No video
Yamaha SR250 Classic Jadus Seat Install - Frame Bracket Relocation
Рет қаралды 10,751
7 жыл бұрынIn this clip, I install the Jadus Euclid Seat onto the Yamaha SR250 Classic - a '96 model. With these models (the re-release from the 90's into the 2000's) and many other spanish models - including the Yamaha SR250 Standards, the seat bracket sits quite far back on the frame rails and therefore needs to be relocated further forward to fit the seat. In the video I show the process of cutting and re-using the stock bracket by relocating it and welding it in place. Sorry if I repeat myself a bit! But I think you get all the right information - including reasons to do it this way and various tips and advice :)
Any questions, just shoot!
Seat found here: www.jadusmotor...
@SMU_3L 7 жыл бұрын
Even the seat makes a huge difference on looks :D
@JadusMotorcycleParts 7 жыл бұрын
Thanks man. Yeah I reckon it made a pretty big impact. Add some mini indicators, smaller tail light, Jadus tank kit, rear fender, frame loop kit, plus the up and coming triangle tidy kit, this bike is going to look siiiiick! :)
@SMU_3L 7 жыл бұрын
Im looking forward to seeing it being transformed. My SR125 build is almost finished :D
@JadusMotorcycleParts 7 жыл бұрын
Awesome! You'll have to share some pics once you're done :)
@SMU_3L 7 жыл бұрын
Will do :) Want to do another build. I like the SR series, but cant find a decent one for cheap-ish in the UK
@WindOnMyWings 3 жыл бұрын
Great bike and video! A question: I could purchase a SR 250, I like it a lot.. the only doubt is if it's too small for me, I'm 1,8 m tall. What do you think? Thanks
@JadusMotorcycleParts 3 жыл бұрын
Yepp, the SR250 is a great bike! I (the person in the video) am 1.86m tall and I think it fits just fine, so I don't think you'll have a problem :)
@surferdudegarage 7 жыл бұрын
Oh man, I have to relocate and weld the stock bracket too on my Special from 1992! What type of welder did you use?
@JadusMotorcycleParts 7 жыл бұрын
Surfer Dude Garage oh sucks man! Or you can use one of the seat brackets! I'll send you one if you like? I used a gas welder actually!
@surferdudegarage 7 жыл бұрын
Is that easier? and doing it that way, still need to cut the stock bracket?
@JadusMotorcycleParts 7 жыл бұрын
I think it is easier to bolt everything on, but you still need to remove the bracket!
@surferdudegarage 7 жыл бұрын
Okay, thanks a lot! but no problem bro, I found a friend who will help me to do it right! :D
@argy2428 6 жыл бұрын
Θ Υ
Олимпийскому чемпиону Елдосу Сметову и его тренеру вручили ключи от квартир и машин в Таразе #Сметов
KAZINFORM
Рет қаралды 821 М.
What the Meowk!
Рет қаралды 9 МЛН