8:15 "Got my Fire extinguishers ready" 13:32 *Grabs a Shovel*...

“Ok I have my fire extinguisher ready” “ THE GENESIS IS ON FIRE!” *hits with shovel*

How to deal with a burning drill. Step one: Smack it with a shovel. Step two: Throw it with a shovel. Step three: Bury it.

That Genesis drill was actually pretty impressive for $32. I wish he would’ve mentioned whether they had lithium or nickel metal hydride batteries.

Haha that's last drop and sarcastic " I know how to take the battery out on this one" really cracked me up

You know the drill.

11:18 "the hi-poi... Uh hi-spec is uhh" Dude just called it the Hi-point of drills lmao. Savage.

Watching him choke on burning drill fumes is the most premium content I've seen in a minute

"i have my fire extinguisher ready" -drill is on fire -runs to a barn getting a shovel

Welcome to wranglerstar where saftey is number 99 priority.

"We know how to get the battery out of this one." *DROPS*

"I wonder if some of it's high specifications have come loose" LOL

"It under-performed in catching fire." That made my day.

10:40 hi spec quit smoking, but genesis started vaping xD

Why is this so damn entertaining?

Well, in all honesty, I had a cheap drill and used it for years. Never had a problem with it. Sure, it wasn't very powerful and overheated quite fast, but if you know that, and work around these problems, these drills will last quite some years.

Thunderdome: Two drills enter; one drill leaves.

why i am watching this at 1 am when i have class tomorrow morning

"Does everything bad, including dying" Ultimate insult right there. I might put a derivative of that in my roasting toolbox.

“good grief these things are dangerous” he says after drilling them together for the past 3 or 4 minutes

13:33 I'm rolling on the floor laughing

"He did everything wrong, including dying" 😂😂😂

When you started dismantling them with a pocket knife, before even starting any tests, I knew things were already going south fast! 😂

13:32 genesis:"why are we still here?just to suffer?everyday,i can't feel my legs,even my fingers."

Stihl vs. Husqavarna chainsaw torture test?

Why am I more interested in this "fight" than the mcgregor mayweather fight lol

“It just kinda did everything badly including dying” 😂😂

You know, you kinda gave the Hi-Spec another cooling vent, maybe that's why it won 🤷🏽‍♂️

" I know how to get the battery out of this one" had me in stitches. .. one new sub

You seem to have a problem with ryobi so why don't you test them on the channel to see if they are as bad as you think

I learned something. That if you gonna buy the cheapest drill, it might be weak, it might be ugly and it might be bad but no matter the hate you will give it its still there to work

"Is that related to Hi-Point?" lol

It's my knife and I can do what I want with it.

Is this a youtube channel for dads?

"i wonder if its related to the hipoint" lmfao i love this guy for that

Lessons learned: never leave the battery in a broken device!

Genesis for Pve Hi spec for Pvp

that fire was the best part of the whole video

My teacher, did you do your homework? Me at home: 13:34

"I wonder if that's related to the hi point" I nearly died man!

Lol they touched tips

I was laughing so hard “THE GENESIS IS ON FIRE **grabs shovel** *BOOM* I SHOULDVE TAKEN THE BATTERY OUT”

13:08 lmao that pause

There is a brand on Amazon called Prostormer. It looks like a decent brand, and the price points aren't super cheap, but definitely not expansive by any means. I have long thought about ordering them, but I wold love to see a review of some of their tools. They have an impact wrench, an impact drill, a smaller impact ratchet wrench, a regular drill, an angle grinder, and a circular saw. They all run off 20v batteries except for the ratchet wrench which is a removable 12v, and they are a mix of 4.0 amp 20v and 2.0 am 20v. Again, they look pretty decent, but I would love to see your review. Thanks brother!

Next you should test amazons cheapest chainsaw or jack

7:54 *"That has a light"*

“I wonder if it is related to high point?” That was too funny

9:31 *"UGH HOW MUCH MORE ABUSE CAN* MY LUNGS *TAKE"*

Oh, thats where payday gang buys their drills from

13:51 (Good grief those things are dangerous!) After he did everything to them that you're not supposed to LMFAO!

Your videos are incredibly entertaining. You have a very natural camera presence. Glad to see some genuine entertainment on KZfaq.

Best line... "I know how to get the battery out of this one!" drop Hahaha

13:31 YOU PICKED THE WRONG BARN FOOL!

The Hi-Speck isn't so high anymore bc it quit smoking

Yesterday people dropped mics but that is now a thing of the past, todaywe drop the drill LIKE A REAL MAN

Okay I lost it laughing when he hit that shit with the shovel 😂😂 13:25 I swear I thought the fire extinguisher was nearby my ass it was!

Haven't seen the video yet but going to make a bet that these are both better than the cordless drills at harbor freight. Also how dare you bash on ryobi, i had a $70(drill only, no battery) ryobi cordless hammer drill that i used for 3 years contracting, drilling holes in virtually everything you can imagine, wore out probably half a dozen bosch bluegranite masonry bits driling into tile and concrete walls for anchors and wall penetrations, shooting thousands of drywall screws and anchor screws, working in the rain, dropped off of ladders, and still using it around the garage. The only other drill i used was a big milwaukee if i needed to drill 1" wall penetrations through poured block concrete for larger cables. The guy i was subcontracting for and his other 2 subcontractors all used the same drill with similar results. Some of their products are hit or miss, but many are great.

When I saw this video I was like, hmm I reckon I could get one cheaper so I went on to amazon and found one for $1.96 when it arrived it turned out to be a key ring....

Ok this video was actually hilarious I mean 14:00 “I know how to get the battery out of this one” and drops it lol

“It’s my knife, I can do whatever I want to with it” damn straight

"I know how to get the battery out of this one" Killed me haha

You got me when you said I know how to take the battery out of this one and then dropped it

“Is it going to be a fire” Said while holding with bare hands

love your method for avoiding fire on the orange one... "we know how to remove the battery from this one" SLAM! hahahahahaha

Testing the Cheapest Chainsaws on Amazon? Most of the cheap models come with starter kits including chains, gloves and tooling. You could compare all that stuff to the higher end brands. Maybe do a test to see which one fells a tree or cuts firewood easier or faster? These are really fun videos but maybe you should also make recommendations on how to improve or make the cheaper products better and last longer?

i would imagine that the magnetic "bit holder" is actually a magnetic nail/screw holder. at least, that's what i'd use it for

*stabs someone with a knife* “It’s my knife I can do what I want with it”

My personal recommendation of budget drill will be the DCA/Dongcheng, thought they only make 12V, 14.4V and 24V(hammer/impact drill) models. The 14.4V model i bought from the direct distributor is around 40$ (comes with one spare battery, charger of course, a compact storage box and a complimentary bit set). The feeling resembles the Bosch 18V model and the battery is very durable. When something break, the replacement parts are only 0.5$~10$(battery/motor), with the selection so wide you can build a new one out of the parts individually.

i dont use drills why am i watching this

gennesis does what hi spec don't

It’s 2:40 am and I’m up watching a video about drills and I’m entertained 😂😂

Best cordless drill I have ever had (and still use to this day ) is the Hyper tough from Wal-mart. $20, I have 2 and use them daily for work. I do maintenance and remodeling. They have out performed and outlasted any other drill I have used including my old craftsman.

8:18

"The genesis is making an audible sound" Isn't that what sound is?!

When you smacked the genesis with the shovel I cracked up 😂

I just wanna say, thank you for inhaling dangerous fumes and smoke to bring us this video. Any time you could’ve stopped and grabbed a respirator or fan but didn’t cause you knew it wouldn’t be consistent and wouldn’t be a true test for you fans. Again. Thank you.

Cheapest car jack, chainsaw, circular saw,

I thought Ryobi was a pretty good brand, I've got 2 impact drivers 2 cordless similar to the one in the video and a battery circular saw and I use them pretty heavily and they work beautifully in my opinion anyways haha

Lol! "It's my knife...." just as I finished thinking, "That's not a pry bar."

I don't know why you keep ending up in my recommended list, but I could watch you talk about paint drying for 30 minutes. I'm subbing this channel.

We learned to buy dewalts, Milwaukees and makitas

Never in a million years would I have thought to connect two drills and let them run until one dies, and never in a million years was I expecting to be watching at 2 am (or at any time for that matter)...... yet here I am. It's 1:56am and I am watching this video and it was actually quite enjoyable. Thanks for the vid! I like your humor and care free style. I hope you have others like this one (I'll check the rest out when I wake up) because if so you just got yourself another subscriber :)

Never used a drill in my life but still watched the full video good job at entertaining viewers and great content

The high point.... I mean the hi spec stopped smoking. Lmfao

you should test some handguns like this..barrel to barrel then just keep pulling the trigger....haha

13:50 Good Grief! "These things" are dangerous! :D I don't think that was their primary purpose! lol

How to disconnect a drill battery: Step one: grab the drill and hold it at 6 feet Step two: drop it! Step three: be made because you broke you dads drill

I have the GENESIS HEAT GUN and it works GREAT! It was around $10, comes with attachments and gets red hot very fast.

8:19 repeat it again and again and you will laugh

I wanted to see the Genesis' case.

"Which one is going to die first?" Probably the one holding the two smoking drills! haha

Gotta love how he used 2 hands on the gen and ran it for twice the time as well as came in and out with it properly and didn't do any of this on the spec

my school has the hi spec one it makes woodshop class hell

since i would never consider either drill this video was for entertainment purposes only, which it did very well. i see you have other similar test, i will check them out.

Maybe the cap on the -Hi Point- Hi-Spec was a Picatiny rail ?

Cody, you ARE the boss at these videos! Love them 💙 Thank you!

try the same test with an expensive drills

ok so far at 5:55 the first thing I noticed is that the Hi-Spec was drilled so close to the knot in the board and the genesis was about 4 inches away....be fair bro

Had a Genesis drill as a cheap backup. Worked alright but was quite heavy. Now I have a drill driver and impact driver from both DeWalt and rigid. Both are incredible in comparison.