The Best Hop Up Unit for the Action Army AAP-01 (Hadron Airsoft Loki)

Рет қаралды 33,459

Жыл бұрын

This is by far the best Hop Up Unit for the Action Army AAP-01
The Loki Hop Unit gives you true top dead centre (TDC) adjustment and the simplistic design is pure genius.
you can find out more here: hadronairsoftdesigns.uk

Пікірлер: 65

@jakebrann1112 Жыл бұрын

Thanks for the video brother. im 100% getting this

@dudearlo 20 күн бұрын

Just bought one :D Been on the look out for this for a bit 😅

@DazedPhasesofLazerbeams 3 ай бұрын

Another tutorial of yours followed and another successful install. I would love to see what you would do about an extended barrel tracer setup. Thanks again for the vids!

@tacticaindonesia8140 26 күн бұрын

Thank you for sharing, lad.. 🙏🏻

@loops01 Жыл бұрын

Great video :)

@scopex2749 4 ай бұрын

NICE just bought the basic pistol fitting a load of upgrades to make this my new primary.

@zammas3782 2 ай бұрын

any updates bro ? im looking to make it my primary too

@oscarpicazo5367 Жыл бұрын

some great content ever since I got the aap I'm definitely gonna use your vids to guide me. just wondering what size or if possible link to the maple leaf barrel I'm still new to all this.

@SupeS19811981 5 ай бұрын

Just curious what is the precision driver you use? Looks really good quality and all the ones I have looked at/used end up being pretty bad. Need to get a new one and this one intrigues me. Cheers for any assistance 👍🏻

@DMC619 Жыл бұрын

Hard choosing between this and the stalker kit with everything in it..

@MAJmufin 11 ай бұрын

pre installed kit should have warranty from them. this probably is at own risk.

@lostranger1353 Жыл бұрын

whats the best inner barrel on the market?

@danaschlund3628 Жыл бұрын

Can it fit in the fuku-2 upper without making holes?

@kaydenmosley538 Жыл бұрын

Can you still use a drill kit

@asmrbear1057 4 ай бұрын

have you please a link from Inner Barrel?

@rodribap Жыл бұрын

What is the length of barrel

@lswade4368 2 ай бұрын

3:32 that weighted screwdriver tho 🤤 where is it from?

@WroobelChannel 9 ай бұрын

I got same configuration, but still digging info on best possible inner barrel. Would You recommend something?

@percival5771 5 ай бұрын

crazy jet inner barrel bro. ive found its got some beautiful consistency. rarely ever get any shots that dont go where im aiming (provided my hop up is adjusted)

@nickrobinson706 Ай бұрын

i only saw at the very end the HPA bit out of the bottom, please please tell me more about that, i have a huge mag adaptor thingy to make mine go and i want what you have there

@Jaeger-Precision Ай бұрын

There is a full video already on the channel for you 😁

@hebuggin3599 Жыл бұрын

could you send links to the tools you used, id love to buy them

@WroobelChannel 9 ай бұрын

@bloodyshrapnel2119 9 ай бұрын

What is tge mans name tgat invented this. Id like to ask him what that little plate tgat prevents the grub screw from backing out is called for another project

@jeffbezzos9340 7 ай бұрын

possibly stupid question is this going to significantly increase fps and if so could that be above site limits

@dthompsont3796 2 ай бұрын

A hop up unit shouldn't increase FPS. A different barrel and Bucking might. Tighter fitting bucking creates a better seal. Tighter barrel does the same thing.

@ashir555 Жыл бұрын

Can you install this hop up unit with a mini mamba top reciver?

@Jaeger-Precision Жыл бұрын

Yes you can

@darrensmith5296 Жыл бұрын

Has anyone used this Loki on a tti pcc carbine kit with the TDC kit on the carbine kit? Thanks

@vitosatalino96 Жыл бұрын

@DazedPhasesofLazerbeams 3 ай бұрын

Question if you don't mind. I followed your build almost to the T and my fps is super low. Like 250 at the highest. Hadron loki, flamingo bucking, cow cow nozzle block ,guide rod, and light weight blow back unit. Maple leaf barrel CJ 131mm...I did "upgrade" my piston head to the tti one. 200% nozzle spring and 130% recoil spring. I'm going to change to probably a 150mm barrel if it'll fit in my tracer unit. Maybe that'll help some but it seems like Ive downgraded :/ Any ideas? I will say it seems like the nozzle made more of a suction fit to an old lacapa bucking. But that bucking was terrible.

@Jaeger-Precision 3 ай бұрын

Add some hop adjustment. Your Hop rubber might not be holding the BBs correctly when loaded.

@DazedPhasesofLazerbeams 3 ай бұрын

@@Jaeger-Precision Ill try this out. I wonder if I need to use heavier bbs. Im using the 50 degree bucking and .32g bbs. Thanks for the quick response. I literally couldn’t find anything on google.

@Funkertruppen Ай бұрын

wich gas are u using... and maybe a 50degree for 0.32 maybe is too low. how many joules u have?

@Spacegoat21 5 ай бұрын

Have you tried the Kraken stalker unit

@Jaeger-Precision 5 ай бұрын

Yes. It wasn't very good. I decided not to make a video on it as I had nothing good to say about it so didn't want to promote it on the channel

@mrbullfinch Жыл бұрын

Hey, I've installed the Loki and flamingo, but not the bolt just seems to get jammed open. And idea what the problem could be? I thought I was the flamingo not sitting all the down

@netaslive Жыл бұрын

Try original rubber or a diff one I had same issue with a maple leaf deception rubber

@mrbullfinch Жыл бұрын

@Grant Langley but it's the same on two guns 🔫 . I've got exactly the same set up for my son, and both guns are doing the same. Will give it a try though, but wanted to use the flamingo because I've heard they are good

@netaslive Жыл бұрын

@@mrbullfinch is it catching on the new hopup itself? Some of the sharp corners may be hitting areas. Try to identify where things are hitting

@mrbullfinch Жыл бұрын

@Grant Langley the bolt doesn't seem to be going all the way in, almost as if the rubber isn't far enough into the barrel

@mrbullfinch Жыл бұрын

Will do

@halequin117 10 ай бұрын

Has anyone else had any issues with BB’s getting stuck in the barrel just where the hop is? I installed rhe flamingo 50A GBB bucking and using point 3 weight BB’s and the occasional shot is sitting in the hop, just wondering if it is a “it’s new and needs wearing in” kind of thing

@tonydiazist 7 ай бұрын

ever figured it out?

@dthompsont3796 2 ай бұрын

A BB should always be sitting in the bucking unless you are empty. It acts as a detent to stop the balls from rolling out of the barrel.

@JSNFKE 9 ай бұрын

Can i use a 60° in the AAP or is a 50° better?

@hewhoowl 9 ай бұрын

idk

@WWskeater119 5 ай бұрын

Yes, the 60 works great, the higher the hopup rubber just means the stiffer it will be.

@MartinJHarris Жыл бұрын

need to make... pins, screws and springs set so don't have to purchase a donor pistol... swap you a box of creme eggs ;)

@andrewrodrix85 Жыл бұрын

Is that a hpa aap01?? How do you do that?? 😮

@NYSeaNile Жыл бұрын

Glock/aap mag adapter for m4 or mp5 mags, regulator, tank, air hose.

@160384Stig 11 ай бұрын

@@NYSeaNileLook again, that’s not exactly what’s happening here, I think this has a permanent hose installed, I’m thinking this takes AEP mags somehow rather than M4/MP5

@NYSeaNile 11 ай бұрын

@@160384Stig well this is the easiest and somewhat cheapest way to get an hpa aap-01. I think the whole setup minus the gun cost like $350 to fully have hpa running m4 mags for me.

@cfrforce1 10 ай бұрын

It's probably the JV tactical infinite hpa adapter..