XTool M1 Review From Set Up to First Projects

Рет қаралды 47,350

Күн бұрын

XTool M1 review of the hybrid laser cutter/engraver and blade cutting machine. Will the XTool M1 replace the Cricut and give you laser capabilities? My Xtool M1 review answers that question and covers the machine setup, plus testing all the functions with my first projects.
Some links may be affiliate links.
Learn more about the Cricut Crafters Club here - cricutcrafters.com/
Find the XTool Laser Machines here - www.xtool.com/?ref=rTWIrTxgsB...
Add on Air Filter - www.xtool.com/collections/xto...
1/8 inch Birch Plywood for Laser cutting and engraving - amzn.to/3d6KuBD
Download the software here - www.xtool.com/pages/software
Thank you so much for watching my XTool M1 Laser review. Be sure to like and subscribe! and check out my blog here dailydoseofdiy.com/
00:00 Introduction
01:11 xTool M1 Box Opening
03:25 xTool M1 Machine Set Up
04:46 xTool Software Set Up
05:50 Laser Cut and Score Birch Plywood
10:34 xTool M1 Engraving Metal
12:52 Setting up the Blade Cutter
13:41 Loading and Cutting Vinyl
16:27 Testing the Vinyl Cut
17:35 xTool M1 Pros
20:09 xTool M1 Cons
22:37 Final Thoughts

Пікірлер: 83

@user-mn6hf9ep3s Жыл бұрын

Thank you for taking the time to do this! I am able to save my projects using the xTool software so I am not sure why you are not seeing that option. Also I have instructions in my manual and online that you can take to outer casing off and then use this for large projects the need to be processed using pass-thru functionality. Overall I love your informative video and explanations but I think there may be some options you didn't have at the time this video was made.

@moniquevann9950 Жыл бұрын

Thanks I’m excited to finally open my M1🌹

@ottawakravmagaacademy7013 2 жыл бұрын

I agree with you. I have both the M1 and a silhouette. Just for vinyl cutting M1 is fun but I find it slower in the process as I have to hunker down inside the machine to load a sheet. Software is still behind silhouette and cricut space which are even better. Overall I got this machine for other features. Good review, I found the same likes and dislikes.

@clarazolud4835 2 жыл бұрын

I am so happy for you...I too have been eyeing this. Congrats!!!

@_Desiree Жыл бұрын

fantastic review and pros and cons. THANK YOU!

@GetUpGirl7 Жыл бұрын

Thank you for sharing! I just got the 10W. We shall see what happens. 😊

@almadherrera2891 2 жыл бұрын

Congratulations!!! I have been wanting one for so long. So happy for you.

@cherioneil6396 Жыл бұрын

Great review it really helped with making my decision on which cutter to buy.

@MsHotgirl67 Жыл бұрын

Excellent unboxing and first time use !!! I’m sold and will be buying !

@DailyDoseofDIY Жыл бұрын

Hope you enjoy it!

@Bubblestheghost Жыл бұрын

This makes me so excited to try this machine, I’m only halfway through your video and I already know I need it. 😂Probably won’t use it for blade cutting though.

@DailyDoseofDIY Жыл бұрын

Hope you enjoy it!

@housspin1 Жыл бұрын

Hi, nice video love it, about the resizing the images (scale) its easy to fix it, just go on the lock for the W and H.

@DailyDoseofDIY Жыл бұрын

Thanks for the tip!

@creativewinggiftemporium1948 Жыл бұрын

Thanks for the video. I have a Cricut Maker and the 20w laser. I was looking at this to possibly replace my Cricut but at this point I definitely won’t.

@diplayball 11 ай бұрын

I was thinking that about getting the m1 but the 20w laser has me thinking that I should get the 20 w instead. I have a cricut maker too. How is the 20w?

@five50BCE Жыл бұрын

Thank you for the review!

@DailyDoseofDIY Жыл бұрын

Glad it was helpful!

@KristySlicker Жыл бұрын

Close the lock between the height and width and it should keep you image from skewing when you try to resize

@twylasurratt616 Жыл бұрын

Chris if you close the lock when your image is selected then it will resize properly. Thank you for sharing!

@DailyDoseofDIY Жыл бұрын

Thanks for the tip!

@TheBestUni Жыл бұрын

Thank you for the video ❤

@kirstiegreen6557 Жыл бұрын

Thank you 😊

@aliomar6252 Жыл бұрын

Thank you !

@doreenorourke6853 10 ай бұрын

Thank you this was very clear and concise

@jeanettesefers8180 Жыл бұрын

Very helpful. Thank YOU.

@DailyDoseofDIY Жыл бұрын

Glad it was helpful!

@livelandings747 Жыл бұрын

Thanks for the video. Is the camera acurate enough to allow print and cut?

@tmo6517 Жыл бұрын

Great review!

@user-wb2oc9ot9v 10 ай бұрын

Great video, helped a lot. thanks so much

@MrDigitalman01 Жыл бұрын

Are you able to score and cut at the same time? Or did you score first then laser? Did you also group them?

@MyNailsandMorebyJohna 2 жыл бұрын

great review nice

@thecraftguy21 Жыл бұрын

Can you so a video cutting cardstock with the laser ? PLEASE 🙏🏻 TIA 😊

@longitudes Жыл бұрын

This machine can cut acrylic 5.5mm one pass ??

@lindawren4860 Жыл бұрын

Hi 👋🏻 can you use this with an iPad Pro and iPhone?? 😊

@ehodge54 2 жыл бұрын

Very good video! Did you figure out if it had a lock feature so the files doesn't get distorted? I have hearing loss & sometime (even with cc) I don't understand what is being said. Also, where do you buy the add on filter? Didn't see it on the Amazon links.

@DailyDoseofDIY 2 жыл бұрын

Yes I did find it. There's a little lock on the top menu like in Cricut Design Space. And I did forget the link to the filter! Thanks for pointing that out, I'll get it added.

@ehodge54 2 жыл бұрын

@@DailyDoseofDIY, thank you!

@delainehampton6513 Жыл бұрын

I can’t get my m 1 to cut through my 3mm wood I’ve tried different settings so I can’t figure out what I’m doing wrong can you help me?

@madansr 11 ай бұрын

Thanks for posting the video. I bought the same machine but mine makes a lot of humming sound when sitting idle. It seems to be coming from the motherboard fan. Does your machine do that as well?

@selindacv Жыл бұрын

Thank you for sharing, I want to know if it will engrave tumblers like that or do I need to buy something else to laser tumblers?

@DailyDoseofDIY Жыл бұрын

Yes it will, you'll need to buy the rotary attachment or a bundle that includes it.

@Taino137 Жыл бұрын

How can i do a picture?

@mlynngreig Жыл бұрын

Thank you so much for making this video. I am looking for a machine that will cut ribbon with heat to seal the ends. Will this machine do that? Thank you so much.

@DailyDoseofDIY Жыл бұрын

I don't believe it will, but I haven't tried either.

@donnarana1997 Жыл бұрын

I ordered one not realizing I can't use a chromebook what type of laptop are you using

@HowToRestoration Жыл бұрын

Hello, I was also selected for the promotion of M1. How many devices have been sold through you so far, thank you

@bernadettethomas4725 Жыл бұрын

Does it cut wood, basswood and plywood, thin of course for dollhouse funiture

@DailyDoseofDIY Жыл бұрын

Yes the 5 watt up to 1/8 inch thick and the 10 watt 1/4 inch thick

@evelynmendoza4810 Жыл бұрын

Can you repass (re-cut) a cutting, like on a maker?

@DailyDoseofDIY Жыл бұрын

You can, it would be easier if you didn’t move it. But you could also relign it up with the camera for laser cutting. For blade cutting test the vinyl before you take out the mat.

@tinnyminnystore8836 Жыл бұрын

Does cut any type of acrylic sheets? I'm really interested as I work more with acrylic. Thank you ❤

@quinettabrown8836 10 ай бұрын

Not clear nor blue

@juliethierry2449 Жыл бұрын

Do you think it’s a good idea to plug the vent on a drier exhaust plug?

@DailyDoseofDIY Жыл бұрын

I don't know about that one. It would work in theory, but lint is so flammable that might be too much of a risk.

@matteatuttle2177 Жыл бұрын

Are you able to scan something from a piece of paper or save it as a document and transfer it to engrave on a necklace? Say a dogs paw print that was done in ink and than engrave it on a pendant?

@marklola12 Жыл бұрын

You just take a photo of it with your mobile and upload it to the software

@cjgroove2 Жыл бұрын

I currently live and travel in a travel trailer. Do you think there are any issues using this inside the camper?

@DailyDoseofDIY Жыл бұрын

I would vent it out a window for sure. But it’s small enough to fit on a table, so space wise it should work

@ribbleslipscomb5171 Жыл бұрын

It seems better for engraving but the cost may not outweigh the benefits for now.

@konstantinkowarsch5273 Жыл бұрын

Mhm this is the 2nd video I've seen this "pixely" Font on an engraving. Is it really that "ugly"? I do laser engraving on keychains and i am mainly interested in that thing because of the camera function. Is it possible to put, let's say some circular leather in it and center a round motive exactly on that? I've seen that in the promo video of xTool but never in real life. Nice Video btw!

@DailyDoseofDIY Жыл бұрын

Thanks! I am going to be engraving some leather this weekend, so I'll let you know how it turns out.

@MountainBabyRoses Жыл бұрын

Did they put air assist on it yet?

@DailyDoseofDIY Жыл бұрын

They have an add on now www.xtool.com/products/xtool-air-assist-set?variant=43322034716911&currency=USD&gclid=CjwKCAjwh4ObBhAzEiwAHzZYUx8T8jzCqX1MsFEbvziwQLA705Eln4EOOZUPFU9bCMotH2UlulA9YxoC7j8QAvD_BwE

@karaniles8324 Жыл бұрын

Is this able to cut sheets of acrylic?

@lukeperry19 Жыл бұрын

The laser is a diode laser so can’t cut clear type acrylic. It will cut black and solid colour acrylic

@DailyDoseofDIY Жыл бұрын

Thanks Luke!

@Jancass5 2 жыл бұрын

Well, Chris, your new toy is very cool! I’ve never seen anything like that. I can’t wait to see what creations you come up with! Oh, love your barn! We have two nice garages, but I live in Texas, so it’s too hot 9 months of the year to work out there.

@DailyDoseofDIY 2 жыл бұрын

Thanks! We're in the high heat and humidity part of our year with many days over 100 heat index, but I imagine it's worse in Texas! I love visiting there during the winter months =)

@melodymclean9417 2 жыл бұрын

Does this only work with Mac?

@DailyDoseofDIY Жыл бұрын

No it will work on windows too. Plus they have apps for mobiles devices

@janetgood2693 Жыл бұрын

@@DailyDoseofDIY Can you tell me the name of the app - I'd like to review it before I make the decision to purchase. Thanks.

@lamakredy4792 Жыл бұрын

Iam waiting for more lessons of xxtool😢

@joyweber4659 Жыл бұрын

You can save your projects.

@turboz281 Жыл бұрын

I can't get past how slow your computer is I highly suggest upgrading

@marklola12 Жыл бұрын

Ouch 10 mins just to cut vinyl that's stupidly long lol and it didn't even cut haha this is a jack of all trades master of none

@heidispencer1561 Жыл бұрын

I hate my xtool - if my glowforge would engrave tumblers i would never have bought it - it nevers works for engraving

@ShanqDad Жыл бұрын

STAY AWAY FROM THE M1 UNTIL THEY GET IT WORKING WITH LIGHTBURN!!!!!! Otherwise its just a Glow Forge and Cricket in one box

@DungeonOfShame Жыл бұрын

Purchased this because of the built-in camera. Camera is massively inaccurate rendering it completely useless. Even the framing is much too fast to see where you're placing your design. So far X-Tool have been completely useless in assisting. Awful machine. Avoid at ALL costs.

@DailyDoseofDIY Жыл бұрын

The only issue I’ve had so far was when I had it marked that I was using the risers when I wasn’t using them. That threw the design off. Otherwise it’s been perfect for me

@DungeonOfShame Жыл бұрын

@@DailyDoseofDIY Interesting. I have been in touch with XTool who have told me the camera is inaccurate by design given it is a fisheye lens. Can you confirm if you placed a piece of ply down in your machine and used the camera to place your design, would it etch exactly where you placed it or is it in any way off?