WPL RC EXPERIENCE. What do I Think?

  Рет қаралды 52,791

Run That RC

Run That RC

5 жыл бұрын

In order from left to right: WPL C24, WPL C14, WPL B36, WPL B16, WPL B24zh, WPL B24. This is what I think of these and my experiences so far. Check out my other videos for more details on the upgrades and mods these rigs have. Have a great day and go RunThatRc!
Link to RTR C34:
www.banggood.com/custlink/Dvm...
Coupon code for 20% off:
BGC34CAR
C34 Regular kit version:
www.banggood.com/custlink/v3D...
Coupon code: BG34KRAC
Mn 99:
www.banggood.com/custlink/GD3...
Coupon code:BGRA99
Military blue RTR MN 96:
www.banggood.com/custlink/3KD...
Coupon code: BGMN96RA
Military tan RTR MN 96:
www.banggood.com/custlink/mvD...
RTR MN d90:
www.banggood.com/custlink/vmK...
Coupon code:BGRA90
Kit MN d90:
www.banggood.com/custlink/Kvv...
Coupon code: BGRA90K
MN Model mn45 kit:
www.banggood.com/custlink/GGD...
Coupon code: BGRA45
MN Model MN45 rtr:
www.banggood.com/custlink/D3K...
Coupon code: BGMNRA
My other WPLs:
WPL C24 kit:
www.banggood.com/custlink/KvG...
Coupon code: BG24KRA
WPL C14 kit:
www.banggood.com/custlink/KDK...
Coupon code: BGC24RA
WPL B36 kit:
www.banggood.com/custlink/vvD...
Coupon code: BGB36RA
WPL B16 kit:
www.banggood.com/custlink/DDv...
Coupon code: BGW16RA
WPL B24zh RTR:
www.banggood.com/custlink/KGm...
Coupon code: BGZHRA
WPL B24 kit:
www.banggood.com/custlink/mmv...
Coupon code: BGB24RA

Пікірлер: 236
@RunThatRC
@RunThatRC 3 жыл бұрын
Check out the links in the description or go straight to the official WPL RC website by clicking below: www.wpl-rc.com/?ref=DAVIDCLARK
@BlvlWmpower
@BlvlWmpower 3 жыл бұрын
The WPL owner talked about your channel like a year ago I think. You must get hooked up good dude!
@frankblue6828
@frankblue6828 5 жыл бұрын
You're videos or helpful to my WPL encounters. I appreciate your videos. Keep doing what you do. Thanks Bro!
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks for your support! Glad its helpful!
@BMXheath
@BMXheath 4 жыл бұрын
I found this very informative. Thanks a lot
@colehouston9663
@colehouston9663 5 жыл бұрын
My c24 was a completely stock rtr except for kit electronics from my old c24, the most reliable wpl/mn model/jjrc I’ve ever owned and it wasn’t until just recently that I found that the pinion gears in the new rtr are the metal ones, so definitely I recommend that
@AMAZINGRC
@AMAZINGRC 4 жыл бұрын
100% amazing video..!! Well done sir.!
@MaxDiggityDout
@MaxDiggityDout Жыл бұрын
dude, your awesome thank you for sharing. honest opinions are easy to spot but rare to see
@RunThatRC
@RunThatRC Жыл бұрын
Glad to help
@rustytoolman4912
@rustytoolman4912 10 ай бұрын
I did enjoy your video. I subscribed and looking forward to more from this channel. Thank you.
@RunThatRC
@RunThatRC 10 ай бұрын
Thanks I appreciate it! Welcome to the RTR Crew!
@elonmust4492
@elonmust4492 5 жыл бұрын
These trucks are awesome for the price! Great reviews
@shadenphoenix
@shadenphoenix 2 жыл бұрын
Very good info. Just heard about wpl and was wondering and researching them when i found this. Thanks.
@RunThatRC
@RunThatRC 2 жыл бұрын
Glad it was helpful!
@rubencosta6249
@rubencosta6249 4 жыл бұрын
From far the best and honest reviews!
@RunThatRC
@RunThatRC 4 жыл бұрын
Thanks for stoppin by!
@davidwarner63
@davidwarner63 3 жыл бұрын
I did enjoy the vid...thanks! Expect I'll be watching more mod vids soon. Just ordered the B36.
@RunThatRC
@RunThatRC 3 жыл бұрын
glad you enjoyed! thanks for all the support!
@AddyRCBuddy
@AddyRCBuddy 4 жыл бұрын
Well, I didn't leave a comment on this video before bro, but hey never is too late haha.. Honest video, as always 😸😸
@adamdavis5961
@adamdavis5961 5 жыл бұрын
Yeah... I em to find out what breaks, or what I break. Great vids man! Keep it up
@nhansme
@nhansme 5 жыл бұрын
Thanks for the Great honest review 👍 I found most of the times these trucks don’t run smoothly because of the drive shaft angle and the friction of the plastic drive shafts at the u joint. Like you mentioned I had issues with my B16 and jjrc q60 and changed to metal ones with the pin and locking ring and the problem solved.
@RunThatRC
@RunThatRC 5 жыл бұрын
Yup might be what the b16 needs or the center axle upgrade
@deandaniels203
@deandaniels203 5 жыл бұрын
You always do a great review.👍👍
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks! I really appreciate your feedback! Hope to get better for you guys as I continue. Thanks for your support! Now go Run That Rc!
@scottp2696
@scottp2696 3 жыл бұрын
Refreshing to see a nice honest video
@RunThatRC
@RunThatRC 3 жыл бұрын
glad you liked it! Thanks for stopping by!
@rcfungames
@rcfungames 2 жыл бұрын
Love the video, very informative 🤜🤛 You got my subscription 👍 Just got my first WPL RC, great RC's for the price ✌️
@RunThatRC
@RunThatRC 2 жыл бұрын
Thanks for the sub!
@shawnezell6053
@shawnezell6053 5 жыл бұрын
Awesome bro keep doing what you do 🤙🤙👍👍
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks bro! Always appreciate the support!
@RCModSquad
@RCModSquad 4 жыл бұрын
Neat stuff, thanks. 👍🏻
@gsgreenrcs3196
@gsgreenrcs3196 5 жыл бұрын
They are a lot of fun to build and play with I have 2 now and plan on collecting them all. Right now I’m sticking all my extra money on my scx10 getting it ready for my competition. Well keep up the great videos and you’ll be passing 1000 subscribers soon until next time happy Rc’n
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks I appreciate your support! I am still addicted to these and the new one coming out 😍. Have fun in you comp! Go Run That Rc!
@thatsmyrc
@thatsmyrc 5 жыл бұрын
great video down too earth and honest god stuff thumbs up bud!
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks I appreciate it brotha!
@modelnutty6503
@modelnutty6503 5 жыл бұрын
yup, they are what they are, and with some tinkering can be pretty good. yesterday finished near all the LED's in the C-14 budget beast project, all but the reverse lights. if I'd seen Gabriel Silvaz video before, MN-D90 would have got turn signals wired in using a 10A ESC plugged into ch1 with the steering servo.
@greasetits3
@greasetits3 5 жыл бұрын
Now I want to but the military truck too, just bought my first wpl, the c-34. They are good looking trucks and can’t wait to upgrade it and have fun.
@RunThatRC
@RunThatRC 5 жыл бұрын
Same here can't wait for that yota!
@bigroryhollar5023
@bigroryhollar5023 2 жыл бұрын
Thank you .. started my Collection of them good fir the money ..
@RunThatRC
@RunThatRC 2 жыл бұрын
Enjoy
@justcrawling1916
@justcrawling1916 3 жыл бұрын
Great info Bro 😎
@RunThatRC
@RunThatRC 3 жыл бұрын
Glad you think so!
@grrfy
@grrfy 3 жыл бұрын
very usefull video ,Thanks!
@DirtyBob2001
@DirtyBob2001 4 жыл бұрын
Just came across your videos and purchased three kits. Thanks for the great content.
@RunThatRC
@RunThatRC 4 жыл бұрын
Awesome! Some good builds you have ahead of you! my number one tip is to check everything for proper movement and make sure you have no binding. when set up just right they work well.
@DirtyBob2001
@DirtyBob2001 4 жыл бұрын
@@RunThatRC my C24 is built and waiting for ESC and receiver. I assembled axles on C12 tonight. B16 kit is next.
@RunThatRC
@RunThatRC 4 жыл бұрын
@@DirtyBob2001 nice!
@EnilionVeno
@EnilionVeno 3 жыл бұрын
Just got interested a bit in the subject, i think ill try that b 36 as my first bought rc.
@bikerunner-ry1ju
@bikerunner-ry1ju 4 жыл бұрын
I like your style 🙂 Amazing Collection 👍☺️
@RunThatRC
@RunThatRC 4 жыл бұрын
Thanks. I appreciate the support!
@urg0nnah8me
@urg0nnah8me 3 жыл бұрын
I bought the B-1 RTR on impulse because of the looks and price. I knew it could be upgraded so I ordered some parts for it. I just picked up the C-14 with some upgrade parts as well. Can't wait to have the full line of these things. They're awesome, especially when you consider the price. Finally, something I can let my kids use without fear of spending a fortune when something breaks.
@RunThatRC
@RunThatRC 3 жыл бұрын
Glad you enjoy these as much as I do!
@urg0nnah8me
@urg0nnah8me 3 жыл бұрын
@@RunThatRC They're satisfying on so many levels. I'm glad I found your channel and I appreciate the tips and tricks. Thank you for the content.
@donaldhenke2750
@donaldhenke2750 3 жыл бұрын
jealous of your collection.
@MKHITARIANVahram
@MKHITARIANVahram 5 жыл бұрын
Awesome 👍😉
@facebiter
@facebiter 4 жыл бұрын
Watched and liked most of your videos, love your stuff mate, great simple honest reviews. Keep up the great work. You should make a paint weathering video I think?!!! 👀
@RunThatRC
@RunThatRC 4 жыл бұрын
Thanks! I am not sure if I will be taking the weathering route soon. I like them to look new and get naturally weathered from using the rig. Im sure I will try it though and I sure will document my attempt.
@bwerx
@bwerx 5 жыл бұрын
Just got the WPL C-24 a few weeks ago and I can confirm that the axle gears and pinion gears are all metal. I also hear from others that these things are fast, but mine came with a low gear setting so, it can crawl once assembled. I had to buy the two-speed gearbox and metal replacement shafts since I've been hearing a lot complaining that the stock shafts break pretty easily.
@RunThatRC
@RunThatRC 5 жыл бұрын
Nice! Yeah that's all you need really to make them even more reliable and fun. I will be installing the 2 speed and metal gears upgrade kit on my buddies c14 here soon.
@shroomdark4383
@shroomdark4383 3 жыл бұрын
So far your the only guy who gives a honest opinion thanks 👌😊
@RunThatRC
@RunThatRC 3 жыл бұрын
thanks for stopping by! I am honest about my experiences with anything I make a video about. I will not accept any products that the manufacturer or seller wants me to lie about.
@shroomdark4383
@shroomdark4383 3 жыл бұрын
@@RunThatRC I respect that about you to many you tubers just say yh it’s good and don’t really do a review we’re you do 😊👌
@rcarty419
@rcarty419 3 жыл бұрын
Great video cool looking rig wanna get one only have 1/10 crawlers! But looks like fun cheap kit!!! Subbed Great info and style!!
@RunThatRC
@RunThatRC 3 жыл бұрын
I use to have nothing but 10th scale and bigger RCs. I can tell you the fun I have with these(if you like tinkering and fabricating) is just as much as my bigger toys. Thanks for your support and welcome to the RTR Tribe!
@dannyevansrcenthusiastrhod7172
@dannyevansrcenthusiastrhod7172 5 жыл бұрын
That's why I tune into your shit, it's real....You pay for your stuff, like the majority of us...👍👍💵💲🏁🏁...Please keep up the good work....im in the process of doing my mn90 kit....Banggood got me on a bag of goodies that was missing. I asked for one steering connector that was missing....When I emailed them my pics...they must of checked my purchasing history....Regardless.....They have sent me a complete replacement model 👍👍👍👍...😊😊 I'm going to have two of them...Might take a couple of weeks to get here.....so what....no big deal....I'll let you know...
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks for your support! I do like these things a lot. Same thing happened to me with my B36. Received with a dented rear cab and showed them a video and pictures and they sent me a whole new kit!
@madsrcbuggy
@madsrcbuggy 3 жыл бұрын
I appreciate your videos, dude! I'm looking into a 6x6 crawler sort of thing, probably the B16, it looks really nice.
@RunThatRC
@RunThatRC 3 жыл бұрын
B16KM and B36KM are pretty cool scale rigs. Thanks for all the support!
@killianseibel62
@killianseibel62 3 жыл бұрын
The c-14 is awesome and durable I drove mine off my friends 2 story roof a couple things broke but in five it was driving again its awesome tho
@seansrcconstruction
@seansrcconstruction 5 жыл бұрын
Pretty awesome collection
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks. I am loving these cheapo but great looking rigs!
@andrewmurphy8724
@andrewmurphy8724 3 жыл бұрын
I like building RC cars, Trucks, Boats, and airplanes and my neighbors know it, so they are constantly coming to me for advice and or to ask me to build/upgrade their new toys. I enjoy doing this and even the WPL cars can be turned into almost hobby grade cars.
@RunThatRC
@RunThatRC 3 жыл бұрын
That is awesome! The WPLs are fun tinker toys for sure!
@Paopolomololl
@Paopolomololl 5 жыл бұрын
Yea!!! the no. 500k subscriber!!!
@RunThatRC
@RunThatRC 5 жыл бұрын
I hope I can make it there one day!
@Isuzu_Paul
@Isuzu_Paul 2 жыл бұрын
Wpl brand loyal...lol Can't say much I stuffed wpl electronics and the wpl 370 2 speed into my mn99s. I wish wpl would come out with a 4 door or 2 door defender
@rcsnapon2132
@rcsnapon2132 5 жыл бұрын
Nice collection
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks!
@3Y3ECE
@3Y3ECE 3 жыл бұрын
Great video, thanks for this! Never thought these slower crawling style trucks would be so fun myself, but now I have two, and I'm runnin them more than my speedy monster trucks!! They also break a LOT less... I approve!! Keep up the great work!
@RunThatRC
@RunThatRC 3 жыл бұрын
Right on!
@GENERALWA5TE
@GENERALWA5TE 2 жыл бұрын
Great video, very useful information as I want to buy a kit form crawler. I haven't used WPL before but I like the fact they come in kit form. Will be watching other videos, but I reckon WPL could do a scaled 8x8 as that would be awesome. Also subscribed 👍
@RunThatRC
@RunThatRC 2 жыл бұрын
Thanks for watching! Some have modified wpl trucks to be 8x8. They are a great inexpensive way to try the hobby. Just remember they require patience and tinkering.
@melisasworld4568
@melisasworld4568 3 жыл бұрын
Nice bro
@FlutyCakes
@FlutyCakes Жыл бұрын
Im actually planning to buy a wpl b36 and im excited to buy it for my first rc truck
@RunThatRC
@RunThatRC Жыл бұрын
hope you have fun with the hobby!
@den41400
@den41400 5 жыл бұрын
Close to 1k views goodluck!
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks for your support!
@den41400
@den41400 5 жыл бұрын
@@RunThatRC glad for my fellow pinoy that i just know hahaha
@supastihl89
@supastihl89 5 жыл бұрын
Noticed th swapped front clip on the c series
@RunThatRC
@RunThatRC 5 жыл бұрын
It's a must if you have both c trucks lol!
@cjones_5point959
@cjones_5point959 Жыл бұрын
Awesome video! I just subscribed to the channel. My first RC was the C24 as well. I’ve been having a hard time finding wheels for it. Where did you find the wheels and what suspension upgrade kit did you get?
@RunThatRC
@RunThatRC Жыл бұрын
I am using either 3d printed wheels or stock on my wpls. Stock suspension wise as well.
@russwoodward8251
@russwoodward8251 5 жыл бұрын
Dude. I started with Heng Long tanks and now you've got me into trucks. Thank you. I'm having great fun with the WPLs and your videos are great light viewing at work on breaks. Check out Gary Hoff's channel sometime. He is scratch building a military truck and has lots of cool tanks, trucks and 3D part maker recommendations.
@RunThatRC
@RunThatRC 5 жыл бұрын
Sweet I'll check that out!
@ka4172
@ka4172 Жыл бұрын
If you want a way more performance metal is the way to go.Those stock plastic gears are the weakest point . With a descent ESC metal gears it will be a good RC Trail Truck.But WPL built the best looking RC Scale Trucks in this size!
@angels_gaming8309
@angels_gaming8309 3 жыл бұрын
I'm have the transporter 6 and the Ural 6x6. The only issue I have is the CJ 2A jeep binds in the front end when you turn
@RunThatRC
@RunThatRC 3 жыл бұрын
is that the q65? I have no experience with those but here they are similar in build. check for screws binding being overtighten.
@jamieofalltrades536
@jamieofalltrades536 2 жыл бұрын
I believe I saw that the C24-1 RTR comes with proportional steering and throttle.
@RunThatRC
@RunThatRC 2 жыл бұрын
It does but wasn't available yet when I made this video.
@rcintro1489
@rcintro1489 5 жыл бұрын
It's a shame the big guys don't have bodies as nice as these.
@RunThatRC
@RunThatRC 5 жыл бұрын
Right! These guys really give you some bang for your buck and the kits are just getting better!
@modelnutty6503
@modelnutty6503 5 жыл бұрын
when GearBest offered the RTR B-1 for 20 bucks free shipping.... oh heck yeah. wasn't happy with dual N20's in the C-14 (3D printed center casing) so it went into the B-1, it also got a set of kit tires, and your simple flex mod. it's still running the stock board with bang-bang steering (little N20's pull very small current). I leave it like that because there's no fear about handing the transmitter to a child to drive it, it isn't fast enough to hurt itself with the pair of 6v 400 rpm N20 motors. right now the frustration is inability to find the tan 5 gear transmission boxes for a single speed 2ch crawling+climbing upgrade, haven't seen them for sale anywhere!
@nealeware9163
@nealeware9163 2 жыл бұрын
Have you got a WPL 1/10 drift truck? I just got one and the first thing I must say is it is so well put together. There is so much you can do with them and they are a lot of fun. Mine cost me $98 Australian from the local RC store.
@RunThatRC
@RunThatRC 2 жыл бұрын
yes I do have a WPL drift truck. fun little RCs for sure.
@TruSwagTv2
@TruSwagTv2 5 жыл бұрын
Very nice video brother I SUBSCRIBED
@RunThatRC
@RunThatRC 5 жыл бұрын
Thanks for the support!
@TruSwagTv2
@TruSwagTv2 5 жыл бұрын
@@RunThatRC your welcome big bro
@javieralcazarmartinez2489
@javieralcazarmartinez2489 Жыл бұрын
The problem that you all have is that you are always thinking about upgrades in rc hobby.Cheers from Spain,guys 🇪🇦
@RunThatRC
@RunThatRC Жыл бұрын
yup sometimes upgrades dont make your rig better. I've seen upgrades that make rigs perform worst.
@donaldhenke2750
@donaldhenke2750 3 жыл бұрын
WHAT. you got all them.haha
@czechnolike
@czechnolike 4 жыл бұрын
Do you have a spreadsheet rundown of all your upgrades to all your vehicles? That would be interesting
@RunThatRC
@RunThatRC 4 жыл бұрын
I actually do not because I tend to mess with these trucks so much that they change a bit. But if your looking for electronics and gearbox advise. I recommend the WPL V3 esc receiver combo and most my WPL are running WPL 2 speed gearboxes as well. None of my trucks have aftermarket suspension. Just cheap to no cost mods sometimes like the leaf spring more flex trick. I have videos on my trucks and sometimes I make new ones with new mods or accessories I just installed.
@crushingvanessa3277
@crushingvanessa3277 3 жыл бұрын
I'm buying my first Wpl B16, well first rc to. My cousin is getting the MAN cabover version. Getting it with the full metal upgrade parts. I want to detail it to be more correct looking since I'm a truck model builder. i saw a set of proper 3D printed wheels offered on a site a month ago, but now the sites gone. Stuck with the metal six hole wheels. Also looking at using the rc pitbull 1/9 Temco NDT military tires if they fit. I went with the metal parts just because I don't know how well the plastic will hold up. I don't plan on rock crawling, not severe anyway, but want to make sure it's reliable.
@RunThatRC
@RunThatRC 3 жыл бұрын
check out WPL-RC.com. They have some full metal kits available.
@crushingvanessa3277
@crushingvanessa3277 3 жыл бұрын
@@RunThatRC I did. I decided to make it a Canadian army truck since I'm Canadian. They use the big single tires so I won't have to get 11 tires. Those would've costed over $360 if the 1/9 tires would fit. I will use the taller skinnier tires from the Wpl C series.
@stevendoyle2359
@stevendoyle2359 4 жыл бұрын
dont know if you mentioned are they 4wd\6wd or awd? as in like a subaru (awd) or 4wd like a toyota are the axles locked or free... anyway good info helping me make my mind up on which one i will be getting subing for the upgrade vids thanks heaps keep it up
@RunThatRC
@RunThatRC 4 жыл бұрын
Thanks for your support! Sorry so late with the response. These rigs are solid locked style axles just ring and pinion with no differential. Dont know why I haven't been able to see some comments till I accidentally bump into it.
@luna-md1vc
@luna-md1vc 4 жыл бұрын
What battery’s do u use for the kit versions ?? Great vid too well done sir 🤘🏻🤘🏻
@RunThatRC
@RunThatRC 4 жыл бұрын
I use anything from a 500mah 2s to a 1500mah 2s lion and lipo
@TheWoof2001
@TheWoof2001 2 жыл бұрын
Bought a c24 RTR like your blue c24, now the RTR ones do have proportional steering and throttle, been loving it, did the cut tires on yours actually make much difference?
@RunThatRC
@RunThatRC 2 жыл бұрын
I never tried it on a harder rtr tire. It should improve traction. My kit tires I cut up work well.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 5 жыл бұрын
Love GAZ 66!
@RunThatRC
@RunThatRC 5 жыл бұрын
They are good looking trucks and perform pretty good offroad after the flex mod.
@semperatis
@semperatis 5 жыл бұрын
I went for the MN model D90 instead (Kit),in the process of doing it up just now.
@RunThatRC
@RunThatRC 5 жыл бұрын
That's a good one as well.
@thatsmyrc
@thatsmyrc 5 жыл бұрын
I got one of those but havent done much with it.. been busy building rigs@@RunThatRC
@modelnutty6503
@modelnutty6503 5 жыл бұрын
with oil shocks (A285004) you do have to drill+tap 1/8" from top edge of frame just to the insides of front+rear trays for softness+flex, totally worth doing! you'll also need to weight the front rims. mine will get a WPL tan gearbox if I can find somewhere to buy the little &$#@%&....
@hellofromsoutheastalaskarc7517
@hellofromsoutheastalaskarc7517 2 жыл бұрын
Hello from southeast alaska how's it going today bro
@antrc
@antrc 4 жыл бұрын
They look so cool. Mine seem to keep arriving broken 😱😪
@RunThatRC
@RunThatRC 4 жыл бұрын
That's no fun. I had one arrive squished. I just contacted support and they sent me a new one. Sometimes it happens and unfortunately these sellers dont own the shipping companies so they are at the mercy of the shipper.
@user-rn9eb5vc3h
@user-rn9eb5vc3h 5 жыл бұрын
When you gonna make a fast one for drifting? Lol.
@RunThatRC
@RunThatRC 5 жыл бұрын
🤫
@TheGibsOfTheTube
@TheGibsOfTheTube 3 жыл бұрын
Saw this video and you should pin a comment or something mentioning that the RTR trucks now come with proportional steering. The only real difference between kit and rtr now are the kit has way better tires (soft) and some kit versions (KM kit) come with all metal parts. Saw this when looking for a WPL originally and it mislead me a bit until i found out they changed the RTR versions.
@nps3252
@nps3252 5 жыл бұрын
Plz build me which one is best jjrc q65 ,mn90,wpl c12,c24, Fayee I m biggner which truck have long life plz reply
@islandboirc6398
@islandboirc6398 5 жыл бұрын
Question I bought two mn-D90 rigs and the both of them the steering stopped working after the first run now I tried to go to my hobby store they jus blew me off so do u have any tips for someone who’s jus started the hobby plus trying upgrade for a decent price
@RunThatRC
@RunThatRC 5 жыл бұрын
Did you purchase the mn d90s in RTR? If so you would have to change out the radio system to upgrade it to proportional steering. The front tray should be similar to the wpl stuff and a regular servo the size of the wpl kit servos would fit right in there also you can run a 180 size motor in there for more climbing power. And you can use the wpl transmitter kit I recommend that comes with a battery and esc/receiver combo. That would make your d90s a lot better.
@geokiller789
@geokiller789 Жыл бұрын
The news also do come with proportional steering
@RunThatRC
@RunThatRC Жыл бұрын
yes they do nowadays.
@Adalwolf17
@Adalwolf17 3 жыл бұрын
How long does shipping take though?
@2chromosomen
@2chromosomen 3 жыл бұрын
Wish I watched this before purchasing the c24 rtr
@RunThatRC
@RunThatRC 3 жыл бұрын
If you purchased a newer rtr they aren't bad. A good starting platform for modifications.
@johnciambrone4746
@johnciambrone4746 4 жыл бұрын
Did you work out the center axle issue on the B-16? The B-16 kit I just built had a pre-assembled middle axle that appears to be the source of binding. Another issue I have is the driveshaft that connects the motor to the center axle came misshapened. I'll either have to heat it up to bend it which I am guessing will further wreck it or buy the metal upgrade.
@DirtyBob2001
@DirtyBob2001 4 жыл бұрын
Follow up: I came across your videos on the middle axle. I took out the axle, remove wheels just to further isolate variables, and twist middle in rear drives and found somewhere in between those two drives lie the binding. After tinkering I'm pretty sure I need to shim both drive shafts. I think the input gears are jamming into the differential ring gear. Now to find me some shims.
@RunThatRC
@RunThatRC 4 жыл бұрын
I was able to minimize the problem but not eliminate it. Shimming the gears and trimming the rear most driveshaft helps but the limiter tabs when broken (because they will just break off) causes some of the binding as well because the driveshaft angle. I don't even mess with it anymore. The center axle upgrade is where it's at for me.
@RunThatRC
@RunThatRC 4 жыл бұрын
yup that loaded center axle dosen't help either imo. Just too much load for the center axle ring gear having two pinions on it. The gearbox to center diff axle is worked hard as well.
@Sorelizard
@Sorelizard 5 жыл бұрын
Ordered a c-24 kit after getting burned on the c-34 never showing up ....lol. Are there any crucial upgrades you would recommend for the c-24 straight out the box ?
@RunThatRC
@RunThatRC 5 жыл бұрын
Depending on how tough your going to be on the little rig. I have the metal upgrade kit that comes with metal rind and pinion for the axles and metal driveshafts. That kit was about 33 bucks and I did get the 2 speed gearbox and that makes it crawl even better but not needed as much. The kit 180 motor and new gearbox do a good job and is surprisingly strong. Just dont run it when u notice a plastic driveshaft disconnects because that's how the trans gears get chipped when the driveshafts get caught up in the frame and u give it throttle then snap! But other than those my c24 is holding up find with those upgrades.
@haydenagnew7522
@haydenagnew7522 4 жыл бұрын
WPL fanatic much. I know you love them, but the whole series. LETS GO POWER RANGERS. Nah good job. What is the main difference between WPL and MN and which is your favorite. Also, when buying any WPL, would you recommend buying the kit as the better option.
@RunThatRC
@RunThatRC 4 жыл бұрын
I like the mn model land rovers and the with upgrades they are close to the WPLs. I like them both. For wpl I recommend kits specifically KM ones if you can get it.
@masonsrcadventures1745
@masonsrcadventures1745 4 жыл бұрын
i got a wpl for my birthday and the motor burnt out when i did a climbing test but im to dumb to freaking get a motor
@JAMESF655
@JAMESF655 Жыл бұрын
So I have about 10 of the wpl c24 I bought them all in RTR form because as soon as I got them I upgraded them with it as much metal parts and new electronics as possible not recommending RTR because kit is definitely better but if you're going to upgrade the immediately then I would just get the RTR
@RunThatRC
@RunThatRC Жыл бұрын
or you can get the KM kits that have the metal upgrades most buy and have a solid truck. Either way learning the truck in and out makes them fun in my opinion.
@policopaul7961
@policopaul7961 4 жыл бұрын
I have my c14 sine 1 week and it came with metal gears on diffs. And till now nothing brake. U have a list with upgrades that needs to be done?
@RunThatRC
@RunThatRC 4 жыл бұрын
You have a updated version with metal diff gears so I would say cvd driveshafts and 2speed of you have a multi channel transmitter. If you want the 2 speed and don't have a transmitter capable of it then you should look into the WPL V2 or V3 esc, receiver sound kit with light functionality and transmitter.
@mccafferty1234
@mccafferty1234 4 жыл бұрын
Have you tried tracks on the rc trucks?
@RunThatRC
@RunThatRC 4 жыл бұрын
Yes I have. The cheapy tracks you can get everywhere are not good in my opinion. They install only with the right axles unless you mod. And they bind and overheated my electronics. Also it makes the truck even slower. I made a video about a few videos back if you want to check out the video and peoples opinions on it in the comments
@HolyRC
@HolyRC 4 жыл бұрын
bro, are you have link for buy B24 ZH box, or it called KUNG or something, i want buy that.
@RunThatRC
@RunThatRC 4 жыл бұрын
Here is the link to the B24ZH: WPL B24zh RTR: www.banggood.com/custlink/KGmv9ranA2
@nealstavonincaly5084
@nealstavonincaly5084 4 жыл бұрын
People who hate on WPL or just salty😂 great video 👍✌️
@RunThatRC
@RunThatRC 4 жыл бұрын
People just have different expectations is all. To me they trail around great and provide me with tons of campsite entertainment! Appreciate the support!
@bushcrafter6416
@bushcrafter6416 4 жыл бұрын
Tried to help Hit all dem buttons
@garrykennedy5484
@garrykennedy5484 4 жыл бұрын
I can't seem to find your tire softening video. Link please????
@RunThatRC
@RunThatRC 4 жыл бұрын
I talk about it at around 10:20 on this video. kzfaq.info/get/bejne/j7qTrJqTud6rh5s.html
@islandboirc6398
@islandboirc6398 5 жыл бұрын
Did u preorder the new wpl C34 full metal version
@RunThatRC
@RunThatRC 5 жыл бұрын
I ordered both the regular kit and the metal version kit
@andyliping
@andyliping 4 жыл бұрын
Fayee has similar models. Which brand is the original? Which brand has better quality?
@RunThatRC
@RunThatRC 4 жыл бұрын
Wpl is the original and better imo
@thegreatreaper8840
@thegreatreaper8840 2 жыл бұрын
I had a C24 and a B36...both died in about a month....electronic board and engine. Both were RTR
@RunThatRC
@RunThatRC 2 жыл бұрын
RTRs now are better than original rtr versions but KM kits are my recommendation. They definitely don't give you the best electronics in rtr trim.
@thegreatreaper8840
@thegreatreaper8840 2 жыл бұрын
@@RunThatRC At leat now I have reason to rebuild them. Do you have any recomandations for motor and receiver/esc combo? Should I go for the RES v3 and 370 motor from WPL or should I go for something aftermarket?
@justagokarto4299
@justagokarto4299 4 жыл бұрын
Hey i hope you read this. I bot a wpl c14 and it came with metal gears in it
@RunThatRC
@RunThatRC 4 жыл бұрын
yes the newer versions now come with metal gears.
@donaldhenke2750
@donaldhenke2750 3 жыл бұрын
is their a trailer for that you con put a c24 on it?
@RunThatRC
@RunThatRC 3 жыл бұрын
probably can find one from the toy store or a Walmart that can work and be modded.
@islandboirc6398
@islandboirc6398 5 жыл бұрын
Question well u need ur own electronics for the all metal kit
@RunThatRC
@RunThatRC 5 жыл бұрын
Looks like you will need a esc and receiver and battery. It comes with a servo and a 370 motor for the metal kit. If you need a receiver/ transmitter wpl sells the proportional tx/rx for around 14 bucks and it comes with lights, 500mah batt, esc and controller.
@michaelhaddock1761
@michaelhaddock1761 2 жыл бұрын
How did you put the all steering on it
@RunThatRC
@RunThatRC 2 жыл бұрын
not sure what your referring to? If your referring to 4 wheel steering check out my wpl playlists I have videos on 4ws mod.
@mlkthegreat
@mlkthegreat 4 жыл бұрын
What color shud i paint my wpl c14(flat powder baby blue,army flat green, or flat white)! I dont know which to pick! pls give ur opinion!
@RunThatRC
@RunThatRC 4 жыл бұрын
I like the island truck baby blue look. but it's all about what you want out of it. have fun with it!
@crushingvanessa3277
@crushingvanessa3277 3 жыл бұрын
The blue and white was common on most Zil Russian trucks that were used by civilians. I forget what make this truck is, but it is accurate.
@martinwhitehurst9893
@martinwhitehurst9893 4 жыл бұрын
Hi, so I just start with the wpl and jjrc line. I may have a few question along the way if that is ok....... so i bought the jjrc q60 i think it is, and i upgraded everything. The leaf springs and shackles dont seem to work right, by that i mean i dont feel like the leaf spring holds the truck up right because the shackle is collapsed position. Next is the metal rim g and pinion... did you add oil or grease to yours? I did and it leaked out everywhere. I even made a gasket for them. Can you help?
@RunThatRC
@RunThatRC 4 жыл бұрын
I have no experience with the metal shackle and leaf spring upgrade parts unfortunately. But for the ring and pinion I use stuff called green grease. Its waterproof and it is very thick. Some of it will seep out but mostly it will stay in their.
@gamingn0ddles994
@gamingn0ddles994 3 жыл бұрын
im gettin mark rober vibes from that intro
@RunThatRC
@RunThatRC 3 жыл бұрын
Im not familiar with that person is he a youtuber?
@gamingn0ddles994
@gamingn0ddles994 3 жыл бұрын
@@RunThatRC yea search him up
@darwisy6569
@darwisy6569 2 жыл бұрын
Which one better ? MN99s or wpl c24-1?
@RunThatRC
@RunThatRC 2 жыл бұрын
out the box they are close with performance slightly better on the C24-1. I would choose the one you want most, modify it and have fun.
@chrispalpagan7495
@chrispalpagan7495 2 жыл бұрын
yo bro, whats the brand on that white dune buggy at your back?
@RunThatRC
@RunThatRC 2 жыл бұрын
Thats a feiyue FY-06. 6x6 12th scale buggy.
@chrispalpagan7495
@chrispalpagan7495 2 жыл бұрын
That first white rc bro? I think thats a 4x4
@RunThatRC
@RunThatRC 2 жыл бұрын
@@chrispalpagan7495 the one by my right shoulder is a 6x6 buggy but they make a 4x4 one too.
MN Model MN 96 overview and close look.
16:13
Run That RC
Рет қаралды 23 М.
WPL V3 sound kit comparison and demo.
20:38
Run That RC
Рет қаралды 25 М.
I Can't Believe We Did This...
00:38
Stokes Twins
Рет қаралды 90 МЛН
Vivaan  Tanya once again pranked Papa 🤣😇🤣
00:10
seema lamba
Рет қаралды 33 МЛН
WPL C24 Rc Crawler waterproof tips and tricks!
8:40
Run That RC
Рет қаралды 31 М.
You Call WPL Junk, but you are SO WRONG! Check these out!
6:11
WPL Комплекты Тюнинга Для 6х6. Задняя тележка - Все, что ты должен о ней знать!
32:30
Top RC / RC Обзоры, Тест-Драйвы, Тюнинг WPL
Рет қаралды 38 М.
WPL B Series more flex!
10:55
Run That RC
Рет қаралды 10 М.
e412: WPL b36-3 - Mods and Running! The "Buyer's Guide Series"
21:35
AMPRO Engineering
Рет қаралды 11 М.
WPL 2 speed gearbox and 370 motor tips and tricks.
12:16
Run That RC
Рет қаралды 66 М.
First Look At The Biggest WPL To Be Released!! WPL B36-3 Transporter.
23:39
e216: WPL 1/16 Scale Basics
13:41
AMPRO Engineering
Рет қаралды 52 М.
Upgrade Test! WPL C24-1 💪 UNSTOPPABLE!
11:42
The Higher You Crawl, The Further You'll Fall
Рет қаралды 18 М.
❗Он Застрял В Машине #shorts
0:22
ORNAUD
Рет қаралды 1,1 МЛН
😱 Секретная фишка складных велосипедов!
0:36
Тот самый Денчик
Рет қаралды 385 М.
Пружинный ДВИГАТЕЛЬ? РАБОТАЕТ!? #секрет #энерголикбез
0:27
Efficiency is key 🔑 - 🎥: @engineer_constructions  #asphaltpaving #asphaltpavement #construction
0:12
PavePro Asphalt Solvent and Release Agent
Рет қаралды 5 МЛН
Что делать, если отказали тормоза?
0:12