WP AER Air Fork vs Andreani Spring Kit for Husqvarna FS450 @ Tangkak Circuit -Trackday Vlog

Рет қаралды 4,052

4 жыл бұрын

A trackday Vlog where I give my first impressions converting my WP AER air fork to an Andreani 106/KT3 spring fork as used on my 2018 Husqvarna FS450 supermoto at Tangkak Circuit, Johor Malaysia

Пікірлер: 15

@graemehills1103 3 жыл бұрын

As a potential purchaser of the Andreani cartridge system for my Ducati 900SS i.e I found your video and articulate thoughtful comments on the forks very informative. Thank you Kevin. I think you've swung it for me.

@imranibnismail Жыл бұрын

Bro, can I know where did you get the bike trailer made?

@tedschroeder1801 2 жыл бұрын

You can increase your lap time by turning on Map 2 🤙🏼

@unitedelectrician4334 4 жыл бұрын

Do u have the official site of the track operator

@tamasvarga1294 4 жыл бұрын

Hi. The mx cartridge is same supermoto cartridge? Supermoto fork is shorter.

@RideTheTrack 4 жыл бұрын

Yes you are right but the cartridge still works and the overall height did not change. Or at least it did not change enough for me to notice any difference

@Superdukedotnet 3 жыл бұрын

Also...can you post a link to the spring kit? Cheers!

@RideTheTrack 3 жыл бұрын

www.andreanigroup.com/prodotti/moto/106%7CKT3/?lng=en

@thomasbiader3022 4 жыл бұрын

Which spring u use for your bike ?

@RideTheTrack 4 жыл бұрын

Thomas Biader you specify rider weight when you order then they supply the appropriate spring. Unfortunately I did not take note of the actual spring rate they gave me, sorry

@thomasbiader3022 4 жыл бұрын

@@RideTheTrack thanks but you bought and install without problem ? Because for supermoto the cartdrige is short i think . I have a lot of problem with air and i want to resolve with this kit.

@RideTheTrack 4 жыл бұрын

@@thomasbiader3022 Not to worry, if there is even a difference in height, it is not noticable, either visually, or to the handling of the bike. There is zero installation issue. I am certain you will like the kit very much

@Superdukedotnet 3 жыл бұрын

What is that device you used to extend the Schrader valve on your old air fork? Thanks in advance.

@RideTheTrack 3 жыл бұрын

I didn’t extend the valve, thats the way it is from the factory (2018 model year)