Xbox 360s Model 1439 Refurbish - complete teardown, clean, new thermal paste and reassembly

No video

Xbox 360s Model 1439 Refurbish - complete teardown, clean, new thermal paste and reassembly

Рет қаралды 22,043

WildSamsquanch7

Күн бұрын

Пікірлер: 45

@candyrainkisses1990 Жыл бұрын

Extremely helpful! Thank you for sharing your wisdom, Sensei 🙏. Im a mom of two on a budget and I DID IT thanks to your video! (Had to replace the disc-drive. )

@Wildsamsquanch7 Жыл бұрын

This comment makes my day! So happy you successfully tackled the repair and that the video helped. 😁

@BeansInferno 5 ай бұрын

Dude! The moment of truth, should've done a play test 😅. Great stuff on the assembly/reassembly. My 360 slim is due for a new thermal past. Opened it up last week and gave it a good cleaning. My Isopropyl and thermal paste arrived today. You've got a good flow for instructions.

@Wildsamsquanch7 3 ай бұрын

Thanks for the kind words!

@tadpolegaming4510 Ай бұрын

Good guide, better than any of the others I clicked on, even though mine has a different model disc drive.

@meelispuvi8541 Жыл бұрын

Thank you! This will be saved for the future,

@Wildsamsquanch7 Жыл бұрын

Of course!

@tenminutetokyo2643 10 ай бұрын

Jam in an internal green LED near the fan vent.

@mohamedb.2064 Жыл бұрын

Great, well explained 👍🏼

@StabTheDabb 7 ай бұрын

I did my refurbishment on New Year eve. The thing was, my Xbox didn’t have the X brace holding in the heatsink. Instead it was held in with Flathead screws and several delrin and stainless steel washers attached it both screws and underside of the Heatsink (I bought my 360 years ago from a pawn shop after my original got damaged in a move). Cleaning was a PAIN as the previous paste was completely dried and required a lot of rubbing alcohol on both the CPU, and Heatsink to be removed. I used Protronix Series 7 for my Thermal paste of choice. The Console runs fine now Thanks to your tutorial, albeit the Heatsink was Installed differently from the factory Specs.

@ineedandrenaline 6 ай бұрын

Sounds like the infamous bolt mod.

@StabTheDabb 6 ай бұрын

@@ineedandrenaline It was a pain to reattach

@ineedandrenaline 6 ай бұрын

@@StabTheDabb I think I'll have to replace my thermal paste sooner or later. Although my Slim is pretty quiet, I know nothing lasts forever.

@StabTheDabb 6 ай бұрын

@@ineedandrenaline Use Silver Paste

@absolutezero6423 Жыл бұрын

What size were the hex bits used to turn the screws? I wish I knew about the tricks to unlock some of those hidden clips throughout this puzzle box before I tried to disassemble it. Thanks for showing me the right way to do it. It's too late for this slim but I won't destroy the next one now lol.

@BeeWaifu Жыл бұрын

T8 and T10

@absolutezero6423 Жыл бұрын

@@BeeWaifu THank you. If you are off by one size they will strip out instantly lol.

@tomgray7049 5 ай бұрын

Thank You. I have a 1349 motherboard. However I dont have that little daughtercard in it. What is it and where can I get it?

@tomgray7049 5 ай бұрын

@@mynameisNarsil right. That's my had size. How do I get one?

@hdgamers1291 3 ай бұрын

What is the best thermal paste for xbox 360 is it MX-4 please answer my friend❤

@Wildsamsquanch7 3 ай бұрын

I always use Arctic MX-4. That said, you asked "What is the best thermal paste". You could probably ask 10 people this question as well as how much to use and you would likely get 10 different answers. I have had success w/ MX-4 so that's what I use. I appreciate your support!

@BeeWaifu Жыл бұрын

I did what you did with your disc drive, and now the laser doesn't move. I didn't touch anything but the laser (to clean) and lubes up everything.

@Wildsamsquanch7 Жыл бұрын

I would go back through and check that all of your ribbon cables and connections are secure.

@BeeWaifu Жыл бұрын

@@Wildsamsquanch7 I figured out what the issue was. I was tightening the case too much, so the rotating magnet above couldn't move. Figured something was wrong when I kept the reader open and the laser moved and the disc spun.

@Wildsamsquanch7 Жыл бұрын

@@BeeWaifu Awesome! Happy to hear you solved the problem!!!

@tadpolegaming4510 Ай бұрын

@@BeeWaifunoted, I'll loosen mine a bit

@xperia7065 Жыл бұрын

Great video thank you

@Wildsamsquanch7 Жыл бұрын

Thank you!

@ItsRex_YT 4 ай бұрын

Does this fix the RDOD/RROD?

@Wildsamsquanch7 4 ай бұрын

It doesn't fix the RROD. That's a much more complex process that I don't have the skill nor the tools to do unfortunately.

@ItsRex_YT 4 ай бұрын

@@Wildsamsquanch7 First off, thank you so much for replying! Seond off, if possible can you make a video if you get the tools and develop the skills, either way thank you so much !

@andersongomes7105 Жыл бұрын

is this model with jasper motherboard or not? thank you if you reply.

@CasualGameDev Жыл бұрын

I second this question! I have a 1439 model with what appears to be a broken MU(not saving correctly, updates not working regardless of having external storage), and I'm wondering if I am able to remove the internal MU completely to resolve this?

@CasualGameDev Жыл бұрын

Update: I removed the side just like the first step in the tutorial, if you shine a flashlight in you will either see that there is a seperate PCB sticking up(like the video) or it will be soldered. Luckily in my case, it was a seperate board, so tomorrow I will take apart and remove the MU. I will update on how this goes, hopefully this helps you man

@eyelesscrown7346 10 ай бұрын

No this would not be a jasper. Those were only in the previous 360 models