xTool S1 Essentials To Setup, Software, and Use

Рет қаралды 3,684

5 ай бұрын

This video will have you using your xTool S1 in no time! I'll review all you need to know about the setup, software (Creative Space), and initial use of your machine to get you up and running fast!
xTool: (Use code xtoolpartner to get $80 off any order over $999)
www.xtool.com/?ref=QkmZvgGyCt...
Samcraft Test File: www.etsy.com/shop/SamcraftStore
Patreon:
www.patreon.com/TabletopWitch...
Subscribe for more crafting KZfaq tutorials: / @tabletopwitchcraft
Visit Firelight Fables Candle Co. and use code TWC10 to get 10% off your order, and a little kickback comes to the channel to help fund my videos!
www.firelightfables.com/
DISCOUNT CODES on xTool, Hot Wire Tools, Terrain Tronics Items, Dice and MORE HERE: www.tabletopwitchcraft.com/ch...
ALL AMAZON AFFILIATE ITEMS CAN BE FOUND ON MY WEBSITE:
“As an Amazon Associate I earn from qualifying purchases.”
www.tabletopwitchcraft.com/am...
(Every item you seen in my video and in my studio is listed and easy to find on my website!)
#tabletopwitchcraft #xTool #xTool S1

Пікірлер: 98

@TabletopWitchCRAFT 5 ай бұрын

Brian D is the winner of the coaster and keychain... email me via my website www.tabletopwitchcraft.com so I can mail these out to you ! Congratulations ! :)

@manowar665 5 ай бұрын

Always count on you bringing new tech to the process.👍🏼 Coincidentally, my 3 watts blue laser pointer finally arrived last week and I played with it over the weekend. I can no longer see why people say these devices were so dangerous....

@TabletopWitchCRAFT 5 ай бұрын

Right on! There’s so much out there. I’m grateful for the opportunity to show this off. As for your blue laser …. lol

@MatthewPaszkowski 5 ай бұрын

The way you incorporate these new tools into crafts is awesome!!!!

@TabletopWitchCRAFT 5 ай бұрын

Thank you :)

@aaronbono4688 5 ай бұрын

These things are going to have to come down massively in price before most people even consider touching them. I can't imagine using something like this often enough to justify thousands of dollars.

@ShawnAP158 5 ай бұрын

Would love to see other videos using xps foam and some of the crafting ideas you could do with that material.

@TabletopWitchCRAFT 5 ай бұрын

All to come!

@Crystallania 5 ай бұрын

My wife wants one of those really bad. Been saving up for it and is almost there. Thanks for all the info brother!!!!

@TabletopWitchCRAFT 5 ай бұрын

You got it... Discount code for them too in the video description :)

@715craft5 5 ай бұрын

Looking forward to see how the filtration /exhaust works out. I have heard other brands like Glowforge really gum up areas inside the fan area. Keep it clean!

@TabletopWitchCRAFT 5 ай бұрын

Thanks for the tip! I’ll keep an eye on that fan for sure.

@bobosessbushcraftandsurviv4783 5 ай бұрын

So I have been watching for a long time. Because of you I bought a Proxxon. My D&D players love what I have made and I just want to say thank you for sharing all of your knowledge.

@TabletopWitchCRAFT 5 ай бұрын

Thank you for sharing that Bob. Comments like this inspire me 🤙

@combatsurvivalofalabama1835 5 ай бұрын

Thanks John!!!! Being a new laser owner this video helped me with understanding my laser better. As always these videos are so applicable to the hobby!!!

@TabletopWitchCRAFT 5 ай бұрын

Thank you :). Have a great weekend!

@johnboulton1109 5 ай бұрын

Looks fantastic! Can’t wait to see what crafts you make using this new tool!

@TabletopWitchCRAFT 5 ай бұрын

Same here :). Thanks John!

@scottsarcanecraft379 5 ай бұрын

Fantastic video on setup and use. Looks pretty straight forward in using. Can’t wait to see your next projects you use this for. Time to start my own research with plans to buy one in the next six to eight months. Thank you for a great tutorial!

@TabletopWitchCRAFT 5 ай бұрын

You got it Scott! I’ll show progress on Discord this coming week. I just bought a 4x8 sheet of birch plywood!

@mtgtraininggrounds6879 5 ай бұрын

Neat! Excited to see what crafting applications something like this has!

@TabletopWitchCRAFT 5 ай бұрын

Thanks… they’re to come!

@Nyghtslayer09 5 ай бұрын

Looks like an amazing tool. Thanks for the information.

@TabletopWitchCRAFT 5 ай бұрын

You got it :)

@tidetight 5 ай бұрын

Very advanced crafting 😮

@daynare666 5 ай бұрын

Never heard of this machine so looking forward to seeing all the diff things you can do with it

@TabletopWitchCRAFT 5 ай бұрын

Enjoy... it's an awesome piece of equipment.

@gregcopeland5588 5 ай бұрын

Man love the possibilities

@TabletopWitchCRAFT 5 ай бұрын

Definitely!

@PennySizedDreadfuls 5 ай бұрын

Super cool! This would be a game changer. 💪🏼

@TabletopWitchCRAFT 5 ай бұрын

It definitely is :)

@daynare666 5 ай бұрын

This will be amazing to build jigs for foam cutter possibly

@TabletopWitchCRAFT 5 ай бұрын

Big Time !!!

@daynare666 5 ай бұрын

@@TabletopWitchCRAFT looking forward to what you come up with

@beamstalk6475 5 ай бұрын

I like it, I am not sure how much I personally would use something like that but it is cool.

@TabletopWitchCRAFT 5 ай бұрын

I have tons of plans for this outside of tabletop gaming as well.

@andygorman858 5 ай бұрын

Have always been interested in this type of printing, and the level of detail from this would be ideal for what I plan to do (imagine all the ‘Outhouse of Doom’ kitsets you could make with this!). Great and informative vid and well worth the watch! Can’t wait to see what you make with this in future projects!!

@TabletopWitchCRAFT 5 ай бұрын

Thanks Andy. As for the outhouse of doom …. Lol

@andygorman858 5 ай бұрын

@@TabletopWitchCRAFT just imagine the sales on your web store! I’d buy one….or three 😉

@michaele1407 5 ай бұрын

Hi John, good introduction, love this tool, i wish i had a place for it

@TabletopWitchCRAFT 5 ай бұрын

Thank you. It’s pretty large, but it results in a large working area as well!

@jayjurcenko5669 5 ай бұрын

Thanks for the video, lots of cool stuff to be made.I was not in the market for one before I watched this lol

@TabletopWitchCRAFT 5 ай бұрын

Thanks… I’ve got some fun stuff planned with this machine!

@caitlynwarrington8690 5 ай бұрын

I really appreciated this video! Thank you for the insight. I have been looking for a replacement for my glowforge. They are a pain to keep clean...

@TabletopWitchCRAFT 5 ай бұрын

That’s what I hear! So far this is great. Yet to clean it though…

@homersheineken 5 ай бұрын

Cool ideas!

@TabletopWitchCRAFT 5 ай бұрын

Thanks :)

@VINTERIUM..EXPLORIUM.1 5 ай бұрын

Nice Work & Video 👍

@TabletopWitchCRAFT 5 ай бұрын

Thank you :)

@kevindraulans1941 5 ай бұрын

Very nice apparatus! Now you can make your own tools for the Proxxon Thermocut as well, just hope Gerard Boom doesn't find out! :)

@TabletopWitchCRAFT 5 ай бұрын

😮. I can get creative :)

@johnm.8109 5 ай бұрын

I would love to have one of these…

@TabletopWitchCRAFT 5 ай бұрын

It’s a nice piece of equipment!

@reddogterrain 5 ай бұрын

That looks like fun to play with.

@TabletopWitchCRAFT 5 ай бұрын

It is :)

@josray2557 5 ай бұрын

you pretty much have shifting lands right there. You can make shingles, doors, windows, probably even rollers all by yourself.

@TabletopWitchCRAFT 5 ай бұрын

You certainly can with this machine!

@colettelatham9400 5 ай бұрын

That is amazing! It was packed really well. Potential building material?? If it weren't for the rail issue and the clamp, it would be too perfect. And where do you start?!? GEEZ, the things you could customize!! It is expensive though.

@TabletopWitchCRAFT 5 ай бұрын

Yeah it’s a quality piece of equipment with limitless projects.

@erniedouglas123 5 ай бұрын

Sick!

@TabletopWitchCRAFT 5 ай бұрын

💪

@ByRookorCrook 5 ай бұрын

Lots of potential but my crafting is not at a level to warrant a purchase at this time. Good luck with you shelving unit, can't wait to see the results!

@TabletopWitchCRAFT 5 ай бұрын

Thank you…. It’s been a long time coming haha

@stevef6523 5 ай бұрын

I have enough trouble justifying my 3d printer costs, i couldn't go a full proxon, had to go a cheap, generic. Could never justify the expense of something like this, though it would be a super fun hobby tool.

@TabletopWitchCRAFT 5 ай бұрын

It really is a blast. The uses with it go way beyond crafting.

@steampunk8036 5 ай бұрын

Right on, sensei. Very informative video. I guess I better start saving my pennies! - Rick

@TabletopWitchCRAFT 5 ай бұрын

Thanks Rick!! I’ll fire it up on Discord and show you what it can do.

@claylewis8233 5 ай бұрын

Frickin LASERS!!!! awesome!

@TabletopWitchCRAFT 5 ай бұрын

Haha, right on 💪

@MrDefaultti 5 ай бұрын

Amazing machine. I always wanted one, but the cost of those are too steep for me at the moment.

@TabletopWitchCRAFT 5 ай бұрын

I hear you. There is a small discount code in the description of the video when/if you ever plan on picking one up.

@philcozzo6352 5 ай бұрын

Does the fan pull all the fumes out or do you still notice fumes / smell in your shop. I've thought about laser cutters in the past, but my workshop is in the basement and I was never sure it would work well down there.

@TabletopWitchCRAFT 5 ай бұрын

The fan does a great job but I can smell it a little bit still. I’d definitely recommend venting out your house if your shop is in the basement.

@ander2cc1 5 ай бұрын

It would be awesome to make your own MDF kits, but if I add any more toys I won't have any room to actually craft.

@TabletopWitchCRAFT 5 ай бұрын

lol I hear ya!

@robertlewis4769 5 ай бұрын

Silly question: can this cut xps foam without melting it?

@TabletopWitchCRAFT 5 ай бұрын

Great question. I plan on giving that a go. I have heard of some people successfully doing so. Imagine how fast it’ll be to create stone walls!

@durandanne-john6621 5 ай бұрын

I should like have laser tool like this one, but, here, in France they are very expensive, so I must used my hands to work and craft ! I hope have a 3D printer as soon as possible ! Bye.

@TabletopWitchCRAFT 5 ай бұрын

Thanks for watching :).

@MyklCarlton 4 ай бұрын

Always love your content, but . . . Over the past 5 or so years almost every crafting channel I've followed has gradually added more and more expensive tech to their workflow. Inspiring, but I wonder how many of your followers can afford a good 20w laser with appropriate and safe enclosure and air management systems? As these channels become increasingly 'automated', the projects become more and more out of the reach of Joe Viewer. Just an observation and maybe a heads-up?

@TabletopWitchCRAFT 4 ай бұрын

I appreciate the input. It’s nice as a content creator when the opportunity arises to obtain a piece of equipment like this to add it to our arsenal. My channel by no means is going to become a laser projects channel. Look at the last few videos I’ve done… very basic with minimal materials. It’s a balance… I’ll keep your advice in mind and I do appreciate it.

@MyklCarlton 4 ай бұрын

@@TabletopWitchCRAFTI think I was reacting to another channel getting an awesome piece of kit that I doubt I'll ever get close to! Not jealous, just frustrated by comparison to what I can do with a Proxon Thermocut and a Dremel. Guess I should get my old Photon printer working again! Keep up the excellent work!

@jerameypaszkowski4475 5 ай бұрын

Yeah they are pretty cool but man they are not cheap

@TabletopWitchCRAFT 5 ай бұрын

The saying… You get what you pay for… applies here!

@aaronbono4688 5 ай бұрын

To be honest this video just feels like an advertisement so that you can get a free one.

@TabletopWitchCRAFT 5 ай бұрын

You’re not far off. I can’t afford the cost of all these tools and supplies and keep the channel running and support my family at the same time. One video to show off their product to help support my channel…. Yep ok. Where do I sign.

@aaronbono4688 5 ай бұрын

@@TabletopWitchCRAFT speaking of supporting your channel and your family, weren't you going to have some kind of a workshop or we could come up and crafts with you? I'd rather spend money on that than a really expensive tool I'm hardly going to use :)

@TabletopWitchCRAFT 5 ай бұрын

@@aaronbono4688 Looking into that with Gerard Boom. If we pull it off it will definitely be announced on the channel. Thank you.

@katrinthorsdottir7514 5 ай бұрын

It’s nifty, but not something that I will ever be able to afford. 😢

@WOWMonsterShow 5 ай бұрын

$2200. On sale even. Ouch.

@ninjamel_official5730 5 ай бұрын

😂 that's what I was just thinking.. The small home crafting one is still super expensive too.. $999 😮 smh this is a, use if you got it for free as a sponsor review, type of tool lol

@TabletopWitchCRAFT 5 ай бұрын

I hear you. If you’re remotely in the market it’s the laser to own. Insane the things you can build with this.

@TabletopWitchCRAFT 5 ай бұрын

Awesome to start up a home Etsy shop as well. Everyone has their hobby!

@WOWMonsterShow 5 ай бұрын

For sure. and I have an Etsy shop, but I couldn’t even begin of thinking to get something this expensive. Just not a realistic tool to get with regular real life expenses, etc.