Yamaha R6 Project - Removing The Engine
Рет қаралды 14,766
5 жыл бұрынI decide it's time to take out the noisy engine in the R6. This is a job better suited to two people so attempt this at your own risk alone!
Tom's Tinkering and Adventures would like to thank you for joining me in my adventures! Comment, Subscribe, and most of all, be inspired to live your own adventure when the time is right!
HELP SUPPORT THIS CHANNEL:
I hope you enjoy the material that I offer, if you would like to support my channel there is a link below. Take note that it actually goes to my wife's account! She supports me in my adventures. Bless that woman!
DONATIONS: www.paypal.me/TravelandAdventure
FOLLOW ME!
If I'm on a motorcycle adventure, I take my Spot-X GPS tracker with me. It allows my family and friends to keep up on my progress and see where I'm at. The link below will be updated every time I get ready to go on a trip.
share.findmespot.com/shared/f...
@billbonu1639 7 ай бұрын
Sometimes you can take the front wheel off and header and let it rest on the oil pan then raise the bike up off the motor and lower the bike back down over it when putting it back in.
@TomsTinkeringandAdventures 7 ай бұрын
Yeah, that might have been the way to go!
@waynestalnaker47 Жыл бұрын
I'm getting ready to tackle the same job on a 01 r6 so fun. Thanks for the inspiration
@TomsTinkeringandAdventures Жыл бұрын
Get a buddy to help! It’s possible by yourself, but it’s much easier with two.
@waynestalnaker47 Жыл бұрын
@@TomsTinkeringandAdventures I definitely won't have any help but I have loads of tools and time lol! Thanks for the advice
@Krieter27 3 жыл бұрын
Hello from Michigan. Great videos, informative and enjoyable.
@TomsTinkeringandAdventures 3 жыл бұрын
Dan Krieter thank you!
@meh6953 4 жыл бұрын
Thank you for the informative video.
@TomsTinkeringandAdventures 4 жыл бұрын
frank Zmonster I hope it helps, or better yet I hope you don’t have to remove an engine.
@meh6953 4 жыл бұрын
@@TomsTinkeringandAdventures I'm about to pick up a 2007 R6r for 1K with a dead engine. Hopefully it's a cheap fix and get her running.
@TomsTinkeringandAdventures 4 жыл бұрын
frank Zmonster good luck, let me know how it goes.
@mobimasudi5891 2 жыл бұрын
Hey first off great video and thanks for the information. I wanted to see if you were able to locate the coolant temperature sensor. I was able to identify where the thermostat is based on your other video, so thanks for that!
@TomsTinkeringandAdventures 2 жыл бұрын
Well we no longer have this bike so I can’t look at it. A lot of times the sensor threads into the radiator or near the thermostat housing. Should be easy to notice, with a small wire harness of 1-2 wires.
@david199619 4 жыл бұрын
The front sprocket nut coming loose was a common problem for these bikes. I found this out when mine was missing as well. They apparently came out with some sort of recall for it at some point.
@TomsTinkeringandAdventures 4 жыл бұрын
david199619 interesting. I guess I better have my son check it. Still running good!
@Shankower 2 жыл бұрын
@@TomsTinkeringandAdventures Way late, but mine undid itself during a ride, and consequently the front sprocket slipped off it's fitting and onto the threads. It was a weird sensation being in gear, revving the mess outtta the bike, and it not going anywhere. I cringe thinking about it now, but the revving spun the shaft with the newly loose sprocket sitting on the threads.. wore them down dangerously flat.. Never did find the nut. And I nearly cried tears of joy when the new nut was still able to screw unto the funky threads lol.
@TomsTinkeringandAdventures 2 жыл бұрын
@@Shankower wow, what an experience! Glad you didn’t have to split the engine to fix that! It really should have a secondary lock on that nut!
@alansterling3481 5 жыл бұрын
Did you find the drive sprocket nut? Wouldn't it have been a laugh if that was the cause of the ticking?
@TomsTinkeringandAdventures 5 жыл бұрын
Yeah, a real riot. Stay tuned....
@moustafaelhaddad6707 2 жыл бұрын
I believe you should change the oil and filter again. And you need to start it and let it idle until the fan turns on . Take it for a ride with couple of revs and problem us solved .
@TomsTinkeringandAdventures 2 жыл бұрын
As far as the engine that I removed, no oil change was going to fix that!
@DutchDetailer 4 жыл бұрын
You should do time lapse montage into your video’s seeing you working on it. Maybe with some music? Would make your video’s more fun to watch. Sometimes the talking is a bit too slow and too long. I really like this R6 project!!
@TomsTinkeringandAdventures 4 жыл бұрын
Occazion my son has mentioned the same thing. I’m kind of lazy about editing but I might give it a shot. Thanks for watching!
@DutchDetailer 4 жыл бұрын
Tom's Tinkering and Adventures it’s just something to ‘upgrade’ your video’s you know... your voice and information is pleasant to listen to, so reason enough to keep on growing in vlogging! I will follow this R6 project! Good luck
@TomsTinkeringandAdventures 4 жыл бұрын
Occazion thanks, I like to improve but like I said...lazy! 😂😂
@DutchDetailer 4 жыл бұрын
Tom's Tinkering and Adventures haha, well you’re taking time to read and answer my feedback, right?? So there must me some energy left😂
@TomsTinkeringandAdventures 4 жыл бұрын
Occazion yessir! I will see what I can do. Always something coming through the garage. The R6 got fork seals done the other day, that video is coming up soon.
@syitiger9072 4 жыл бұрын
Hay i live in Anchorage
@TomsTinkeringandAdventures 4 жыл бұрын
syi tiger907 it’s a nice place.
@alejandrogrisales7151 4 жыл бұрын
El maestro jordan rudess tambien es mecanico
@TomsTinkeringandAdventures 4 жыл бұрын
Whoa! I had not heard of him but we could be brothers!
@clonestarr3466 4 жыл бұрын
That rad has been replaced before should have two fans.
@TomsTinkeringandAdventures 4 жыл бұрын
Eighteen 6 interesting, I just looked it up and of course you’re right! I will have to order one, my son has the bike in Utah.
@clonestarr3466 4 жыл бұрын
Tom's Tinkering and Adventures it was replaced with a 03-04 one the 05 is the best one of that SL model .
@TomsTinkeringandAdventures 4 жыл бұрын
Eighteen 6 the 03-04 only have one fan? I’m looking online for a used dual fan setup, but the bike has never ran hot. Kind of crazy what you find out working on things, thanks for the info.
@MookMajor Жыл бұрын
What size hex wrench is that
@TomsTinkeringandAdventures Жыл бұрын
For what?
@MookMajor Жыл бұрын
@@TomsTinkeringandAdventures the bolt @9:31
@TomsTinkeringandAdventures Жыл бұрын
@@MookMajor It's been a long time since I did that job, but I'm guessing it's a 10mm just by looking at the video and the tool set I'm using.
@culebraantigua 3 жыл бұрын
Can you put 2012 engine on it ?
@TomsTinkeringandAdventures 3 жыл бұрын
Not in these models.
@resturifwan4590 3 жыл бұрын
Helo.. that carburator or injection bro?
@TomsTinkeringandAdventures 3 жыл бұрын
Fuel injection.
@resturifwan4590 3 жыл бұрын
@@TomsTinkeringandAdventures but why that. thortlebody like carb ?
@TomsTinkeringandAdventures 3 жыл бұрын
@@resturifwan4590 that’s how they look, majority of motorcycles use the same type.
@MrBajabug65 5 жыл бұрын
Nooooo not heart surgery! :(
@TomsTinkeringandAdventures 5 жыл бұрын
Aaron’s Adventures and Tinkering it’s gotta be done.
@MrBajabug65 5 жыл бұрын
@@TomsTinkeringandAdventures Oh and a wiener dog easter egg!
@TomsTinkeringandAdventures 5 жыл бұрын
Aaron’s Adventures and Tinkering I had forgot about that! 😀
@thewitchertales 2 жыл бұрын
dude realy swapped an engine because of a tensioner
@TomsTinkeringandAdventures 2 жыл бұрын
Obviously you missed a video or two!
@thewitchertales 2 жыл бұрын
@@TomsTinkeringandAdventures what was it sorry this was the next one in the auto play. Seemed like that timing chain wasnt tensioned correctly in the first engine. Like you said that gap didnt seem right.
@TomsTinkeringandAdventures 2 жыл бұрын
@@thewitchertales I took apart the engine next, it definitely wasn’t the timing chain. 😀
@thewitchertales 2 жыл бұрын
@@TomsTinkeringandAdventures ill look for that video, interested in what it was. 🤟
Oscar's Funny World
Рет қаралды 10 МЛН
Auto Moto how to?
Рет қаралды 10 М.
Partzilla
Рет қаралды 206 М.
Алексей Ковалёв
Рет қаралды 1,9 МЛН
Aissaule Bakytbek-Kaidarova
Рет қаралды 697 М.
Entertainment channel
Рет қаралды 4,4 МЛН
Santi
Рет қаралды 2,3 МЛН