл бұрын
Sarah, you are absolutely awesome! Love your videos.
@leepopham-lithgow51043 жыл бұрын
Great vlog Sarah. I always enjoy your content as your accidental innuendos crack me up and it's great to see your mechanical knowledge at work. Keep up the great work.
@norvellharris17923 жыл бұрын
That was a great presentation, you are very talented in this field......
@guylatran28133 жыл бұрын
great video Sarah this pathfinder is brand new 😊😊😊
@woodswalker11113 жыл бұрын
I feel your pain. Driving in MI makes those things rust. Also, the lack of the certain tool often comes into play.
@mikehannahs3 жыл бұрын
Hello internet Sarah 😂😂😎😎😎 I love your interdiction in your videos, thanks for the awesome content
@robertkeable16273 жыл бұрын
Awesome as ever. Be well and stay safe.
@TheJoecb3 жыл бұрын
Can't wait to see the full restomod, coming soon!
@wrx2483 жыл бұрын
Another great blog. Thanks Sarah. I look forward to all your vids during this pandemic.
@9898dt3 жыл бұрын
Thanks Sarah! You're one of my favorite channels! 🤗😎
@sephiros98833 жыл бұрын
« Worse than I expected » sums up my life building an off road rig from an xterra 2009 indeed.
@markphilpot49813 жыл бұрын
Don’t take any crap. You said you learning as you go. You’ve been putting in work. Get yah something to eat and chill out. The truck is damn near rebuilt underneath. Looking forward to what comes next!👍🏻👍🏻Stay safe mates!😊👍🏻😷