XB Intake manifold and Injectors.MOV
Рет қаралды 10,558
14 жыл бұрынCheck out my website at www.streetfighterperformance.com!!
A look at the XB intake manifold and components I am using for the turbo setup.
@loris199 14 жыл бұрын
can't wait to watch some new videos mate.... good job! cheers from Italy Loris
@Centrikk 13 жыл бұрын
If im not wrong here you are laying the turbo under the engine were the original exost would have been ! Im lookin forward to see how this will turn out ! looks perfect !
@Timmafod 13 жыл бұрын
What turbo is that?
@thra5herxb12s 13 жыл бұрын
Semen injectors???
@Corpse1984 6 жыл бұрын
How far we're you able to push the stock injectors before you got the new ones? Also, which injectors are those semens ones?
@ezracing900 6 жыл бұрын
Stock injectors are right at 29 lb/hr @ 50psi, so I can only push them as far as anyone else....~110whp at stock 6800 rpm redline. Seimens Deka V injectors are available in 60 & 80 lb/hr....you only need as much injector as you need...no benefit in installing something bigger "just to have"
@johanlambrechts9602 6 жыл бұрын
Your stock injectors are already running at their peak without any mods. they are 30lb/hr and if you put that into a HP calculator you will see you barely reaches the HP claims of Buell for the XB.
@seandrummond7476 4 жыл бұрын
Would it hurt you to have the next size up injectors, need is one thing but does it damage anything in particular?
Jason Derulo
Рет қаралды 98 МЛН
How 2 Wrench
Рет қаралды 158 М.
driving 4 answers
Рет қаралды 1,4 МЛН
Black Sea Trails | Zakhar Vernichenko | BikeLevel
Рет қаралды 901 М.
MotoBear🐻
Рет қаралды 2,1 МЛН
Zulfiqar Ali 1
Рет қаралды 31 МЛН
SarafannoeTV
Рет қаралды 8 МЛН