Yamaha FZ1 (2006-2015) How To- Clutch Removal| Part 2 - Can We Fix It?
Рет қаралды 4,838
Күн бұрынTrying to fix my 2008 Yamaha FZ1 that has a whine noise. How to fix a motorcycle. How to diagnose a motorcycle engine noise. DIY mechanic. Full Step by Step 2006-2015 Yamaha FZ clutch removal, clutch boss removal, clutch basket removal, clutch bearing inspection. Can We Fix It Yamaha Diagnosis and repair series. Part 2 How to replace your clutch, clutch basket, and clutch bearings.
@jhernandez77794 25 күн бұрын
Going to be pulling my clutch and replacing disk for first time. Wish me luck. Major clutch slip at only 24k miles. Not abused. And a horrible clutch rattle
@grimsmotovlogs369 25 күн бұрын
good luck! You can do it! Be careful going back together with the clutch cover and pull lever, getting them lined up correctly is the hardest part of the entire job.
@DeWoodysShop Жыл бұрын
The special tool bit made me 😂. Another way you can make a clutch holder if tou are in a pinch and replacing the clutch disk anyway you can bolt or rivet four plates together (two outer two inner) and it makes a great clutch lock. Did you figure out the noise?
@grimsmotovlogs369 Жыл бұрын
oh that would make a great holder! I need to start saving parts so I can make tools with the leftovers lol I haven't figured out the noise yet, I've been pretty busy with some other stuff lately. Hoping to get further with it this weekend. But I'll have to see.
@toothlessreptiles9283 9 ай бұрын
Had the same issue. It's that chain on the oil pump. If you grab a new one and throw it on you'll see the difference. There's way less slack in a new one. That chain smacks the guides. That's what mine was anyways.
@grimsmotovlogs369 9 ай бұрын
Really?? I swear it sounds like its coming from that area! I debated replacing it just while I was in there, but I thought for certain it was the water pump. I wonder if its possible to do the chain without pulling the oil pan. You wouldn't happen to know? Id be interested in maybe replacing it this winter if all I had to do was pull the clutch basket.
@vikingbiker 4 ай бұрын
Dude did you just pull out a steel covered in oil abd hey oh surface rust hahaha wtf mate 😅😂😅😂
@grimsmotovlogs369 4 ай бұрын
hahaha yeah, its not really what you want to see when you open up a motor lol
Yamaha FZ1 (2006-2015) How To- Clutch and Basket Installation (Step By Step)| Part 7- Can We Fix It?
Grim's MotoVlogs
Рет қаралды 3,1 М.
AnythingAlexia
Рет қаралды 17 МЛН
Grim's MotoVlogs
Рет қаралды 3,2 М.
Grim's MotoVlogs
Рет қаралды 6 М.
Grim's MotoVlogs
Рет қаралды 1,8 М.
StaggwoodDog
Рет қаралды 9 М.
Grim's MotoVlogs
Рет қаралды 2,5 М.
MotodartTV
Рет қаралды 1,7 МЛН
ПОТОК AI
Рет қаралды 3 МЛН
Official Hasnat Gamer
Рет қаралды 4,2 МЛН