What do I unplug to make it rev out ? Do you have a video ?
@ajvdub4 жыл бұрын
Mason, how about the float bowl screw, should that run all the way in? If I back it out a bit, it starts to spit fuel out of the overflow. Great video!
@MasonGeorgeMotorcycles4 жыл бұрын
Aaron Van Wagner yes run that screw all the way in, the purpose of it is when you store the bike if you turn off the petcock and drain the gas that’s in the carburetor. Only something you need to worry about if you’re going to store the bike for more than a month. Thanks for watching👍🏻
@rickygeddes65324 жыл бұрын
What ones do you unplug to make it rev out thanks in advance
@TripleD-TheKid443 жыл бұрын
any idea how i can adjust the oil pump? i am getting too much oil through the exhaust
@jasonburdorff52835 жыл бұрын
What was the trick to stop the fuel from coming out of the spark plug opening? New plug? More torques?
@MasonGeorgeMotorcycles5 жыл бұрын
Jason Burdorff I just tightened it up a bit and it stopped.
@Gordy50443 жыл бұрын
I thought they couldn’t throttle up when in start, only in run??
@calumconger76294 жыл бұрын
Got my friends old pw50, cleaned the carb but I still can't get it to idle right been working on it or about a week now
@MasonGeorgeMotorcycles4 жыл бұрын
Calum Conger I would replace the Jets sometimes those tiny jets are impossible to get clean if the bikes been sitting for a long time... if the carburetor is truly clean and you have a good fuel and spark it should run no problem. Good luck
@Shooter_Mcgavin934 жыл бұрын
Just rebuilt one of these
@maxcrossland10223 жыл бұрын
I just got one of these for my son and it’s spitting oil out the exhaust after a few rides. Any idea why? I did add oil this morning that’s all I did different. Was not spitting oil before!
@MasonGeorgeMotorcycles3 жыл бұрын
The oil that spitting out the exhaust is from the two-stroke make sure not the transmission oil so you might have overfilled the transmission... I would check the packing, if the exhaust packing is old it’s probably not soaking up any of the oil and you need to re-pack it.
@tashalucas22434 жыл бұрын
I need help with my Yamaha PW 50 please it starts up without starting fluid but sometimes it needs it but even when it needs it it will only stay running for about two seconds and it won’t revI have a new carburetor new ignition coral new stater new head new piston I just don’t know what’s going wrong with it if y’all have any ideas please help me thank you
@MasonGeorgeMotorcycles3 жыл бұрын
Sounds like a tuning issue. Also check for air leaks.
@alvaromaya66826 ай бұрын
Que tal amigo descubriste el problema me pasa lo mismo
@alvaromaya66826 ай бұрын
@@MasonGeorgeMotorcycles como puedo saber si es un problema de sintonización
@Cooow3 жыл бұрын
What year is it
@bradleyschroeder82005 жыл бұрын
My pw50 is running like crap if I want too start it I have to some gas in the spark plugs hole and it will start and the choke has too be on for it too run how do I fix that
@MasonGeorgeMotorcycles5 жыл бұрын
Bradley Schroeder clean the carburetor!
@PNWTone4 жыл бұрын
You seem like a cool dude. Also I think I have the same bike different color. But with the same 2 stroke carb. I need help. So when I got the bike it sounded like shit. So I went down to the local bike shop and said, “I don’t know a thing about the make, model or year of this bike but I need a carb kit please.” He said, “ said it was a pw50. And gave me the kit. (What I’m about to say next may not make sense because I don’t know motorcycle parts. Haha ) I cleaned the jets of the carb and JAMMED the gas and oil cables back into the carburetor and forced the carburetor closed and screwed it back together. My friend had to pry one of the cables back out. He told me I was supposed to line the part that slides into the carburetor, up with the single straight thread so when I pull the throttle it slid up and down lets gas into the carburetor. Well since we put it in the right spot now. My carb isn’t getting gas the bike used to work before I tried to replace the carb kit. Should I buy a new carb kit or do I have to buy a new carb since I may have ruined it? Or what do you think? Please help me!
@MasonGeorgeMotorcycles4 жыл бұрын
WashingTone my best advice would be to take it to a shop, you’ve probably already done more damage than was originally wrong with the bike.
@PNWTone4 жыл бұрын
Mason George Motorcycles thanks man. I’ll do that. Thanks for the video.
@AaronMartinCOOLVIDEO5 жыл бұрын
It's funny how you can pick up a lot of bikes that are in poor running condition and all it takes is a little bit of TLC and WD-40 to bring them back to life and make them run and look good again. Without spending a whole bunch of money on it.
@MasonGeorgeMotorcycles5 жыл бұрын
Aaron Martin TV this one was actually a customers bike, even better I didn’t have to spend any money lol
@seth0528.3 жыл бұрын
Is that an oem carb?
@MasonGeorgeMotorcycles3 жыл бұрын
Yes
@jamesbailey97522 жыл бұрын
Runs like shit
@MasonGeorgeMotorcycles2 жыл бұрын
Coming from the clown watching how to videos on KZfaq