XJ Rear Tire Carrier Install

XJ Rear Tire Carrier Install - JcrOffroad

Рет қаралды 463,091

Күн бұрын

In this video I'll show you how to install the XJ rear tire carrier from JcrOffroad. This thing will hold a spare tire, a hi-lift jack, 2 rotopax cans, a CB antennae, and your license plate w/ light. Pretty sweet!
Watch the Entire "Hope Floats" Build Playlist from Day 1: bit.ly/1oJBIe6
Website: www.bleepinjeep.com
FaceBook: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Пікірлер: 328

@albertosotelo9969 11 ай бұрын

Those tires are no joke!!! I thought you were kidding, I can't imagine how difficult it would be changing a tire on one's own!, looks amazing, someday I wish I can do that to my XJ

@aidanmakinster922 4 жыл бұрын

This is much better thought out than some others ones I've seen. I really like the small thoughtful details incorporated into it.

@wadehiers 4 жыл бұрын

It's hard to tell since I'm watching on my phone.. but I think you put the seal in backwards.. it looked like the lip (with spring) was facing out.

@gateway8833 7 жыл бұрын

I have got to admit I have never seen anyone bet their bearings so proficiently. When we filled bearings we used a sweeping motion, I think I like your method better, looks like it gets the job done much faster.

@briansmobile1 9 жыл бұрын

That unit looks SHARP! I like it!

@mfcj09 8 жыл бұрын

I love your channel I just bought a 1991 and your jeep is the inspiration for how I want to build my jeep! thank you for your channel and great feed!

@otmtex 9 жыл бұрын

Great vid, I used coiled wire for my license plate lamp and 3rd brake lamp on my TJ, helps with the swing out.

@deadkemper 9 жыл бұрын

That looks so well made and expensive. Great vid

@geipelstoys9923 9 жыл бұрын

I worked in the shipping department at JCR for a little while. those tire carriers were fun to box up lol

@bleepinjeep 9 жыл бұрын

tyler geipel everything comes in rectangular boxes now with foam.

@geipelstoys9923 9 жыл бұрын

yep, spraying that foam in the boxes got interesting at times lol

@jbossnack 9 жыл бұрын

God bless your mailman! Nice install. Looks solidly built.

@ManMak6 6 жыл бұрын

The color of your Jeep is just awesome!

@garagezu 6 жыл бұрын

This is the best project I've seen so far. Great job

@latamirlaroux3632 8 жыл бұрын

Before installing the spindle to the bumper you can use it to set the lower bearing.

@dreamgaming1758 4 жыл бұрын

I drilled holes and add grease nipple in my tire carrier so I can top up my grease

@haymakerish 6 жыл бұрын

I have to say that I really enjoy your videos. Just bought a 98 zj. Hoping to build an overland out of it.

@syzfilms 9 жыл бұрын

Enjoy your stuff Matt. Good Job of showing your work in a fun way.

@stevenator117 5 жыл бұрын

This would definitely be worth the time to do I have an 01 Cherokee with no rust whatsoever on the body

@montimitchellsr 6 жыл бұрын

I’m a land cruiser owner and I enjoy your videos Thanks. M

@jamesdoe5824 9 жыл бұрын

That is a sick rear bumper kit. Wow I need this for my xj

@pwagner0148 9 жыл бұрын

Love the mail man helping lift the tire Lol

@zombiecop77 5 жыл бұрын

Damn man...I let my son watch this & ur on the screen greasing up and slappin that bearing.

@mathewmyers8252 7 жыл бұрын

love the set up

@nicderemer1 9 жыл бұрын

Those birds chirping are so peaceful

@MrGigaHurtz 7 жыл бұрын

Bleepinjeep could you do another video on a different rear tire carrier? This is an awesome video, I love to see it w a different tire carrier. The JCR is cool but @ $1800 (after you add the powdercoat and brackets for rotopack+jack) it is crazy expensive. Think of all the other things you could do w/ that $$$$. Are there any other rear tire carriers you'd recommend?

@benjamintresham9649 8 жыл бұрын

This is a great looking carrier BleepingJeep. Very good design. Is the latch a two stage catch?. Just like a car door type. I don't want to be picky but I think you have installed the grease seal upside down. That thin section of rubber that stands up that you faced down is meant to rub on a flat surface on the stub axle and seal out dirt/sand. If you look at the steel section of the seal, look at the end you are hitting with the punch carefully you will notice it has a chamfer. This makes starting or inserting the seal into the housing easy. Trailer axel seal it is and they are fitted this way. Also grease the seal's lips before fitting on to the stub shaft or axel. The main lip is the one with the small tension spring on the inside of it. The way you fitted it this spring is now exposed to the weather or elements. Springs are only on good quality seals. I like all the work you do on the Jeeps. It's good to see someone having a go.

@swimmer8585 7 жыл бұрын

3:19 the neighbors are gonna think I'll be doing something else lol

@theronellis1514 4 жыл бұрын

lmao

@trailblazer4256 7 жыл бұрын

I wish they'd make some of this stuff for my 4Runner!

@michaelboyle4119 2 жыл бұрын

Looks awesome . Nice job .

@3fff 6 жыл бұрын

Nice work 👍 With my best regards From RIYADH Capitol of SAUDI ARABIA

@sergkaizen5342 9 жыл бұрын

Nice design wish they made similar unit for jk

@retiredppd 9 жыл бұрын

I have never saw anyone pack a wheel bearing like that. It gave me a good laugh.

@xxRamD3yruxx 9 жыл бұрын

retiredppd I thought you push it in from your palm, not pat it in

@robertwebber2107 6 жыл бұрын

You have to admit that it did work though.

@moose2934 5 жыл бұрын

Easily the most R-rated BleepinJeep video out there

@mustang7288 5 жыл бұрын

retiredppd That’s actually how you packet dumbass

@sleepy6636 5 жыл бұрын

Sounds like Rudy is an expert in packing

@joshsquire555 9 жыл бұрын

I screwed up and bought the OR FAB Cut n Fold rear bumper. It's a great bumper, but I want a tire carrier, so I can use the back for more camping gear.. Gonna have to make a custom hitch carrier now..

@mikebarto1743 9 жыл бұрын

Great video! I have that bumper and carrier & i love it! Very well built & it looks great

@officialWWM Жыл бұрын

This video is 7 years old and this is still one of the best looking tyre carriers on the market. The only thing I don’t like is that it blocks the indicators a bit.

@garagezu 6 жыл бұрын

Great job, like it.

@gothickami 9 жыл бұрын

I need this for my zj!!!

@pinay56 6 жыл бұрын

When I was in the Army years ago, we used to pack wheel bearings by taking a large glob of grease; then holding the new bearing in one hand, force the clean bearing into the grease, while moving it around in a circle. Then once you finished you would wipe off the extra grease, or just push the greased bearing into the wheel......

@ajmorgan5940 3 жыл бұрын

Very cool.

@doalex2085 3 жыл бұрын

Very nice I subscribe cause my pore 96 Jeep is parked bad knocking. Going to put new motor in soon. And want to fix it up thanks for your help

@yotasteve3646 9 жыл бұрын

Did anyone else notice that this tire carrier entirely blocks BOTH reverse lights?

@Keith1212 7 жыл бұрын

Yes lmao! Jeeps have never been much about safety.

@aznes004 7 жыл бұрын

The bumper has cutouts for LED lighting

@markyboi79 7 жыл бұрын

Real men don't ever need to go backwards!

@zzz7zzz9 6 жыл бұрын

who are reverse lights for anyway?

@zzz7zzz9 6 жыл бұрын

dumber is that it completely covers the license plate. I have never liked a swing-away tire carrier. I like having sight out my rear window. I carry my spare on my roof rack, plus there, it's weight is evenly distributed on the vehicle.

@redscustoms1130 6 жыл бұрын

love his videos how could I get some bleeping jeep stuff

@GotrekGurninsson 7 жыл бұрын

Should add a grease fitting to the hinge so you can grease it without taking it all apart again.

@wsgregory 5 жыл бұрын

Well as fan and an xj owner myself with long arm / Travel custom built by me and a 4-link coil spring upgrade instead of Leaf springs this tire carrier is much too heavy and then to having to hang a oversized 32x12.50 x 15 tire and wheel on it will overtake the enjoyed spring rates the owner enjoyed prior to install. They fail to mention this and how expensive the alternatives to buying extra spring for both leaf springs or coils, to compensate. This is an upgrade that would be wise at time of build. It’s is HIGHLY recommended

@MyAlexVideos 8 жыл бұрын

im watching your videos in my xj.....i think i love my jeep yo much lol

@SLWilliams 6 жыл бұрын

Wow kiero uno para xj👍👍

@franciscomontesdeoca5316 2 жыл бұрын

Super video

@rider.gibson 8 жыл бұрын

Very nice

@MrCard031584 7 жыл бұрын

bearing race driver set from harbor freight for about $15-20 bucks would help tremendously in setting that seal...

@MrCard031584 7 жыл бұрын

also a bearing packer for about the same price...

@wsgregory 5 жыл бұрын

Derik Card if you require only one use IF your very careful, from the Harbor freight bearing and race drivers, when if you are willing to spend just a little more an American made set by any manufacturer would be the better and safer advice. They will tend to out last their owner and the next owner. Hoping no one took your advice and bought the Chinese version im sure they are missing a finger or hand or something. I try never to recommend Chinese junk. It’s dangerous. I know this is an old post, but one day it’s likely to come back to bite you, referring harbor freight hand tools. Not sure why we even let them off the ship. It’s not worthy of the name tool.

@caparzzo 9 жыл бұрын

i'm watching your videos, and i don't even have an XJ, one day i will.

@javiroo1743 9 жыл бұрын

same here.. don't hurt to dream wright?

@josepttellez5662 8 жыл бұрын

+javier hernandez yup I hear the 1999 had the best engine

@Transphoenixbiker 8 жыл бұрын

+Jose Pt Tellez nope nope nope....98 is the last good year after that they have block cracking issues.

@adamswaz4878 7 жыл бұрын

Not block cracking , 0331 stamped heads have head cracking issues

@laqutis1119 7 жыл бұрын

bentovergarage Wrong

@ashelarry1184 4 жыл бұрын

Good video, thanks man 🍻

@user-nz9lz1zm2z 5 жыл бұрын

very good!

@yjmoneypit 9 жыл бұрын

how many times did u put that part on loosely

@donaldgonzalez4285 4 жыл бұрын

very very nice bro...

@Moatazosaleh 7 жыл бұрын

very good

@gibbethoskins8621 8 жыл бұрын

That looks awesome, shit load of weight on the rear suspension though, combined with that rear bar

@HeRcUlEs782 5 жыл бұрын

Nice jeep!

@Halsafe 7 жыл бұрын

I want an xj now

@adamg7270 5 жыл бұрын

That seal is upside down....

@CJLane-62 Жыл бұрын

I like that, wonder if its still available 7 years later,wouldn't mind having 1 made from aircraft grade aluminum, but would angle it outward at the 2 ends so tire and rack has a bit more space tween it and the back of the XJ rear hatch!😏

@yamilehtrivera3935 5 жыл бұрын

Está excelente,es solo para Jeep

@yandriarce2439 9 жыл бұрын

Maybe they'll smarten up and make the carrier out of aluminum light and strong

@23Boarder10 7 жыл бұрын

Where did you get the XJ painted? Looks like a pretty good paint job.

@CharlesWillisBonsai 5 жыл бұрын

I was waiting on you to put the spare on a jack to get it up to the carrier.

@onwheels8232 5 жыл бұрын

14:00 take out the air. It's gonne be lighter 😂

@1991zakman 4 жыл бұрын

add some helium

@BluePatch-pc7sx 9 жыл бұрын

Sweet, bro

@stevencallaway3777 4 жыл бұрын

I sure would like to purchase just the latch assembly and the locking pin assembly for a custom project I'm working on

@macp91 9 жыл бұрын

Hey does any one know the name of those wheels love the look plus nice video!! Thanks

@w1.0 4 жыл бұрын

Seal upside down flat metal part always faces out now you have to take it back off n fix it!!!🤣

@TundraVic 4 жыл бұрын

Lip seals always face the bearing! Really won’t matter on this particular application...😂

@trucavalier 8 жыл бұрын

sweet

@danielpritchett3896 8 жыл бұрын

does anybody know if the bumper and tire carrier in this video will work on a mj

@tallmanmike6436 7 жыл бұрын

I enjoyed this video, I like build videos in general, but I have a question: What happens if you get a flat tire when you're out in the boonies? Getting the spare off the carrier isn't too much of a problem if you're careful, but how do you get the flat tire back onto the carrier? Do they make a small winch for it? We aren't all muscle men.

@SuperDad1776 Жыл бұрын

Use a ratchet strap off your roof rack rails to lift it up or run a board to the bumper roll it up an pivot onto the mount but honestly just don’t go out alone would be best practice

@that__one__guy5405 6 жыл бұрын

Great videos so far! What kind of bumper do you have on the rear that you mounted the swing arm to? Thanks!

@dirtysouthtv2209 4 жыл бұрын

JCR Off-Road rear bumper and rear bumper accessories. Then there are the rotopax, the high lift jack and the license plate relocation bracket.

@jaxonmarkey9081 4 жыл бұрын

Mom-“what are you watching?!?” Me-“How to pack grease”

@josephp8712 7 жыл бұрын

good vid brochacho

@phuckyewgewgle 6 жыл бұрын

id like to see most people try to lift a 35 with wheel. not to mention generals weigh three times a normal tire...

@hopefloats7573 5 жыл бұрын

tom Placentia The General tire with the Raceline wheel weighs 92lbs.

@carloscubillosc 6 ай бұрын

Hello, thank you for your video, it is very detailed. I've been looking for that rear bumper for a while, do you know if I can buy it somewhere?

@wuttmodel3232 2 жыл бұрын

Good idia sir

@luisdesantiago7286 8 жыл бұрын

Love the bumper and the carrier! I am deciding between the xrc and this one. Whats the wheels brand / make?

@CarlosRivera-oe1zr 8 жыл бұрын

feet women

@garyking262 8 жыл бұрын

I did use a pitman arm puller and still won't budge

@paulalabe18 7 жыл бұрын

I've been looking for something JUST like this, but for the WJ Grand Cherokee. Got any links to one? I won't how hard it would be to modify one of these to work with a WJ?

@PhilipGragg 8 жыл бұрын

gotta tighten up that bumper.. or weld it on... when you lifted the tire carrier, you could see the bumper bending from the jeep

@PhilipGragg 8 жыл бұрын

azzkicker1337 well, maybe with some body stiffeners...

@bladenrexroth2555 6 жыл бұрын

Wonder if that swing nut ever got properly tighten

@harrygatto 5 жыл бұрын

Now it just needs to have a little crane installed on the carrier to lower and raise the wheel.

@PlumdogMilli0naire 4 жыл бұрын

3:39 Sounds like my room at 11pm when I was 16

@Alex.369 6 жыл бұрын

Bonito pero muy pesado para mi gusto

@surenshahnazarov5347 5 жыл бұрын

Super

@khurramkhan9904 7 жыл бұрын

nice

@423XJ 8 жыл бұрын

Total weight of bumper and tire carrier portion? (without tire, hilift etc)

@SamVeneman 8 жыл бұрын

I'm about to buy a used one of these. How is it working since this install?

@Se7enAte 9 жыл бұрын

A bomb proof spindle huh? I'll have to test that...

@bleepinjeep 9 жыл бұрын

Se7enAte would love to see a video!

@Transphoenixbiker 8 жыл бұрын

+BleepinJeep I second that

@SuperScarypeople 8 жыл бұрын

1:40 its called a reach around

@jcgomez2931 5 жыл бұрын

Looks awesome but i ll have to donate one of my kedneys, or work overtime next summer hahahahha

@pacosanchez2294 5 жыл бұрын

Total:500kg , gasto promedio 30litros

@suchasreallife 7 жыл бұрын

you have to take the plate off to take the spare off ? spare tires impacted on how are you gonna get it off on a trail

@skeetorkiftwon 6 жыл бұрын

suchasreallife Mall crawlers don't go on the trail lol

@skeetorkiftwon 6 жыл бұрын

suchasreallife AAA going to take that tire off. Kid can't even lift his 34 10s lol

@coupesix 5 жыл бұрын

Yeah that would be super tough to take the license plate off....

@XJrick303 4 жыл бұрын

So installed this and found I now have to remove the back window wiper arm...uhg! I thought I was done.

@aaaaas640 4 жыл бұрын

🇪🇸 donde se puede comprar ese porta ruedas de recambio 👌👍

@junkopotomus 4 жыл бұрын

I did not know Jay Baruchel was into off road fabricating.

@Jeffs40K 3 жыл бұрын

I like the design BUT it blocks your whole Back Window. I thought I saw it had spacers to go under the Spindle to raise it for sag.

@EvanMoon 5 жыл бұрын

Friendly mailman not included

@jorgecantusosa7942 7 жыл бұрын

i have a 01 jeep grand cherokee do u have any wed sites that i can get something like that and any other body armer and bumpers