Use DISCOUNT CODE BDF5 for 5% off your entire Yak Power set up. Buy it here 👇🏼 Yak Power Switching System - bit.ly/41FZ3jo

Nice job on the install. Not sure about front lights though, should be navigation lights, a green and a red instead of 2 green.

Great video brother! One tip I saw in another video is to keep all the plastic shavings when you drill in a ziploc bag. That way it you have to fix a crack/hole, you have plastic that matches perfectly!

I installed my YakPower system 3 years ago already... I use "" for my fish finder, "B" for my forward and aft YakPower green LED external light strips, "M" for my 10 Sunpie rock lights (turned for music I might add), "S" for my stern light, "2" is for dual 12v ports, dual USD lights and LED power display. Running a 36 lb. Rear mount salt water rated trolling motor, power control module for the trolling motor, 50 watt 1.1 aH solar panel on my milk crate box with a 54 aH Dakota LiPo battery... on a sunny day... I never run out of power and still have plenty of power for lights and trolling motor for night fishing. I bought a Big Fish 120 and she is an awesome yak… but I had to install a 4” inspection port to do all the wiring from… it was a chore for sure

Congrats man. Looks amazing 🤩 It hurts with every hole drilled in the boat but the final result is awesome. Keep it up brother. From a dad kayak fisherman from qatar 🇶🇦 Fish on ❤️

Thanks for this video, I actually done my light install based off of this video and made my life so much simpler 🙏

good stuff.. I am about to put mine together!!!

that was a roller-coaster of thrills video watching you do that to your oldtown I was biting my nails nervous, but man, final result looks amazing. I'm gonna be looking to do lights soon too so I've now got some great guidance. thanks for another awesome video.

Dielectric grease those wires BEFORE crimping! Shrink wrap only hides the corrosion.

Great video, and it is out together nicely making it enjoyable to watch. Couldn’t stop and thanks for sharing. Tight lines.

Dude, I love the button Lights. Yakpower is awesome, I'm installing the 8 port unit in my Yak. I hope my install comes out as well as yours. Another fine vid from B-Dad.

A couple professionals at work here! I really need to dial in my kayak wiring and such but will probably wait until the off-season (when the lakes freeze over) so I’m dialed in for next year! Good job guys! Looks clean!!

Great video. One of those solid options - lights. I will to see if you did one on deck mats. Thanks for the video!

Another excellent video Mate very much enjoyed by the Grand Dad from the land down under.

Nice look with the lights. I have to install a anchor system and have been holding out because of the drilling into my Tenton 😂

That's a great video and hooking up all those lights. You've given me some good ideas on how to go about doing mine. Thank you very much

Hi from puerto rico congratulation for your show is amazing. Me and my kids watch your shows. God bless you and your family

great video, added to my save list so i can watch when I get my 1st kayak.

Always look forward to seeing your awesome and informative videos, oh love the dad jokes too

lol thumbs up for the WOOOOOOO from nature boy rick flair LOL

That looks so sick!!

Love it man!!!! Awesome and clean work #FoShow !!! Do you have another video show the lights off???

Nice job you guys. Totally agree about zip ties and duct tape.

Those are some clean looking lights.

This is exactly what I want wish I had a furn here in tx lol awesome video bro!💪🏽

Knocked another one out of the park Brother, great content.

Keep up the good work bro!

Damn wished i had u guys here in Denver Colorado lol i need me some one to install my old town

Awesome video, step by step which is what I needed. I have a trolling motor on a 100AH battery & fishfinder on a Nocqua battery. Which should I use for the lights.

Very cool my friend. Sweet setup!

Nice job! One note not dissing, I noted you used shrink wrap on the round connectors from the light, I would also shrink wrap the SAE connectors too. Dielectric grease them then shrink wrap the connectors. Ask me how I know, they are not waterproof no amount of dielectric will water proof them, I also used the grease on the connectors your green lights plugged into outside the yak.. You will be thankful you did. Also as someone stated save your drill shavings for future repairs. But nice job.

Good job guys 👍😎

Great job..........im scared as hell to drill also......but looks great

Thanks for posting this on the Facebook Kayak DIY page. New sub here!!!

Good job guys

Great gear and install! Side note: A vessel operator should not have white light in any position that it can shine in his eyes. It ruins night vision. Red light is the preferred light to impact night vision the least. My cockpit button lights are under the seat, shining forward and are blue light instead of white. If I need more light and install them forward of me I'll add red. Your yak is looking killer. Thanks for the vids.

Excellent !!!!

I think they should have had nutz on the back side of the round lights then no worries on stripping the threads in the plastic, and I would have cut out all the extra wire spliced it back together I would try and keep the weight down and that Velcro tape seems to not hold for me alcohol wipes doesn't matter lol anyway I enjoy watching you're show. Milwaukee

Thanks to this video I save lots of money I di my native watercraft titan

Bow lights are red & green, that wood will rot and don't use bathroom silicone caulking.

Great install. I live on the east coast as well and not many great installers around me either

Bro…first thing I see is a 24 minute video and I’m thinking, “I love Jay’s channel but no way I’m watching the full 24 minutes.”… …I watched the full 24 minutes. I can’t believe how well your videos flow man. The combination of your voice and the angles. So tight. Anyway, I’ll stop drooling all over your video skills and get back to the install: So clean, bro. Fern is the man. You’re lucky to have such a knowledgeable guy helping you out. I hate drilling holes in a kayak, especially where you did for the LED lights, but it was done right and you’ll be good. Looks so good man. I think you spent more for the install than what I paid for my kayak 😂 And tell the monkey I said, “Sup Fool” back to him 👍

great install .. how is the Yak Power 5 circuit wireless switch holding up? would you recommended (i don't see much review on Amazon)?

Awesome job but I will say one thing those lights are having constant contact with water and I'm curious to see how long they'll last. I put a set similar but higher up and still get lots of water contact. I'm fishing mainly salty water in the river up here on the east coast. I've yet to put holes on my old town due to warranty concerns but seeing these mods makes me want to take that step. I'm in NJ if you're willing to link up and do some fishing for striper bass this season let me know I've been hammering them!

can i hire him

Awesome install is there anyway you can list everything you needed for this install thanks looks great can’t wait to do mine

Duck tape, zip ties, and 50 mph cord...That what i was told by a military 🪖 guy before.

What would things look like if the lights were a little lower, just under the waterline? Really considering this kit for a new dorado kayak

Awesome installation-where is this guy?

@beardeddadfishing Do you think those same lights and a Garmin Striker 4 CV can be run off a 10ah lithium battery? Awesome install video. Looking forward to installing on my Sportsman 106mk!

Aren’t u required to have red port and green stern lights up front? Or is it different from place to place? I’m in Canada so …

First off great video! everything seem to go in very easily in the yak power system… Quick question did you find you needed to get any additional wire for the SAE connections? also, yours looks like a wireless option. How’s that been working for you? I recently picked up the wired version and I’m on the fence as to which one to go with now that I saw your video. Thanks again great content …liked and subscribed . Bob

How do you like the cockpit light placement? If you could do it over again would you place them in the same spot or would you move them? 🤔

Outstanding video! Was it pretty easy to figure out everything you needed to order? You were very clear on everything and the camera work was great! Did the battery finally go under the seat also?

So your bow running lights are both green. Right should be green and left should be red. Also you should have a white light at the stern. Coast Guard regulations. Nice install though.

Now that the lights have been installed for some time, have you had any problems with the lights being so low on the water line?

I have the same kayak as you but the Orange and black one can you send me the info on your link of where I can buy all that stuff too

for the bow lights, isn't one supposed to be red and the other green?

Nice, do you feel like the button lights are hard on your eyes or too bright at night?

Nice job. What about the most important light. The Stern flagpole light?

Did he cut the battery terminals?

Just don't take it out on "any" navigable water at night cuz your "illegal" with greens on both sides.....

So you couldn't cut those marker lights to length are they like fiber optic or something

hahaaa yeah ONE other thing how did you get the cables through the hull from bow and mid with no hatches, coat hanger wire ?????

is the drill bit size the same for both the button lights and the bow lights?

Nice ! I think im going to find some. I have navigation lights already. Does the water short them out? I have some on my car and within a few months they were blinking and coming on when they wanted to 😂. So I cut the line. I have some heavy duty ones so they looked like 😂

Is there any certain reason for putting the navigation lights 1 inch below the edge of the kayak? Could they be installed on the upper part where your KZfaq stickers are?

Don't the navigation lights need to be green and red?

I have a question. When you push a button to turn something on will it turn off the other items? Lets say I want t keep my fish finder on but I want to power on my powerpole or lights?

I just installed some sae connections to move my battery box and cried when I drilled a hole in my kayak. I have the pdl120 as well. 1 question shouldn't you have 1 red and 1 green light in the front?

Cool modification. How close is F Train to central Florida. Thinking about adding a fish finder and running some other electrical

should be red and green in front ?

Looks great!! Have not drilled into my kayak yet kind don't want to. Thought it was pretty sweet was going to be the first project where I actually drilled into my yak unfortunately after pricing it out on the amazon it came in way above my paygrade at a whopping 700+ dollars mostly cause everything says yak attack on it. I feel like its way overpriced project.

I’m the Heat Shrink Butt Connectors they don’t have the same color as urs

Yak power says it has an app for it. Did you try it? Does it control the lights instead of having another thing in the way?

What connection wire did you use to power the garmin?

I just bought an AutoPilot from a friend and he installed this same lighting system on it with green on both sides of the bow. I just ordered the red/green kit to replace it. I might install the green lights on the stern in the future. The red/green kit has the 10" strips, where as the green kit is 20". What's the best way to fill in the screw holes from the ends of the 20" strips?

I was under the impression it had to be red and green in the front. Is that not the case?

I see you did green lights. Can I ask why you didn't do a green on your starboard and a red on your port?

Great install! How do you like the Yak thru hull seals, any water leaks? I went with the wilderness systems thru hull kit on my pdl120.

Can someone help me every time I connect the lights and try to turn them on it blows the fuses

Hello. I love your videos. I just got the same kayak and I have a question. When you plug your go pro into the USB to SAE plug, doesn’t water get into or affect the USB port itself? I know the plug is designed to be waterproof to your kayak, but I’m talking about the actual USB port on the end where the go pro gets plugged into. Does t that get wet or anything?

Do you think the 3m adhesive will withstand temps above 120°F?

Think you screwed up on the front lights....

Why both lights are green. I thought one should be red and the other one green

Oh yeah I nearly forgot that battery is bloody HUGE mate why so big and expensive couldn't a couple of 12v 12 ah batteries be just as good and more flexible ?????

Where do you put your battery

Are those light waterproof, your installed seemed at/below the waterline.

Can't seem to find 20 in Bow lights in Red and Green. Only the 10 inch come Red & Green. Any suggestion?

I see you have links but do you have an estimate on what you spent on all electronics? Battery, fish finder and light setup?

Does this stuff work on BKC