Xbox One Original Power Supply Repair

Рет қаралды 18,814

3 жыл бұрын

Trouble shooting and repair of a A original Xbox One power supply brick. Hey I enjoy repairing electronics as a hobby, and decided to video some of them to hopefully help other people repair things too.
Disclaimer: I am not a professional, everything you do is at your own risk.

Пікірлер: 32

@emlliknikcuf5556 3 жыл бұрын

What can I do if mine is co mlm completely red? It's a 3rd party brand called Ponkor. It fell once today and it's been red ever since

@nehinelson2542 3 жыл бұрын

What would you think could cause the issue if the light goes out just by plugging it into the console? It’s orange once plugged to the wall, but as soon as the cable plugs into Xbox, the light goes out before hitting power. Same thing on 2 different xboxes and other supply works fine so not a short in the console.

@G0H1LK4M 3 жыл бұрын

That is most likely bulged capacitors inside the power brick, it would mean they're shorted out. For that you'd have to open the power supply. If you're going to do that, make sure you look up various videos before doing it. You'll want to leave it unplugged for like 20 minutes before opening it so you don't get shocked by a capacitor discharging.

@mariexo 2 жыл бұрын

My screws are on entirely too tight. Is there any way to get it off?

@UceFPS 2 жыл бұрын

I have an adjustable soldering iron that's 110v 60w, what temp do I need to have it at to set it to remove the metal heat shield to get to the bottom board and also the temp to solder at? Thank for the video

@Crazylogix007 2 жыл бұрын

300C or 575F is a good starting point. You will need to ajust depending on how fast your iron can recover heat.

@javiles2331 2 жыл бұрын

I have the same issue but I still have that orange light… I replaced the same capacitors

@gregbeil3916 3 жыл бұрын

Thanks for the detailed video. What was that adhesive you applied to the caps?

@Crazylogix007 3 жыл бұрын

E6000, find it at hobby and craft stores, Walmart, and online.

@casenfranco1769 2 жыл бұрын

You all prolly dont care but does someone know of a tool to get back into an instagram account..? I somehow forgot the login password. I would love any tips you can offer me.

@robertsincere3964 2 жыл бұрын

@Casen Franco instablaster =)

@casenfranco1769 2 жыл бұрын

@Robert Sincere I really appreciate your reply. I got to the site on google and Im trying it out atm. Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.

@casenfranco1769 2 жыл бұрын

@Robert Sincere It did the trick and I now got access to my account again. Im so happy:D Thanks so much you saved my account :D

@wryguy 3 жыл бұрын

Had the same problem and replaced the capacitors. Orange light still turns off when I short the connector. Did I do the capacitors wrong or is there something else I should test? Thanks!

@Crazylogix007 3 жыл бұрын

Its should go to white light.

@wryguy 3 жыл бұрын

@@Crazylogix007 yes I know, but it's staying orange after replacing the capacitors. What should I check next? Totally possible I didn't install the capacitors properly...very amateur electrician here

@luisdominguez4550 3 жыл бұрын

Tengo el mismo problema y no encontré capacitores de 16v y utilizó 25v 2200uf pero sigue sin funcionar alguna idea 💡?

@DonVerchi700as 3 жыл бұрын

Si yo tengo una!

@gr3333dy1 3 жыл бұрын

Thanx cool video , add another angle (table view) cam on table . But very informative thanx again

@Crazylogix007 3 жыл бұрын

Noted! I am working on better cameras and microphones, its a slow process.

@CowboyUp1991100 2 жыл бұрын

Can you give a link or website where you got your capacitors

@Crazylogix007 2 жыл бұрын

Mouser and digikey are good suppliers.

@CowboyUp1991100 2 жыл бұрын

@@Crazylogix007 thank you very much

@strictlyamps820 3 жыл бұрын

See you finally got you a de-soldering pump, nice. A quick tip for those, DON'T use flux and then suck anything up.... if so you will be taking it apart and cleaning the diaphragm. Just saying. Nice video, SMPS can be a devil sometimes.

@strictlyamps820 3 жыл бұрын

Oh yeah, meant to say also you can solder with the de-soldering pump also, just saying

@Crazylogix007 3 жыл бұрын

Good to know, thanks!

@diegocarlos5986 Жыл бұрын

hello everyone, very good video, I have exactly the same problem, those three inflated capacitors at the output, I changed them for new ones with the same values and when I connected the source back to the Xbox smoke came out, but something very curious happened! !!, now only one capacitor that I changed has burst, my question is, what could have caused this???, why now only one has burst??, the polarities are correct and it does not touch any solder, nor are there traces of tin, I have already tried and measured everything and I can't find the problem, according to what I read out there, it could be an optocoupler in poor condition, could it be??? And what causes the three capacitors in that part to inflate???, anyway, I would appreciate your help or that of the people subscribed to this channel, thanks in advance and greetings from Argentina.....