XV750 Virago 1992 Bobber 2.0

No video

XV750 Virago 1992 Bobber 2.0

Рет қаралды 44,788

8 жыл бұрын

Yamaha XV 750 Virago 1992 homemade Bobber
First Works
- Back cut frame
- Homemade exhaust
- KN Filter
- Handlebar 16" harley
- Handlebar control Harley
- Battery box homemade
- Rear fender custom adapted
- Black paint engine
- Solo seat
- Seat support homemade
- Rusty tank and pinstriping bodywork
Second Work
- New Paint rusty baby blue homemade
- Engine paint Sprido Shiny Black High Temp
- Advanced controls homemade
- Seat remote to the back
- Whitewall tire MAXXIS ordered in UK
- New rear fender fixation
- New Shocks Hagon 30mm
- External fuel gauge
- 2 Sniffers adding to the carb instead of the open air and overflow pipes
- Bar's bottle opener Pepsi Cola 50's adding to the frame
Thanks for watching ;)

Пікірлер: 63

@totteryoung841 6 жыл бұрын

just picked up an 82 xv750.. so indecisive on the way I wanted to go with it, cafe vs bobber... this walk around I just witnessed decided for me.. beautiful and I mean BEAUTIFUL!!!

@nickpinstripe1788 6 жыл бұрын

Thanks Mate I appreciate that ;) look at my Facebook these is she relooked by Pinstripe and Lettering Facebook : Nick Pinstripe

@mobiledetail4you 6 жыл бұрын

Sounds so good uncorked!

@one1_one121 3 жыл бұрын

The best XV bobber that I saw. it be inspiration for me to find some XV750

@markomarinkovic5146 2 ай бұрын

Awesome bike 👍😍

@RapperRK95 8 жыл бұрын

nice bike i like

@beardedcatguitarplus9485 4 жыл бұрын

You should make a video of a walkthrough of what all you’ve done to your bike. I just bought an old virago and I’m going to start new mods to it. When I can afford it, got to get it running first. I am so inspired by yours.

@nickpinstripe1788 4 жыл бұрын

We will have to wait a bit, I am making my website at the moment and all the information will be available in the "Project" section detailed with the photos

@beardedcatguitarplus9485 4 жыл бұрын

That sounds great. Lol in the meantime I’m going to try to start uploading on my channel about mine and the build. Beautiful bike you’ve got there man it’s my inspiration on my 84 xv700

@nickpinstripe1788 4 жыл бұрын

Thanks you so much, i'm going to look that so 😄 the exhaust sound of my bike is simple to made, remove silencer and let pipes free, use just stainless pipes for making your new exhaust, don't put quiet baffles or another shit of that. My website is on building but you'll show this project and mods, paint and other soon www.nickpinstripe.fr

@nickpinstripe1788 4 жыл бұрын

do not hesitate to follow my new project which I share on Instagram, a 1970 style chop based on Wildstar xv1600 and I have another project on a 1979 Xs650 but it will be once I have finished the chop

@beardedcatguitarplus9485 4 жыл бұрын

My exhaust is stalk has the one fake and the silly box underneath just got it unbolted today and trying to finagle it all out after lunch hahaha. I realized today I need a stand to put the bike on hahahaha backbreaking

@beardedcatguitarplus9485 2 жыл бұрын

Hey what is the diameter of the pipes? I’m trying to figure out what size I should order for bends and all that between 1 1/2- 2 3/4. I love the deep rumble yours has. I recently got a single carb manifold from a buddy so mine will be single carb ( just got tired of hassling to get the two carbs out all the time lol plus it’s soooo much easier having the single carb off to the side to reach down and mess with it as needed). I like simplicity, even disconnected the pump and got a new simple petcock with a single output. Waiting on my editing software to download to start videoing the build again.

@HuntingArkansas1 5 жыл бұрын

Reminds me a ton of my 65 c10 I'm building

@janteenmagnesium2630 2 жыл бұрын

look good ✔️ sound good ✔️ ✌

@tonysargent1699 3 жыл бұрын

It's a shame I can't give a bigger thumbs up, otherwise it would too big for screen and I wouldn't be able to see your beautiful machine!

@henrikrydh47 5 жыл бұрын

hey do you have som building pictures? i have the same bike turning it to a bobber and i most say this is the coolest I've seen. i have most interest in the tank solution with the gravity line and the electric solutions away from the handlebar:)

@thedreadedwhitenoise8743 5 жыл бұрын

The bottle opener is a nice touch! I have a 750 bobber as well with Harley risers/bars but no controls since I don't have signal lights. I like the paint job. Is that water sanded?

@jeffnobles4895 7 жыл бұрын

im working on this same bike as my bobber project and i have some questions, is that the stock exhaust just chopped?

@pistikinzu 3 жыл бұрын

Nice one man! Did you change the jets on the carburetor to adapt to the cone/pod filters?

@AlexMajor 5 жыл бұрын

OMG!!! 😍😍😍

@beardedcatguitarplus9485 4 жыл бұрын

So I got new bars, grips and all that. I got similar controls to yours but the wiring adapters dont seem to match up? It said universal. It’s soooo frustrating. Lol switched to 1” bars ( 84 XV700 ). Now need new risers too. Hate it when things don’t just line up

@mattmatty4670 Жыл бұрын

Interesting. What shape is the rear exhaust?. Cheers

@Spirit_Lanayru 3 жыл бұрын

What diameter exhaust did you use? I've got a 750 engine I'm using for a project, and I can't use the stock pipes.

@GeneralBW 4 жыл бұрын

Really nicely built. I'm about to purchase a 750 virago next week as my first bike and I'll turn it into a bobber. I have one question: the paint job on the engine. how did you leave the fins unpainted? Did you just wipe away the paint while it was wet?

@Spirit_Lanayru Жыл бұрын

You may have already solved this, but a good way to get the desired effect is to get some painter's tape and a nylon/rubber mallet, stick the tape on the fins you want to paint and gently hammer the tape into the creases of the fins. Once you do that, cut out the inside parts with a razor, paint, let dry, unpeel tape, and you should have bare fin edges.

@kristopherdavis1270 4 жыл бұрын

How did you get the extended foot grips

@johnjetton3857 3 жыл бұрын

How did you do the handle bars and switch controls

@jonathansimmons8390 5 жыл бұрын

How did you eliminate the side engine covers for the air filter and vacuum lines? I have a 95’. XV750 I’m doing now. I love this bike good job

@nickpinstripe1788 5 жыл бұрын

Yes it's very base for customising, you do remove stock air box and the hubcap at the left of the bike, and remove all fixing lug of all that for better visual

@Ramon.Santiago 7 жыл бұрын

where'd you get the seat?

@iliyakolev6700 5 жыл бұрын

one of the best viragos, you have taste:) please, tell me where you remove the fuse box?

@nickpinstripe1788 4 жыл бұрын

I placed fuse box back to the ABS plastic plate near a rear cylinder, you see ?

@jeancarlosmorenovela8497 3 жыл бұрын

Una donde la manejen

@venomdeathtrap2542 6 жыл бұрын

hey man this is one sick bike. i got the same bike and i wanted to know what bar mounts your using and where did u put the fuse box?

@nickpinstripe1788 6 жыл бұрын

I brought it back on the plastic cover next to the rear exhaust; between the battery box this famous cover. I installed the fuses on a universal fuse holder: crosscar.go-gti.com/boite-porte-fusibles-type-auto-modele-pour-fusibles-xml-2205_2534_5978-21218.html

@venomdeathtrap2542 6 жыл бұрын

sweet thanks. one more thing what size air filter is that and the tube holding it?

@nickpinstripe1788 6 жыл бұрын

KN filter diam 54 i think

@nickpinstripe1788 6 жыл бұрын

With rubber manifold same diam

@mariounterweger2934 5 жыл бұрын

hi, is this a hand brake pump from Harley? if so, did you use a 9/16 or 11/16 for the double glazing? Thank you

@nickpinstripe1788 5 жыл бұрын

What ? is just brake pump from Fatboy 96" Harley

@mariounterweger2934 5 жыл бұрын

@@nickpinstripe1788 thank for answering. Do you know the size of the pump? Was it for a double breakdisk? I did the same, original disks and brakes in the front and i used a 11/16 HD breakpump but i dont get enough pressure.

@theredbeard6333 6 жыл бұрын

I always wondered How the frame is holding the engine ?

@nickpinstripe1788 6 жыл бұрын

The engine mounts are on each side of the main frame beam and there is another mount on the rear cylinder

@estevanrios7948 5 жыл бұрын

How did u wire up those Harley handlebar controls

@nickpinstripe1788 5 жыл бұрын

I'm studying the electrical diagrams of the motorcycle

@lucboulard4196 4 жыл бұрын

Superbe, parles tu français ? Je suis sur un projet, même bécane,, je bute sur un problème technique, si un renseignement est possible, merci.

@nickpinstripe1788 4 жыл бұрын

Salut, ouai je suis FR

@lucboulard4196 4 жыл бұрын

@@nickpinstripe1788 Super, apparemment tu as supprimé les 2 gamelles (filtre à air et dépollution) c'est ce que je voudrai faire aussi, mais comment faire tourner rond le moteur sans cela (je ne parle pas du filtre à air mais de l'autre côté). Qu'est-ce que je dois faire avec les 2 grosses durite qui vont au dépollution. Cordialement, Luc

@nickpinstripe1788 4 жыл бұрын

Rien du tout, tu peux les laisser à l'air libre vu qu'il y a des filtres entre la durite de maintient sur le carbu et la durite de sortie mais ça fait moche. J'ai seulement supprimer les durites de sortie et placé des reniflars juste après les filtres.

@lucboulard4196 4 жыл бұрын

@@nickpinstripe1788 Super, merci du renseignement.Cordialement