Hahaha, yes, exactly!

Yeah, I agree.

The first thing I do with every rig I have ever owned, after unboxing and looking at how nice it looks in the shack, is to read the manual from front to back! I usually download the PDF version fro the manufacturer as It is easier to see and navigate on the PC monitor. I will then print out, on 8.5" x 11" paper, the sections that I feel will be needed the most and keep it in the drawer of my desk. I do have to say that my favorite HF rig is still my Kenwood TS-830S, complete station. It was my father's until he passed away and left it to me in '95.

HDMI costs money to license, which is probably the reason Yaesu didn't go with it, not to mention that no audio is sent to the external monitor. But yeah, move with the times.

@@HamRadioOutlet good point about licensing, but DisplayPort is a VESA standard and royalty-free. For the radio to have a long lifecycle these parts should be modular.

"These companies really need to start changing the way they develop their hardware" I'm an embedded systems guy, software and electronics. I've been through Yaesu and Icom service manuals and noticed that so far they have tended to use Japan designed microcontrollers (Icom seems to like Hitachi, now Renesas). Unfortunately Japan's big 3 Hitachi, Mitsubishi and NEC were kind of lagging in microcontroller innovation (part of what lead to them all rolling into Renesas, IMO). The H8-family micro that Icom has in its 7100 was kind of pitiful (again IMO) even at that radio's launch. These days there are any number of highly integrated ARM micros ready to interface to LCD touchscreens and any manner of A-to-D and D-to-A subsystems and fully capable of doing the DSP themselves (the IC-7100 has a TI DSP co-processor). Better yet, micros like some in the STM32 family also have native USB support and some with HDMI/DisplayPort support. But most of these microcontrollers are NOT Japanese.

@@Randrew Indeed, why not ARM? So many great little reference designs to start with, too.

The DVI to HDMI adaptor will do the trick

DVI to HDMI adaptors are cheap and work great!

Or just buy a $10 DVI to HDMI cable. They're simple cables, do not contain any embedded conversion chips. Just pin to pin wiring. Complete non-issue.

No need for HDMI as there's no audio to pass to the monitor and HDMI requires a per-unit license fee. DVI to HDMI adapters are very cheap, so you can use your modern monitor with no problems.

HDMI would be a complete waste because the resolution is so low it would be worthless. You only get something like 800x600 resolution on a big screen and it doesn't look good, I don't know why they bothered. Same on the FTDX-10. A higher resolution at least 1880p would have been great.

Rather a DVI or VGA than HDMI. HDMI are prone to make RF interference unless you have an exceptionally good cable. Had 4 wireless mics blocked by noise on a musical, turned out it was a slightly faulty screen on the lightconsoles HDMI cable. Had 3 channels blocked at another musical, culprit was the HDMI monitor used by the video crew.

Indeed you did hear Bill!

At around $1,300.00 I wouldn't consider it an entry level transceiver! The FT-891 is more of an entry level rig than the FT-710 is. Not everyone, in today's economy, has that kind of money to throw around! Especially the new, younger hams!

@@jfrphoto01 If price is the issue, then I'd suggest an ICOM IC-718 for about $650. You can find them used for $350 and up. Much easier to operate than the FT-891. I have a Yaesu FT-891 and like it a lot. But I wouldn't consider it an entry level radio compared to the IC-718.

@@KX4UL 518 is an inferior radio. I have a legacy Ten Tec I picked up for 200 bucks that's a much better radio. FT 891 remains the best value for HF/6m

@@robertkeller9828 518??? All entry level radios have their shortcomings. And new Hams do not have enough experience for it to matter. I agree with you about the FT-891… best bang for the buck. Enjoy your Ten Tec…73!

@@jfrphoto01 The 891 is a very underestimated radio, I got it to work portable mostly but use it in my sitting room connected to the Chameleon MPAS 2.0 with CAP HAT on the front lawn and make contacts all over the world with it on 20m. This is my setup when I don't want to go to the shack or abandon the XYL for hours, I can listen and work digi modes without disturbing her or when she's gone to bed I can have voise QSO. I work PSK31 and Olivia with this setup too. With FLrig it's a lot easier to use and change bands and power etc but once used to it it's simple to use and all the heavy menu stuff is set once and forget. I had the Xiegu G90 and the 891 is a massive improvement, audio quality and receiver performance trash the G90, the audio via headphones is just amazing to listen to. If I was on a budget buying a first radio for the money the 891 is impossible to beat mainly for receiver performance and sound quality ( via headphones ) A tuner if needed does add to the cost but if got 2nd hand like I did the 891 is a fantastic radio and beats the pants off the 450D in performance and sound quality too, not happy with the Audio from the 450D at all, it's quite poor, the 891 vs 450D audio is night and day different also compared to my old 7300 the 891 beats that by miles in audio quality, again, via headphones, I'd have the 891 over the 7300 any day.

P.S. This choice was made because the HDMI standard comes with extra costs, that would have increased cost cost of the radio. Cheaper for you to fork out ~$10 for a cable.

I didn't really get the feeling it was, but it does look that way in the video. I'm sure with more time in front of the radio I'd be able to compile a list of likes and don't likes.

Not just the AF gain knob. It looked like all the small knobs were mounted on spring shafts. Makes me hope it's intentional, like a short "rubber" shaft segment designed to absorb shock. Or it could be flimsy plastic shafts. Disconcerting effect, either way. If I owned an FT-710 I'd carefully pull off one of the knobs first thing to see why they're wobbly.

Go ahead... you can say it! ;-)

@@HamRadioOutlet Ok I love it (well certainly what I have seen so far)

Many thanks!

Yaesu is not the only manufacturer to have problems with its LCD displays. Hopefully, they have all learned from their mistakes.

They were probably concerned with the connector staying connected. HDMI cables fall out or get destroyed easily while DVI locks in and has the same quality signal.

Agreed. That's one of my complaints about the FTdx10.

It is £1200 in the UK but already discounted by some outlets to £1100.

There's no import duty on radios made and sold in Japan. There is import duty for radios built in Japan and sold in the USA. There's also import costs to ship them here. There are also state and federal taxes, so it's not really fair to compare prices between countries.

@@HamRadioOutlet It's difficult to compare, and largely irrelevant, in the UK there is 20% tax plus import duties, the home market of Japan is different to the USA or UK.

For anyone thinking of buying it in Japan and shipping it to another country because it is cheaper, don't forget there's no warranty coverage when you do that! If it broke, you'd have to ship it back to Japan to get it fixed at your expense.

@@HamRadioOutlet That's true, but what I want to say is that you can buy it cheaply in your country due to the effects of the weaker yen and stronger dollar.

Being a relatively compact radio, it's easy to travel with. Having the detachable speaker with a janky cable connection rather than an integrated speaker is possibly a recognition of exactly what you're saying. Traveling, and on field day or at events you'll likely be using cans anyhow, so the speaker can stay home. If you want to put external amplification and quality audio transducers cause you like great sound, you can, and ditch the side speaker also. Seems to me it's just added value and front-firing has some advantages in clarity IMHO.

You are still in really good shape with the FT-991A. It has 2m & 70cm all-mode capability, which neither the FTdx10 nor the FT-710 have. The FT-710 is marketed as an entry-level radio, below the FTdx10. The FT-991A was introduced in, I think, 2016. Technology always advances.

I have the 991A and will not be getting it rid any time soon..... its just too dam useful having 2 meters and 70cm included... Not only that but it performs superbly an all the bands... A keeper for sure.. Its a shame the DX 10 didnt have the higher bands included.. oh well..

I think the side speaker is probably a little better quality and the enclosure helps also. The external and internal speakers are supposed to work together.

@@HamRadioOutlet Wow, that is interesting that they use both speakers at the same time. I assumed that plugging in the external speaker would disconnect the internal speaker. I'd love to see how this radio compares to the Icom 7300.

@@BryanTorok The "using both speakers at the same time"-thing is how the AESS works. You adjust the levels of each speaker to make the audio the most pleasing for your personal preference. An interesting concept. You can, of course, adjust them so that you only hear audio from just one or the other, or unplug the external speaker. It will be good to see how the FT-710 stack up against other radios, I agree.

Hahaha! Mine is in a frame in the garage. I don't really have a room with enough available wall space.

Go here: www.hamradio.com/detail.cfm?pid=H0-018101 Add it to your cart. Checkout. Simple!

@@HamRadioOutlet I am in Cambodia, I really have a hard time ordering, do not know where to buy

@@ravyvanna9030 I just gave you directions! Click the link I gave you, add it to your cart, checkout and pay. We'll ship it to you. We're no different from any other online retailer. If you have a specific problem tell me and maybe I can help you.

Thanks, though not really a review, just an introduction to the radio. 🙂

The FT-710 and the FTdx10 are different radios. If it comes down to the choice of the FT-710 or the FTdx10, you should probably go with the FTdx10. The FT-710 is a step below the FTdx10. Also, this wasn't a review, just an introduction to the new radio. 🙂

If you want a dx10 buy it now. The price will go up when the 710 releases.

@@HamRadioOutlet I agree they are different radios, but having a full SDR front end makes the rig interesting.

@@forgetyourlife I think the 710 is already released and I am unable to purchase anything until I return to the UK next year

The pure SDR won’t beat the hybrid technology of the FTdx10. 73, de N4HNH

One one on the back and one on the front... so you can chose.

@@HamRadioOutlet I should have thanked you for the review in my first comment. It was my first time actually seeing the set in the flesh. Now, about the key port, can you confirm that there is another key port at the front, like you say? I cannot see it. Only a headphone port. Thanks. EI3KY

@@donalfinn4205 Sorry... I was agreeing with your wish... it would be better to have one key jack on the front and another on the back, so you can choose. There is no key jack on the front of the radio.

@@HamRadioOutlet Thanks for that. Nothing to be sorry about. I can get over the key jack not being in the front. ☘️👍

Thank you!

My understanding is that DVI-D doesn't require a license like the others do, thus keeping the overall cost of the product down.

There is no audio to pass through and HDMI requires a license fee per unit.

I wasn't necessarily saying it should be HDMI. In fact, my thought initially was that it should be Display Port, which superseded DVI-D well over 10 years ago. It's a current standard and as far as I know, it's a royalty free VESA specification. I don't know about consumer grade, but pretty much every business grade monitor has Display Port natively these days.

@@mikeschmalz2031 Display port, HDMI, DVI, they're all the same thing. Just get an adapter to whatever your monitor takes. DVI is convenient because a lot of people have junk monitors from 10 years ago that use this standard that would be perfect to stick on a radio.

I think you're probably right!

Having the FTDX10 for about 2 months I have not opened the manual much. If one is familiar with typical rig terminology it is rather easy to work with the FTDX10. There are some issues to learn, setting up each band and mode the menu settings go with each band setup. Drove me nuts when going to a band in CW, but the BK-IN keying was off. And after selecting menu with FUNC it sets the knob for that function, set to CW SPEED then the knob stays with it. Just some small things that are different from other rigs. The calling of memories is easy, but did take some learning on how to use them.

"External video"? Do you mean, the display put on an external monitor? I was going to do that but ran out of time.

@@HamRadioOutlet Exactly. How the monitor looks hooked up to the DVI-D port. Thanks!

@@stuartross We gave the radio to Josh at Ham Radio Crash Course to do a full review. I'm sure he'll plug it in to an external monitor.

@@stuartross It won't look good, 800x600 resolution on anything more than a radio size screen looks poor, this is why there's no HDMI socket because it would be a waste of money. I feel that the 710 could have had a much smaller screen, more buttons and higher resolution out for waterfall would have been amazing but the FTDX-10 video output is the same. Still an amazing radio though and no doubt the 710 is too. Most radios have low resolution output.

Ah! Thank you!

i keep them folded and put away as i do not like the "fold" look in them. maybe one day i can find one that has never been damaged by folding it. only rolled up in a tube.

Correct. It is a step below the FTdx10. It is not meant to compete with the FTdx10, but to complement the line-up.

I have the impression that you lack knowledge. FTDX10 and FT-710 look similar? After all, it is normal that the products of the same company are similar in appearance, see cars of the same brand, they also look similar. Just because both radios look alike doesn't mean they are the same. There is a gap between the FTDX10 and the FT-710. These are transceivers of a completely different class: FTDX vs FT. The first is a great hybrid, one of the best receivers in the world according to Sherwood engineers, and the second radio is a standard model made as SDR. The loudspeaker for the FT-710 is not standard, you have to buy it just like for any other transceiver. None of the radios replace the other, because each is different and aims at a different recipient. Comparing the FTDX10, FT-710 or FT-991A does not make any sense because each of them is from a different shelf and for different customers.

@@Sylwester_Krolak Well I am not so impressed with your assessment. The FTDX10 and FT710 are very similar rigs, have almost identical specs. Both are SDR, but this only means their OS can be upgraded thru new firmware, mostly to fix bugs. And any upgrade is limited by what the rig can do. FTDX vs FT labeling means nothing other than Yaesu chose to call them that. This is no special labeling of the rigs, just Yaesu has stuck with the FT label. Their is a vast difference between the FTDX10 & FTDX101, the 101 is direct sampling, the 10 is not, 10 & 710 do the DSP at IF, not at the front end. The market for the FT710 is identical to the FTDX10, very little difference. And the FT991 tech is so similar to the FTDX10, main difference in the additional bands in the 991. HRO is giving the ext speaker with the FT710 for no additional charge.

@@n9eerptr To Your last point... the speaker comes standard, in the box. In my video, I didn't see it in the box as it was contained in a box that looked like packing for the transceiver.

This is an enbtry-level radio, one step below the FTdx10.

There was no headphone adapter (maybe there is not much call for it anymore?) in the box, but there is a spare fuse. It would make zero sense for Yaesu to use inferior components that break during the warranty period where Yaesu would have to pay for shipping and the cost of repair.

@@HamRadioOutlet Hmm perhaps you are right, but the worry is still there. maybe just fail when the warranty has expired like some TV manufacturers. Although I agree that Yaesu are not known for doing that.

all manufactures know about when parts will fail. that is why they have short, or otherwise unusable warranty's. as they do extreme testing on everything. just to find the avg fail point.

Maybe adjust the EQ on your computer speakers - the music is more than -18db down from the dialog track. The add-on speaker is just that, an add-on. If you don't want to use it, don't attach it, and don't plug it in. The FT-710 is a much newer radio than the IC-7300, which is pretty "mature" in technology terms. We will have to see what the reviewers say about the FT-710. This radio is not marketed as a portable radio. The FT-710 is a rung below the FTdx10.

@@HamRadioOutlet Thanks - yeah, that confirms my impression about it being a step down from the DX10. Interesting that the pricing as it appears today doesn't reflect that, but perhaps that will change when it's available.

@@chris.a.1 Don't forget, there are manufacturer specials on the FTdx10 right now. When the coupons expire, there's a $400 difference between the two radios.

@@HamRadioOutlet "the music is more than -18db down from the dialog track" I must agree with Chris A. I run into this frequently, even with professionally produced video. I have not so much a hearing problem as a audio processing problem. Undiagnosed ADHD or whatever it may be, it seems my brain tries real hard to make complete sense of *every* audio input and winds up failing at most of it. It's bad enough I grew up thinking I was anti-social because parties and any crowded (or plain loud) situation gave me great anxiety. Turns out its part of my brain going nuts trying to follow every conversation and sound queue. Music under voice does that too, but it doesn't have to - if the music is down to a completely, non-compete, low level it's fine and fills the empty space like it's supposed to.

@@Randrew Thats a good point. Music helps carry the video forward, which is why it's used everywhere in TV, video and movies. Especially in cases like this one, where I literally had 3 hours to get there, set up the radio, shoot the video and get home so that I could start editing and upload it to our social media platforms that day, the video clips were a bt "disjointed". The music, even at its very low volume compared to the dialog track, helps make the video clips flow. I probably could have found a better music track which wasn't so repetitive, but when time-remapping a piece of music to fit the video, sometimes you end up with even more repetitive music. ...And, I just didn't have the time.

That's QRM from every other store nearby! There's a laundromat next-but-one store away, for example, with dozens of massive electrical motors spinning away 12 hours a day. Every radio suffers from the same QRM.

Look on the results of the receiver comparison by Sherwood engineers. Two Yaesu transceivers in the top three in the world (the FTDX10 is the third receiver in the world). By comparison, the IC-7300 isn't even on the front page. I am sure that the FT-710 will have a much better receiver than the IC-7300, although it is only SDR. So there is not much to compare, except subjective feelings, but they do not matter much.

@@Sylwester_Krolak the 7300 has an industry quality a/d converter, but the ftdx10 (ftdx101d/mp same) has only a low quality cheap commercial a/d converter, accordingly the 7300 sounds better (clearer and more detailed). the sherwood website does not show a measure for that at all but other measured values of receivers, accordingly that sherwood page is not telling the whole truth about how good these recivers really are. you and alot of other people are (apparently) not aware of that. the ftdx10 is much more immune against inband strong signals, i admit, but the ft710 on other hand has no roofing filter and no preselector either, so that advnatage of higher immunity against strong inband signals will (very likely) not be excistent in the ft710, at least the 7300 then sounds better for its higher industry quality a/d converter as i write in the beginning of this comment. i would then rather have the better sounding 7300. i want to hear side by side comparisons on weak ssb voice signals in bother receivers, the 7300 and the ft710, together with strong signals on the side too, that will then tell which one is better in what regard.

@@Sylwester_Krolak I judge a radio by the receiver performance and audio quality, the 891 is right up there and the FTDX-10, Yaesu have nailed it when it comes to audio quality. I had the 7300 and the audio quality used to wreck my head, I had to have NR on all the time and it effected the sound quality, I live in the country with little to no qrm and the 891 beats it by miles both on receiver performance and sound quality via headphones, I always listen via headphones, you can capture weak signals in a way not possible with speakers, to my ears anyway. Now I have the FTDX-10 and it's an amazing transceiver, not perfect, yaesu could have done better in some ways such as allowing live typing with keyboard for RTTY and PSK31 rather than use macro style messages. Allow the mouse more control, have high resolution video for large screen, the video out looks horrible on large screen with 800x600 resolution, this is dumb. But the FTDX-10 is an amazing transceiver so no doubt the 710 will be too. As a FT-450D replacement I would not consider the 710 that because it's too expensive, the 891 is a fantastic entry level radio and it beats the pants off the 450D on receiver performance and sound quality.

Unknown at this time.

@@HamRadioOutlet tks for responding. We'll see in coming weeks .

IC7300 is direct sampling DSP and yes can overload the front end although I seldom have an issue with it. The FTDX10 and FT710 is not, they are IF DSP, 1990s tech with improved DSP. SDR simply means can upgrade the software. I do like my FTDX10, but IC7300 has more operational features and easier to use. The large menu in the FTDX10 is not so friendly, continuously having to go to it. But that has been Yaesu's approach for years like with the FT991. I do like the speaker mounting on the side of the FT710, is different.

@@n9eerptr thank you for your thoughts . I know my priority of having a good working RF gain control is overlooked by many hams . Some even think it is simply a 'mute ' control? Especially in very general noisy environments, however if like me you are used to the benefits of a proper working RF control, using it to lift the noise floor on top band people would start to see the benefits? Only if all they have for reference is a high general background noise and a icom ic 7300 i can understand why they think of a RF control is simply a mute control ? I still like my icom ic 7300 in every other respect , and is much more user friendly than the ftdx 10 that my friend has (he also has the ic7300) but the dx10 RF control just works ! The ic7300 is indeed a mute control. Hopefully this new ft710 will be similar to the ftdx10 in operation ? My understanding was the new ft710 is not hybrid like the dx10 ? So my concern is it might perform like my ic7300 which is very poor in lifting the noise floor (it doesn't it simply attenuates) Especially on low bands ? We will see in the coming weeks all about the pro's and con's . Tks again for your feedback.

@@robduncan599 I see the RF gain in the IC7300 as an attenuator, it does decrease the signal along with the noise as the S-meter indicates. I would suspect this is done because of the direct sampling and ADC conversion. The DSP remains in full operation. The IC7610 functions the same way. So does the RF gain in the FTDX10, it does reduce the gain of the front end with increasing the ALC voltage, just the S-meter continues to show the max level of the received signal, but the noise is greatly reduced, a most liked feature. But what I like most about the FTDX10 is the knob for adjusting the IF bandwidth and adjusting the band pass. Having quick control of these offers some advantage in adjusting for better reception. I use them a lot. I was looking for the adjustment on the FT710, maybe a menu items. Question for you, what do you mean by hybrid??? In the old days it meant part of the radio was solid state with some tubes, usually in the final. Of course not what it refers to today.

Hahaha. Not too many, I hope!

That was not the purpose of this video. The video was to introduce people to the radio and show it off. There will be other videos that are an in-depth, deep dive into the radio (see the Ham radio Crash Course channel, for example). I only had access to the radio for less than 3 hours, which isn't long enough to learn about it and shoot a video of it. ;-)

Well Dick...that's why the title says "First Look". It's not a deep dive into the radio.

It's not sold out. It hasn't arrived yet. It's a new radio and all retailers in the USA are taking pre-orders.

@@HamRadioOutlet you gave the impression that they were available to buy not preorder. Especially since you’re in possession of one. Just sayin’.

Sorry, but I don't have any information on the MARS mod for this radio.

While the discounts are still available.

@@Bdub1952 Exactly. After that, the price difference is $400.

I don't think so, but I didn't get a chance to look at the radio in-depth. I've heard Yaesu say that they don't believe in averaging -ask John Kruk for details.

@@HamRadioOutlet "Don't believe in averaging"? Very strange, it's real , and much easier on eyes, and very soothing :-)

@@sas7388 He gave a reason. I don't remember what it was.

The music was -18 dB down from the vocal track. Yiu may need to adjust the EQ of your speakers!

HRO keeps replying about how the music is -18DB down, and blaming the critics. But really, it was awful distracting dreck. Don't get me wrong, I love HRO as a business. But if I walked into a store and that stuff was playing, I'd leave :)

I agree! 18db down? B.S.! It’s loud, annoying, distracting, and useless. What is it with KZfaq creators constantly adding this noise to their videos? Do you think we’re too stupid to watch if we’re not constantly bombarded with music. At about 1/3 of the way into the video I dumped it.

@@w9fcc Yeah, I actually am on the KZfaq Production learning curve (the low end at the moment), and I've seen recommendations for 25-30DB down, but I can see it being very much a matter of taste. It can be done well in some cases, but sometimes, silence is best (and easiest). I believe given the informal presentation style of this video, not to mention the target audience, the music was the wrong choice. On the other hand, I guess it's fair to say that, just because we don't care for it in this particular case, it's still a valid style choice. Just one I wish was used a little more selectively.

Tambien

It does not. The fan is at the back of the radio and the opposite side is still open.

That question has been asked and answered so many times here in the comments. Short answer: HDMI has a per unit license fee. There's no audio passed to the external monitor. DVI to HDMI adapters are very cheap.

@@HamRadioOutlet I mainly asked this Question because a. Resolution capacity of d-sub has been at/past 1080p for the 10--13 years sub 4k 5-8 years b.I don't use pc monitors any more for display these days only 2 inputs i have on idiot box which none have dvi input, haven't seen a capture card with either d-sud nor dvi input ever c. Have had wireless monitor pairing in iOS/windows/android PC/tablet/phone in 1 form or another for at least for 5-6 years now with bluetooth pairing you could even pair ya hearing aid to a ipad, phone, within the last few update to the sony x 1 tv directly.. I was merely asking why i we still stuck to a dvi/dvi-d connection when either 2 d-subs could be functionally use or 2 hdmi/mini hdmi could be used with the light of some radios coming with 4g-lte-a or even 5g could be functional call medium I would dare say with data rich broad band environment where data is a need as a whole I can the grand daddy of pc chat tech being used like mirc/discord/paltalk/rw with huds becoming a commercial reality within motor vehicles I'm looking at braille and deaf communities need either access to reserve comms with text messaging across amateur/commercial/cb comms of pending visual status of the general area they live in..

Sorry you had problems with a radio that was discontinued in 2014. The problems you had with a 2002 vintage radio are unlikely to transfer to this new radio.

Funny.

Lucky me, my sister gave me her old Dell 24-inch monitor, complete with DVI connection, lol.

Pedantry: Both USB-A and USB-B are current gen connectors. It's the miniaturized connectors that have gone through a few revisions.

You can put the speaker on either side. How many times do you need to take out/put in the SD card anyway?

You can clearly see the internal speaker in the 360-degree clip at the end of this video. Don't know how it sounds though, I didn't try it!

Dunno. I'm sure Yaesu hopes not.

I was demonstrating the touch screen, as I said in the video, right before pressing the on-screen buttons (5:08).

It's going to be at least $400 cheaper when all of the FTdx10 coupons expire?

I own both . The 710 makes for a much better portable rig because it only draws 1.6A instead of 2.6A on RX. It also weighs 1.5KG (5 pounds) less, and is easier to operate in the field because the front-panel is less cluttered with large rubber buttons. The ATU tunes much wider too, the DX10 refuses to tune wider than 3:1, and the 710 can match 5:1 - again useful in the field when running temporary antenna installations.

It's part of the AESS system, so yes, it comes withe the radio. Or you can buy the FT-710 Field version, which does not come with the external speaker (and therefore does not have AESS until you add the external speaker). You can always follow the link in the description and see exactly what you get.

That would be interesting to see. But would also require a firmware update, probably?

@@HamRadioOutlet I would think so.

I like physical dials, switches and knobs too... even though they are more likely to fail.

@@HamRadioOutlet HA HA HA you are funny. Failed hardware vs failed software. This is a new debate. We should talk about this topic. Just ask Microsoft and Apple.

@@DavidS-iw4ei Very easy to replace software. I've update the firmware on all my radios at least once. 🙂

@@HamRadioOutlet Got you, now we need to do firmware updates. Yea I think I'll wait 2 to 3 years and see how the radios works out. The FT-897d had a run of 14 years. FTdx10 is only less then 3 years. ???

For full information about the radio, go to the Yaesu website bit.ly/3DUiU60 See the link in the description for pricing, as prices change.

@@HamRadioOutlet Pues la Banda de 70 Mhz. No RULA o Funciona, PORQUE ESTA VACÍA y los Radio Aficionados, No Montan Antenas para las Bandas o Frecuencias de Radio/Control en América, La Yaesu Ha Perdido el NORTE, NO HAY TAMPOCO Antenas, Ni los ACOPLADORES de Antena Necesarios. Así que MUCHO Bla, bla, bla, Pero se Jodio la Industria de, los Electro-Domesticos Con el FT dx 5000 MP Reforzado con el FT dx 3000 MP para HF y 6m.... Para otras Bandas, Ya Tengo Mas Que Cumplido Servicio.

It's not a review, it's an introduction. The music is -18db down from the dialog track. Might be time to properly adjust the EQ on your speakers.

@@HamRadioOutlet just point of view no need to be rude won’t be watching you again

It's the same size, as you can see in the video), but of course, the FT-991A has VHF and UHF as well as 160-6m.

@@HamRadioOutlet interesting, some have thought the FT 710 might be replacing something current, but that sounds incorrect. For me, the FT 991 may be more useable due to all the bands available. If/when I do go to buy, I'll be contact HRO Woodbridge, where I've bought before. Great info and thanks. 73s K9DWB

@@DeltaWhiskeyBravo13579 John Kruk from Yaesu said the FT-710 is not replacing any radio in their line-up, but is an addition, so your thoughts are correct!

This is an entry-level analog radio. There's no C4FM at all.