Yamaha Drive/Drive2 Schafer Solid Axle High Speed Gears Installation

Рет қаралды 4,259

9 ай бұрын

This video goes over how to install our high speed gear sets in the Schafer solid transaxles that can be found in the 2015-2016 Yamaha Drive G29, 2017-current Drive2 non quietech models, and some of the Adventurer models. Installing these gears is a more difficult task, but can be done with a good set of hand tools. Please check out our website below to find these gears and tons of other great Yamaha parts. Thanks for watching.
Check out our website for Yamaha Drive and Drive2 parts and accessories - powerequipmentman.com/
Yamaha Clutch Kit - powerequipmentman.com/product...
gear oil - powerequipmentman.com/collect...
High speed gear sets - powerequipmentman.com/collect...
RTV black silicone - amzn.to/3lwnPAm
Cleaner/degreaser - www.rockymountainatvmc.com/pa...
Long funnel - amzn.to/3aygHNy
By using the affiliate links listed above, I may earn a small commission from your purchase at NO additional cost to you. Your support from using these links helps our channel so I can continue to bring you more content!
#yamahagolfcart #yamahadrive2 #yamahag29 #yamahagolfcar #bestgolfcar #golfcartlife

Пікірлер: 15

@AaronS11979 10 күн бұрын

I bought a G22 with some water intrusion issues and as I'm replacing all the transaxle bearings and seals this video was invaluable. Cleaning the nasty brown (rust/water/gear oil) sludge is a pain, but my biggest concert is in hoping that the light pitting on all the internal gears from the surface corrosion isn't going to give me problems long term. Never the less. Having this video was nice in seeing how everything comes apart and goes back together. Thanks.

@PowerEquipmentMan 10 күн бұрын

Glad it helped. Thanks for watching!

@MrNiceGuy500 6 ай бұрын

I just got a fleet cart with that rear axle. I need to do this sometime. What happens if I combine this with lithium?

@PowerEquipmentMan 6 ай бұрын

The gear set that we sell and show how to install in this video is for GAS carts only. We do not sell any high speed gears for electric carts.

@cjshort5412 9 ай бұрын

Just picked up a fleet cart with this same rear end and I’m having trouble finding a lift kit for it. Any suggestions? TIA

@PowerEquipmentMan 9 ай бұрын

powerequipmentman.com/collections/suspension/products/yamaha-drive2-solid-axle-madjax-king-xd-4-lift-kit

@jamestm86 2 жыл бұрын

Hi Jonas, are there any compatible transaxles for the 2015-2016 Yamaha g29 that are more reliable? Research shows that the intermediate shaft in these trans are really crap. Thanks

@PowerEquipmentMan 2 жыл бұрын

I am not aware of any issues with the 2015 and newer transaxles on the G29s. That same transaxle is still used in the Drive2 non quietech models and the UMAXs. There was an issue with the input shaft on some of the early model G29s from around 2007-2009.

@jamestm86 2 жыл бұрын

@@PowerEquipmentMan They may have just updated the Intermediate shaft that holds the forward and reverse gears then. I have seen some photos on forums of it in pieces. Just not sure when they updated the intermediate shaft.

@jeremynguyen2346 9 ай бұрын

@@PowerEquipmentManhow are you

@Lumpia_In_Texas 9 ай бұрын

How does the rally ride compared to the drive 2?

@PowerEquipmentMan 9 ай бұрын

@@Lumpia_In_Texas the UMAX models are going to ride rougher than the Drive2, especially if you are comparing it to the Quietech model with independent rear suspension.