XK K110S Mini 3D RC Helicopter OpenTX RadioMaster TX16S Setup
Рет қаралды 21,803
Күн бұрынHow to setup XK K110S mini 3D RC helicopter with OpenTx RadioMaster TX16S video tutorial is here. Grab your RadioMaster TX16S, and XK K110 or K110S mini 3D RC helicopter and follow these easy steps to setup and fly your XK Mini 3D RC helicopters with your OpenTx Radio Controllers. Any questions, feel free to comment.
AliShanMao's EdgeTx Helicopter Model Files: bit.ly/alisedgetxhelis
AliShanMao's OpenTx Helicopter Model Files: bit.ly/HueyOTXHelis
FW450 V3: bit.ly/3YT8qeF
Airwolf Shell: bit.ly/3kinLXt
Huey UH-1: bit.ly/3ugxzT2
Bell 206: bit.ly/3HCnVl4
Welcome to alishanmao Channel featuring diverse and latest rc hobby, tech, drone, electric paramotor eppg, interesting content and adventurous Video Blogs.
Visit Our Site: createc.store
Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinalishanmaoyt
My 3D models: bit.ly/2H3pxDH#helicopter
#XK #k110s #3D #opentx #radiomaster #tx16s
00:00 Intro
01:05 Setting a new model
02:46 Setting widgets
03:07 Model Name
03:32 Timer Setup
04:23 SFHSS Protocol Setup
04:53 Channels Reversing
05:05 Setting up Curves
05:37 Throttle Cut Curve
06:05 Normal Throttle Curve
06:33 Idle Up throttle curve
07:26 Normal Pitch Curve
08:45 Idle up pitch curve
10:36 Inputs setup
11:09 Throttle Settings
11:28 Gyro Inputs
13:33 Pitch Inputs
15:03 Throttle inputs
17:47 Mixing Setup
18:59 timer reset
19:22 Binding
19:54 Testing inputs outputs
22:39 Indoor Flight test
24:49 Final Talk
@tomlinjonathan8 Жыл бұрын
I followed everything and now my helicopter is flying! Thank you very much for a very informative and helpful video
@alishanmao Жыл бұрын
Glad it worked out. happy to help. join my supporters group please www.buymeacoffee.com/alishanmao
@skeeter06b 2 жыл бұрын
love your videos. i'm a New pilot and your videos have helped me immensely. I followed your exact tx16s program for both xkk110 and e160. Both work great for me
@alishanmao 2 жыл бұрын
Glad to know that. Have fun buddy, spread word about my channel and videos :)
@adrianpopa6653 2 жыл бұрын
Thank you very much because, with your help, I managed to set up the K110 helicopter. I am from Romania and I am following you with great interest. Thank you!!!
@alishanmao 2 жыл бұрын
always welcome. have fun. if you like join my supporters group www.buymeacoffee.com/alishanmao
@ConspiracytardHunter420 2 жыл бұрын
Hey thank you Ali. I was able to setup my radiomaster zorro to mcpx bl2 thanks you this video! Some changes of course, but I had no knowledge of openTX or EdgeTX at all before this video. It was so intimidating at first but like you said, it becomes clear when you play around with it a little.
@alishanmao 2 жыл бұрын
Glad it helped. Have fun
@alanreid250 2 жыл бұрын
Finally discovered why the aileron wasn't behaving.....wife insisting on talking while I'm trying to concentrate on following your tutorial....thankfully she went shopping for a couple of hours...went through this again and found the error..everything behaving as it should so test flight on Monday no wind....Many Thanks..
@alishanmao 2 жыл бұрын
so it was wife? 😂 or what was the error?
@jazroT Ай бұрын
Well this gave me a chuckle! 😂
@cdubb4306 2 жыл бұрын
I was looking for your setup video on this exact Tx16S + XK110s. At first you hadn't made a video then this one popped up like a gift! Lol..I'm not 3D ready yet but these settings seem to work quite well.
@alishanmao 2 жыл бұрын
Have fun buddy. if you like join the supporters group :) www.buymeacoffee.com/alishanmao
@user-br4ex1jl7k 6 ай бұрын
Ali, I really appreciate your videos. I consider you a goto source for anything RC Heli as well as OpenTx. I have a TX16s as well, a bit intimidating at first, but amazing versatility once you get fluent. Especially the bang for the buck
@user-br4ex1jl7k 6 ай бұрын
Oh have an XK 110S on order, will modify my OMP M1 settings to my preferences. I check yours for throttle and pitch curve recs and then tweak. Wanted something cheaper and smaller for beginning 3D practice
@alishanmao 6 ай бұрын
thank you and have fun buddy. you can do it. enjoy flying
@user-br4ex1jl7k 5 ай бұрын
I recently received, setup and have flown, Still tweaking settings, I like similar flight characteristics for all my helis. Other small ones are T15 and OMP M1. The 110S is one hot little bird, started adding dual rates. Anyway, great bang for the buck, much better than a Nano S3 IMHO, and very tough
@rchelicopterspace_0309 2 жыл бұрын
Absolutely this video is awesome. You're doing great. Thank you a lot😀
@alishanmao 2 жыл бұрын
You're very welcome!
@saramadu204 2 жыл бұрын
Thanks Ali! I am going to try this. Awaiting my xk k 123.
@michael.b5964 8 ай бұрын
Great explanation, I transferred your settings to my Taranis X9D and fly an xk 123 AS 350 with it. Works very well, thank you very much
@alishanmao 8 ай бұрын
Glad it helped
@txdave2 2 жыл бұрын
Thank you for this very informative video. You did an excellent job of explaining this process in a simple and straight forward manner. I have been flying the XK K110 for awhile, but recently purchased the XK K110S. Other than the larger servos I don't know what changes were made, but it seems to fly much better than the older 110 in my humble opinion. Both are great for learning to fly CP.
@alishanmao 2 жыл бұрын
agreed :)
@terjeoseberg990 2 жыл бұрын
Updated/improved software in the flight controller. They probably added stabilization to both right side up and upside down flight to make it easier for a beginner to do simple 3D.
@helicopter234 Жыл бұрын
Thanks! Made it work with EdgeTX like a charm!
@alishanmao Жыл бұрын
Glad it helped!
@FiatPandaSelecta 2 ай бұрын
Je maakt leuke video's duidelijkheid. Tanks
@alishanmao 2 ай бұрын
Thanks buddy 👍😀 join my supporters group: www.buymeacoffee.com/alishanmao
@robertnebelsky3730 2 жыл бұрын
Awsome job on these videos I was able to set up my 450 pro with the beast x. & my tx16s thank you
@alishanmao 2 жыл бұрын
Glad I could help. Might wanna check this out if you feel like supporting the channel onlyflyingmachines.com/product/alishanmaocs/ Thank you so much
@aerialcombat 2 ай бұрын
This is great I'll have to try this after I fix my xk k110, thanks for the tutorial!🎉
@alishanmao 2 ай бұрын
welcome. join my supporters group if you like www.buymeacoffee.com/alishanmao
@BlacKnight1023 Жыл бұрын
I got it!!! Thank you. Had bad tail blade. Thanks again 😊
@alishanmao Жыл бұрын
No problem 👍 have fun
@jjdc1968 Ай бұрын
A coffe is on your way! Thx a lot, mate!
@alishanmao Ай бұрын
Thank you so much :)
@skeeter06b Жыл бұрын
works great on my heli. Love your imfo
@alishanmao Жыл бұрын
Big Thanks for a Super. Enjoy the flights. and if you have any other questions, feel free to contact me.
@GrazzianiResende Жыл бұрын
Thank you for this tutorial. Hug.
@alishanmao Жыл бұрын
You’re welcome 😊
@jochenpirzer8281 Жыл бұрын
Hello Ali, Thanks for the Video, help me a lot!!!
@alishanmao Жыл бұрын
Happy to help
@ZED-PV Жыл бұрын
I love you AliShanMAO!!!!
@alishanmao Жыл бұрын
Love and Greetings :)
@leonbroekharst4724 2 жыл бұрын
Super Explained
@alishanmao 2 жыл бұрын
Thank you 🙂
@lovehobby2064 Жыл бұрын
thanks for the nice clip
@alishanmao Жыл бұрын
welcome
@passinthru4328 7 ай бұрын
Good job on this. I use the SE switch for flight modes. Each throttle curve are one value: e.g. throttle cut: -100, FM1 30, FM2 60 and FM3 80. Like you, I use SB switch for gyro. My throttle cut switch is SF.
@alishanmao 6 ай бұрын
Cool, thanks
@dayat_fpv 2 жыл бұрын
Wow nice brother 👍
@alishanmao 2 жыл бұрын
Thanks ✌️
@AndreSilva-jq9kq 2 жыл бұрын
Ótima explicação muito boa sua configuração pra pilotagem.
@alishanmao 2 жыл бұрын
thanks buddy
@kunad2294 2 жыл бұрын
you get too the point,love it, what about adding the sound to the switches good job.
@alishanmao 2 жыл бұрын
you mean a tutorial? Not necessary. just go to special functions, choose a switch and its position the sound should be, next choose play track and then from list choose sound. download sounds for Opentx online.
@bobmarkson5343 2 жыл бұрын
Awesome, thanks for posting.
@alishanmao 2 жыл бұрын
Glad you enjoyed it
@bobmarkson5343 2 жыл бұрын
@@alishanmao I sure did, this is really helpful content. Have you tried binding your bigger 3d heli's to the tx16s? You're really good at figuring out the features on that radio, I am still struggling to bind DSMX quads with mine. Have you tried the small align trex 3d heli? It'd be interesting to compare align to the cheaper brands as they were the best brand back when I was flying my 3d heli ( elfite blade 450x with spektrum controller) I'd also like to see you do an auto rotation with your big heli and your advice on safe takeoffs and landings with them because once crash will cause serious damage, especially when compared to a modern 5 inch bnf quad like a roma or a nazgul. Thanks, I really like your vids!
@alishanmao 2 жыл бұрын
@@bobmarkson5343 I fly my KDS Innova 550 with TX16S OpenTx. So far no issues. for auto rotation, best to practice on flight simulator a lot and then at low altitude with your heli. so you know your heli and its responses. I try to avoid that, as long as i do not need it. For take off and landings and flight, take it seriously, best to have spotters with you who can keep an eye around when you fly. bigger helis can cause serious damage, injuries and fatalities even. so you have to be very careful when flying with bigger helis. practice more for take off and landing and make them as smooth as possible
@bobmarkson5343 2 жыл бұрын
@@alishanmao I'm so glad you like 3d heli's and promote the subject.
@alishanmao 2 жыл бұрын
@@bobmarkson5343 i have always loved the helis :)
@cruxio02 2 жыл бұрын
ty so much
@alishanmao 2 жыл бұрын
welcome
@jjdc1968 Ай бұрын
Thanks!
@alishanmao Ай бұрын
Thank you so much buddy
@RcMcNutt 2 жыл бұрын
Amazing video! Will these settings work on a micro Horizon Hobby style Heli? Thanks for any input.
@alishanmao 2 жыл бұрын
They should. apart from Channel difference, which are easier to find and set up if concepts are clear
@atamargo99 Жыл бұрын
thanks for your videos. I am returning to the hobby after 20 years and the truth is that I have learned a lot from all your video. I am starting with helicopters again and I see the xk110 as a good option for my second helicopter. I would like to know if the configuration shown for tx16 is possible to apply with tx12. Thank you again
@alishanmao Жыл бұрын
yes it is. welcome back to hobby. if you like my videos, you can join my channel membership :)
@alanreid250 2 жыл бұрын
ok done my first forward rolls but i think that we need another video on how to set up the head with equal travel in idle up etc...cheers
@alishanmao 2 жыл бұрын
congrats :) just always fly in idle up mode :)
@jzap59 6 ай бұрын
thank you very much for your videos that you watch from France!🙂👍🏼 I have a question regarding 3D and 6G mode when I switch from one mode to another the gyroscope always remains activated on my k110 even with the original radio do I need to do something to make it work? active or deactivated? Thank you in advance my friend!
@alishanmao 6 ай бұрын
Yes, correct you need to change gyro settings for flight modes to activate 3D
@garybeckwith9045 2 жыл бұрын
Sir. Great job. I just ordered this bird. I have a TX12 RC. Is it possible to program this for the K110S? I apologize as I am new to this and grew up with the old RCs of 30+ years ago. Thank you.
@alishanmao 2 жыл бұрын
Yes you can
@billywillgamer2852 2 жыл бұрын
Obrigado por esse vídeo, gostaria de saber se você manteve essas configurações ou fez alterações depois de voar?
@alishanmao 2 жыл бұрын
i kept the settings.
@readytorock308 2 жыл бұрын
You really helped me out. Got her flying today! Now how do I program my old Wltoys v977 and AS350. I know they run on the WLToys protocol, but something is weird with the programming. Can’t get idle up to work and in normal mode the motor cuts out on full throttle. Any suggestions?
@alishanmao 2 жыл бұрын
reduce the throttle percentage
@readytorock308 2 жыл бұрын
@@alishanmao thanks!!!
@izzaniielachannel 2 жыл бұрын
Waalaikumsalam sir..support
@alishanmao 2 жыл бұрын
Thank you
@driver3306 2 жыл бұрын
Alishanmao, where do you get the extra sound files? You have sounds in your radio that I don't have in my TX16S.
@alishanmao 2 жыл бұрын
online, search for it
@maxwellgao 10 ай бұрын
Thank you Ali, I'm learning your config to setup my EDGE TX with K110S by in the mix channel page. However, I do have one question on the gryo self stable setup. I believe K110S come with the self-stable function and can you show me how to setup it in the TX16S. Someone said just source any switch to CH5 and the self stable function will be automatically turn on. Can you help to confirm? This is a very useful function to noobies like me.
@alishanmao 10 ай бұрын
Yes, exactly. you set channel 5 for flight modes, first is stabilized 6G and then other is Idle up 1 and 2 using 3 position switch
@maxwellgao 10 ай бұрын
@@alishanmao LOL, your background looks like China until I realized you are in China.
@florescentgamer6650 Жыл бұрын
Could you do a video on how to set up radiomaster Zorro to align t15 for beginner please. 10 degree pitch would be nice as I don't want to do 3d thanks
@alishanmao Жыл бұрын
just follow my new Opentx setup video. you can find it on my channel
@jasonwright6433 Жыл бұрын
Hey love the content. I have a problem and I’m not sure if it’s something in the programming of the radio or the heli but when I set it up this way it does not move the swash plate up and down in idle up mode and When I spool the motor up in normal mode it shuts off at about 20% throttle But when I put it in idle up it winds up and when the stick is barley over half throttle the motor shuts off. I’m lost
@alishanmao Жыл бұрын
kzfaq.info/get/bejne/aptylq971rXdh4U.html follow this setup
@talalahmad9171 2 жыл бұрын
👍👍👍
@brianroberts5062 2 жыл бұрын
Great video as usual. 👌One thing I am not sure is correct is the Pitch curves you set up on SB (Son of a B'arch) 😂You have normal curve with switch up and 3D on Switch down. When you set it you said that the middle position was Ok as it would not send anything to the Heli. From my understanding that is true but.....flicking the switch from up to centre will turn off the pitch normal curve. And leave no curve? Same in reverse from 3D pitch to centre. The same can be said with the gyro as it uses the same switch. Can you check this and confirm? I have my XK helis set to my Futaba T18SX not my T16S Max. If you throw the switch quickly I guess you won't notice a change, so can you switch to centre and tell us what happens when it stays there.? Cheers 🍺
@alishanmao 2 жыл бұрын
I tested it. now for me it works. when SB is in the middle nothing changes, heli stays in 6G Mode and normal pitches. as soon as it hits 3rd Position it switches to 3D. same when going back. no issues as all. i flew it yesterday outdoors and it was fun. will do some videos later
@brianroberts5062 2 жыл бұрын
@@alishanmao thanks, good to know. I will not need to have intermediate transition settings any more. Cheers 👍
@alanreid250 2 жыл бұрын
I assume this should work with the previous k110....somehow I don't have any roll response...will check your video again
@alishanmao 2 жыл бұрын
Give it a try. it will sure work
@chandrat7236 2 жыл бұрын
👍😊
@nazaramanov2540 Жыл бұрын
Hello! When the throttle hold is on, the timer should stop, but it continues to tick for you, this is not entirely correct, since it is better to keep the throttle stick in the middle when crashing. To solve this, you need to create a lua script in which the timer will turn off when you turn on the throttle hold. Logical Switches, for example L05 a>x ch3 -80.0 SH (throttle hold) Up
@alishanmao Жыл бұрын
its people's choice, how they want to program timer.
@sergiotondini5914 2 жыл бұрын
BRAVISSIMO potrebbe fare un programma radiomaster tx16s piatto oscillante ccpm con tre servi miscelato grazie e complimenti per i tuoi filmati
@alishanmao 2 жыл бұрын
I have programmed Micro BeastX on my 550 size heli using this radio. video is on my channel
@linkspyder 2 ай бұрын
Hi. finally made it to work with zorro 4in1(for the internal module, do not use lbt firmware, otherwise the futaba protocoll will not show; also had to make a RF adjustment to 75 because is was not binding properly); do you have any update info/refined setup for this same heli? thank you
@alishanmao 2 ай бұрын
thanks for update
@mikepdel Жыл бұрын
Hi thanks so much for your videos I just transferred this heli XK-120 to my radio master, I think I did everything in your video, read most of comments but didn’t see it, when I switch to idle up the stabilizer is still there it won’t let me roll it or a loop any idea thanks 🙏
@alishanmao Жыл бұрын
watch and follow this video: kzfaq.info/get/bejne/aptylq971rXdh4U.html its new and better, easier setup.
@mikepdel Жыл бұрын
@@alishanmao Hi thanks for the reply I did as the video still my xk-120 won’t flip or loop when I switched to idle up, is there a way to disarm the stability mode ? Thanks
@alishanmao Жыл бұрын
@@mikepdel its in the gyro settings,. if yours can't flip that means your gyro settings are wrong. once gyro switches + or - values it will be able to flip
@hamizanrivoldiantoe2118 Жыл бұрын
Aslm, was wondering if Flysky TH9X would bind with this helicopter
@alishanmao Жыл бұрын
not without a proper module for sfhss
@nazaramanov2540 Жыл бұрын
If anyone needs it, here are the settings for the correct timer. Logical Switches, for example L05 a>x ch3 -80.0 SH (throttle hold) Up
@giorgosstolis3322 2 жыл бұрын
Can one use these settings for an Eaching E150 or E160 ?
@alishanmao 2 жыл бұрын
yes but pitch and throttle curves might be different
@smibawazir4761 Жыл бұрын
hello. any idea if i can connect an external receiver? preferably sbus or ppm
@alishanmao Жыл бұрын
you can if there is a port for it
@jakelang4387 2 жыл бұрын
i went into imputs and turned my channels down to 70 percent , acepted the gyro channel . that stayed at 100 just did my curves and being i had the channels turned way down, i never fool with expo ; it gave it a good feel just ajusting the bandwidtf of the channels
@alishanmao 2 жыл бұрын
yes Opentx gives us lots of ways to tweak our settings. the way we like
@jakelang4387 2 жыл бұрын
@@alishanmao you did a nice video sir on the xk ,,only one I've seen .I fly my 110 and 120 with a 9xrpro I've been watching you sense 2009 back when I had my esky belt cp ,,thank you so much
@lfrecords3970 2 жыл бұрын
Also man you do a couple not mistakes but some settings can be done with lot less creating or setting other things....but even Also... radiomaster t16 has already two models helicopters and you can copy that factory Heli settings and just do two three changes and Ready in two minutes... like omphobby m2 for example it's ready installed in radio... you can also use that for other helis by copying the model rename it and that's it....in this video your spend half hour when even with edgetx using touchscreen is awesome....i don't know if models there come empty but here hsd already airplane settings Heli settings etc....best regards Petros Keep it up man we are watching u
@alishanmao 2 жыл бұрын
Thanks for comment. I have the very first version of RadioMaster TX16S that did not come with any model settings pre set. also i have heli setup in my radio and i Could have just copied it but then people will not understand how to perform the setup from scratch. that is why I did this detailed video to give people a setup they can do from scratch and understand all the concept.
@cdubb4306 2 жыл бұрын
@@alishanmao on this topic, does this mean if I already have Eachine E160 setup in my tx16s, that I could just copy that, change name of heli to XK110s and use those same settings? With no issues?
@jakelang4387 2 жыл бұрын
@@cdubb4306 yes
@jakelang4387 2 жыл бұрын
He is trying to teach the people how to set up a open tx ,,watch some of his earlier videos and you will see he already knows about that
@cdubb4306 2 жыл бұрын
@@jakelang4387 I'm new to Collective pitch, just starting out with Radiomaster. I actually prefer to learn these techniques from scratch as I am a beginner. These videos are helpful for sure..I always wondered if I could just "copy & paste" an existing heli...might try it just to see how differently heli flies
@marcbaillius4658 2 жыл бұрын
HI WHERE WE CAN DOWNLOAD THE SETTINGS FOR RADIOMASTER 16 PLEASE? THANK YOU FOR THE NICE VIDEOS ,I AM GREAT FAN.
@alishanmao 2 жыл бұрын
just follow the video. i did not upload settings
@Cristina-qm3sn Жыл бұрын
Hello. You have review helicopter wltoys v950??
@alishanmao Жыл бұрын
done years ago
@TimsRcsurgery Жыл бұрын
Me again!! Just purchased a OMP M2 EVO… I have a Taranis X9D Plus TX.. will this setup work for this combination? Thanks in advance 😊
@alishanmao Жыл бұрын
Get this file, bit.ly/HueyOTXHelis open it in opentx companion, connect your X9D Plus and drag the M2 Evo Model to your radio. this is my latest setup, much better and simpler than shown in this video
@TimsRcsurgery Жыл бұрын
@@alishanmao wow!!! Thank you so much 😊 I’ll do this after work 😃
@TimsRcsurgery Жыл бұрын
@@alishanmao done! looking forward to the maiden flight!!😀
@alishanmao Жыл бұрын
@@TimsRcsurgery wish you all the best :)
@reginalp1997 2 жыл бұрын
I have k120 after all the set up the tail won't spool up til over middle stick, what adjustments?
@alishanmao 2 жыл бұрын
if its flying ok, don't worry
@gerardmazz 16 күн бұрын
Can this setup be good for the xk k127 helicopter also I'm new to the radiomaster tx16s mk11
@alishanmao 14 күн бұрын
if its not 3d, no
@gerardmazz 14 күн бұрын
@@alishanmao thanks but do you have a setup video for the xk k127 helicopter and if not can you make one
@AmineAmine-zi6hb Жыл бұрын
Hello Alishanmao, I am a beginner in RC Helicopter, and I want to acquire a RadioMaster TX16S Mark II and an XK K110 Helicopter, and I don't know which one to take (ELRS/4-in-1) (FCC/LBT) ? Cordially,
@alishanmao Жыл бұрын
4-1 is best. rest of the protocols you can easily buy modules.
@alanreid250 2 жыл бұрын
I have been through your video so many times and everything is correct...Aileron/roll is stuck in channel monitor at -100 or plus 100 if reversed in outputs???
@alishanmao 2 жыл бұрын
you can reverse outputs. those monitors just show the moves. as far as your heli flies and works well. don't care about what monitor is showing on channels
@alanreid250 2 жыл бұрын
@@alishanmao Still no physical movement on swash for aileron...pitch and throttle are fine
@raycapobianco8137 2 жыл бұрын
@@alanreid250 did you ever figure this out? i have the same issue. no movement on elevator/aileron
@alanreid250 2 жыл бұрын
@@raycapobianco8137 Hi …just deleted the model and started from scratch and everything was good…seems that I had made an error while programming the radio….just take your time and double check everything you enter….hope it works
@arnoldgines3381 2 жыл бұрын
Hello sir Ali.. can use the same setting to my XX K110? Thanks
@alishanmao 2 жыл бұрын
Yes, you can
@arnoldgines3381 2 жыл бұрын
@@alishanmao thank you so much sir Ali..I hope you continue more great video.
@maxxfx2164 2 ай бұрын
Could I copy these model settings and use them for my omp m1 aswell
@alishanmao 2 ай бұрын
yes
@skeeter06b 2 жыл бұрын
looking to program my 230s smart to tx16s. Can't find any imfo. Any pointers ?
@alishanmao 2 жыл бұрын
use these settings and then tweak from there
@maskystudio9193 3 ай бұрын
Assalamualaikum... I watching this video till end .but I dont see mixes how to setup
@alishanmao 3 ай бұрын
its all in there buddy
@nickrich710 2 жыл бұрын
Do you have any videos on hooking up send whoops I have a cinewhoop from. Get rc25 trying to set it up on my radio master t16s
@alishanmao 2 жыл бұрын
whoops are super easy. just setup plane model. no need setting up any curves or stuff like that. then setup with betaflight
@nickrich710 2 жыл бұрын
Thank you for the help
@nickrich710 2 жыл бұрын
@@alishanmao what instructions are you talkin about for the fpv for the first time never did it before
@alishanmao 2 жыл бұрын
@@nickrich710 Check my new FPV mini Airplane videos. first time its best to use a smaller RC Airplane and fly short distance within 100 to 500 meters only. practice more. keep your eyes on horizons and land, dont' climb too high. learn to control via FPV view and keeping good cruise and altitude.
@timtim7204 2 жыл бұрын
I was wondering that your setup is totally different as couple years before..... I regognized "white" version of K110 (not K110S) has also 2 versions in the controller setup! Old version throttle can be regulated from -100 to +100. (0 to 100) Newer version have only from -100 to +40 (0 to 70). From +40 to +100 no increase of throttle. That is crazy. Improvements on this heli: a) GNB 520mah HV LIPO, +0,15 Volt increase the RPM, Lipo fits without issues b) Change plug to GNB27, 0,05 to 0,1 Volt more efficency c) Change tail blade to Blade mCPX/2 (need small driller, drilling by hand to open hole 0,1mm) 4 years of K110 experience: - Number 1 end of lifetime. - Number 2 not found in deep gras - Number 3 left in a tree - Number 4 with black motor - Number 5 and 6 with purple head on the motor. (since 1 to 1,5 years available) - Number 4 and the 5/6 fly different. Now I understand why :) kind regards Timo
@microhelicopters2106 2 жыл бұрын
I setup my xk k 100 helicopter the same way as you , and when I fly my xk k100 helicopter I get more negative pitch but not much positive pitch. How can I get the same pitch on negative and positive pitch.
@alishanmao 2 жыл бұрын
check the gear first. sometimes when the main shaft is slipped up, on gear it will give you negative pitch and won't take off. fix the gear and then re set the pitch curves.
@microhelicopters2106 2 жыл бұрын
@@alishanmao it is a new helicopter, I have not crash it yet ,but the gear is ok. If I put more postive on the setup . The tail of the helicopter will blow out. So if I setup the pitch at 85 the helicopter tail will not blow out.Thanks for your solutions :)
@combinacijus Жыл бұрын
On new firmware you can find SFHSS under Futaba protocol
@alishanmao Жыл бұрын
yes
@MrGrahams1 Жыл бұрын
Hi ya Can you give some gentle throttle and pitch curves for my trex 600n using my spektrum dx7 dms2 radio
@alishanmao Жыл бұрын
yes you can, but i am not sure if internal RF will bind to spektrum receiver? but if I missed it and there is spectrum rx support then you can bind and fly without issues. range is good
@MrGrahams1 Жыл бұрын
@@alishanmao just one question what sort of range could i fly safely?? Thank you using the AR7000 with sat receiver.
@MrGrahams1 Жыл бұрын
Have you ever done a video on setting this type of heli with this radio thank you lots
@alishanmao Жыл бұрын
@@MrGrahams1 1km should be no problem
@alishanmao Жыл бұрын
@@MrGrahams1 kzfaq.info/get/bejne/hJt5Y5mh1Kiun6M.html KDS550 with microbeastx setup
@glyn903 Жыл бұрын
Have you set it up in edgetx yet? I just updated to Edge and I have a k110s coming in this week. Hoping to cheat and download the file so I can get home from work, bind n fly. 😊
@alishanmao Жыл бұрын
a little difference, concepts are same. so you can easily setup. i am happy with opentx, i do not need edgetx. I am actually moving to Futaba, Planning to Get T16IZ
@zipppiz Жыл бұрын
Did you get it working, Im in the same situation just got my TX16S and updated to EdgeTX
@glyn903 Жыл бұрын
@@zipppiz yes I did. Just followed the video and put in pretty much the exact same thing. Edgetx just looks different but it's the same data.
@zipppiz Жыл бұрын
@@glyn903 great, I did as well now just need to try it out 🙂
@glyn903 Жыл бұрын
@@zipppiz it flies great with the radio! I did have some drift at first but figured out how to reset they gyro in 3&6 G.
@theofreestyle1 Жыл бұрын
Do taranis qx7 da sie xk zbindowac? Czy potrzeba multi?
@alishanmao Жыл бұрын
You can. Use sfhss protocol
@edwinzamora183 2 жыл бұрын
Can the XK K110s be bind to jumper t lite?
@alishanmao 2 жыл бұрын
yes
@francescolocorriere 4 ай бұрын
if I have the input hold mode How do I avoid it being activated idle up1 idle up2 ? I want a input(hold mode) prevails over others (idle1,idle2)
@alishanmao 4 ай бұрын
you will have to program them by using over ride funtion on a switch that keeps helicopter in one mode only unless its flipped than other values are passed
@rubenraj3387 Жыл бұрын
can i upgrade my k127 to k100 with their motherboard and servo ?
@alishanmao Жыл бұрын
i dont' think so
@cloydr6178 Жыл бұрын
can i use spektrum dx6i transmitter with this xk k110s?
@alishanmao Жыл бұрын
i believe you will need to add a satellite receiver
@cloydr6178 Жыл бұрын
@@alishanmao is that the small receiver with wires connecting to the big receiver? If yes, my receiver has that.
@kevinslominack97 4 ай бұрын
On mixing, it looks like your Gyro populates itself. I have a Zorro 4in1 and I am unsure how to get Gyro on the Mixes screen.
@alishanmao 4 ай бұрын
if its opentx or edgetx, process is same, menus are same bud
@kevinslominack97 4 ай бұрын
Yes, the menus are the exact same. However I don't know how you populated gyro onto the new screen at number 5?
@kevinslominack97 4 ай бұрын
*when you flip to the mixes screen.
@alishanmao 4 ай бұрын
@@kevinslominack97 you can follow my new tutorial, i did a live show for edgetx setup. thats the easiest and works straight away
@manhandy74 2 жыл бұрын
I just go my k110s and set it up with my tx16s but mine wil not go in 3g mode. The red light does not go in blinking status. Do i have a faulty heli?
@alishanmao 2 жыл бұрын
3G or 3D Mode? its all in gyro positive and negative settings. you must make sure you switch to right gyro mode to get to 3D mode
@manhandy74 2 жыл бұрын
@@alishanmao Sorry, I ment 3D mode. Mine won’t do that. It stays on self level mode. Channel output is correct from -100 to +100 on channel 5 when I flip the switch.
@MrMulticam21 5 ай бұрын
Is this possible at my Radiomaster TX12 Open TX?
@alishanmao 5 ай бұрын
yes
@user-lr4sq9wq4y Жыл бұрын
Hi sir, Can I do it for wltoys v950 (KN protocol)?
@alishanmao Жыл бұрын
I am not sure buddy. mostly I saw that WLtoys uses SFHSS / XK is also WLToys brand,
@user-lr4sq9wq4y Жыл бұрын
@@alishanmao Thanks for your answer, i'm bad English and newbie in Helicopter RC. In K110S has 3D/6G mode, The way you are doing is making 3d mode or 6g mode or both?
@alexandergabrielcmendrez2071 Жыл бұрын
How to set up k110s in xk x6 alishanmao u can show me?
@alishanmao Жыл бұрын
I do not have those radios
@BlacKnight1023 Жыл бұрын
Help Me please. I've watched over and over. My tx16s doesn't do what yours did. It doesn't look the same.
@alishanmao Жыл бұрын
kzfaq.info/get/bejne/aptylq971rXdh4U.html try this video tutorial
@kasinguyen Жыл бұрын
How about tx12? pls help
@alishanmao Жыл бұрын
i do not have one but it should be about the same concept
@kunad2294 2 жыл бұрын
how do you add more sound track to your radio.
@alishanmao 2 жыл бұрын
in Special functions
@kunad2294 2 жыл бұрын
@@alishanmao thank you so much.
@kunad2294 2 жыл бұрын
Got you, when are we going to see more of the Hubsan ace pro I'm very excited about it.
@aerialhorizonrc7827 2 жыл бұрын
I'm surprised you have not switched to Edge TX.
@alishanmao 2 жыл бұрын
did not see any need for it
@alanreid250 2 жыл бұрын
@@alishanmao Keyboard is really,,,really handy for names etc
@richardhulshof8029 Жыл бұрын
Hello Alishanmao i follow your tuturial , pitch normal is that the 6G mode in this setup ??
@alishanmao Жыл бұрын
yes its 6G
@lfrecords3970 2 жыл бұрын
Hello alishamao...man why you still using openrx? I and lot of people Installed edgetx on the radio and it's perfect and finally touch screen is enabled......
@alishanmao 2 жыл бұрын
I love old school :) I am an old guy
@lfrecords3970 2 жыл бұрын
@@alishanmao hehe,.. I'm old too .... just not school..... I gave it a shot and loved it especially the touchscreen...you maybe not Very good pilot on helis but I love your job and videos when you have helis And maybe it's time try freestyle racing drones ( I have More than 20 helis 450 to 700 size mostly Goblins and Mikados and some align.....i loved xk110 cause it's extremely durable... does almost all 3D manuvers and it's cheap... I was going for xk110s but it was in out of stock.... And now the prices are almost double...i m pro pilot anymore at helis which I think it's the most difficult to fly and drones with the DJI goggles)....all perfect
@alanreid250 2 жыл бұрын
@@alishanmao you're a youngster...I'm 66 and love edge tx and touchscreen is wonderful.....eachine tx16s and no sfhss protocol showing?
@alanreid250 2 жыл бұрын
Ignore sfhss ...found it under futaba on edgetx
@lfrecords3970 2 жыл бұрын
@@alanreid250 sfhss is working fine with edgetx.... who said that isn't? I use it.
@willipreugschat Жыл бұрын
Sorry, wrong Link. Correct: kzfaq.info/get/bejne/aptylq971rXdh4U.html
@vascoalmeida9805 Жыл бұрын
Why have Ch1 and Ch4 have to be reversed. Thanks.
@alishanmao Жыл бұрын
this is the way
@theoztreecrasher2647 8 ай бұрын
@@alishanmao And we must follow the Way of the Shoe, Bwian! 😉
@Nabilphysics 2 жыл бұрын
I am wondering why your video viee getting lower than previous.
@alishanmao 2 жыл бұрын
Thanks to new KZfaq Happy algorithms
@Nabilphysics 2 жыл бұрын
@@alishanmao very sad
@alexandergabrielcmendrez2071 Жыл бұрын
I cant set it up
@alishanmao Жыл бұрын
try again
@alexandergabrielcmendrez2071 Жыл бұрын
@@alishanmao ur first k110 radio set up
@alexandergabrielcmendrez2071 Жыл бұрын
@@alishanmao is that an x6 radio
@willipreugschat Жыл бұрын
Because of your video I ordered the XK K110s. Thanks for the detailed information. You have created another heli setup video with kzfaq.info/get/bejne/mpegd7Cd0cuWe40.html. Here are different pitch and throttle curves than for the XK K110s. What are the better curves for the XK heli?
@alishanmao Жыл бұрын
i will make a video on K110S Edgetx setup soon. wait for it
@willipreugschat Жыл бұрын
@@alishanmao o.k., thanks.
@immim9398 2 жыл бұрын
Im Islam
@alishanmao 2 жыл бұрын
alhmadolillah
Nikita Zdradovskiy
Рет қаралды 7 МЛН
RC Video Reviews
Рет қаралды 99 М.
Buddy RC
Рет қаралды 22 М.
CurryKitten
Рет қаралды 11 М.
Toy Kid
Рет қаралды 29 МЛН
Typecase
Рет қаралды 10 МЛН