Yamaha Ténéré 700: Outback Motortek Slim Rack & Rotopax mount mod

No video

Yamaha Ténéré 700: Outback Motortek Slim Rack & Rotopax mount mod

Рет қаралды 3,384

Күн бұрын

❗️100% of my KZfaq Ad income for Ukraine - • 100% of my KZfaq Ad ... ❗️
I had quite a few questions how I achieved to have such a slim Outback Motortek rack and how I mount the Rotopax no it without the X frame or the Rotopax bracket.
I achieved that by combining the High Exhaust modification with a complete customisation of the rack. Which allowed me to slim the rack to an incredible 45cm in width and create Rotopax sliding mounting system.
I have to say that it's a shame the T7 does not have the high exhaust, because I think this is how the exhaust & rack should be in the first place.
Outback Motortek rack:
outbackmotortek.net/product/y...
Chapters:
00:00 Intro
00:28 Outback Motortek rack options
01:49 Rack customisation
03:25 Rotopax mount
05:01 Summary
---
farandfurther.org
/ farandfurther
/ farandfurther

Пікірлер: 18

@karlkrebs4386 2 жыл бұрын

Thanks a lot for the video! All I need now is a workshop ;)

@FARANDFURTHER 2 жыл бұрын

Hehe, yep it is major surgery, but honestly it now works very well.

@alrightdave6135 2 жыл бұрын

Good work mate.

@FARANDFURTHER 2 жыл бұрын

Thanks

@notadoctora7956 Жыл бұрын

Super

@johnpark6138 Жыл бұрын

Just found your channel - I was thinking the exact same thing on the rack. I have a v2, and its way too wide. Gonna chop it down, your ideas validate my thinking and give me guidance on what to do. Thanks!!!

@franeb7553 2 жыл бұрын

Hey, great video! I think I'll do same thing, so I am wondering did you start with asymmetrical pannier rack from OM and just modified exhaust side (+hook for rotopax on other side)? Thanks in advance!

@FARANDFURTHER 2 жыл бұрын

Glad you like it! I started with symmetrical because at the time I got it there was no asymmetrical. I adjusted both sides to be as slim as possible while keeping enough space for Rotopax.

@MarvelMarvelcomic 2 жыл бұрын

I need this smaller Rags too. :( i use the Hp corse short titanium high exhaust and seraching for a rag like this. Planning for the custom job. Can you tell me the extact length where to cut this one?

@FARANDFURTHER 2 жыл бұрын

Hey, the length really depends what you want. I had scorpion exhaust on one side and wanted Rotopax on the other. That gave me some width. I have not measured the exact distances. We kind of looked at it placed it where we wanted the rack and cut it 😂

@RIDEandPEWPEW 2 жыл бұрын

Já nerozumět řeč tvého kmene.....😋😋😋

@FARANDFURTHER 2 жыл бұрын

Titulky být strašnej wopruz 😂

@jamesriley4857 2 жыл бұрын

How many lts is the rotopax

@FARANDFURTHER 2 жыл бұрын

It’s one US gallon which is 3.7 but you will fit there like 4.5 liters

@rudyvannistelrooij6150 2 жыл бұрын

Or just the bigger gastank by accerbis

@FARANDFURTHER 2 жыл бұрын

Yea, but that does not solve the problem with the width. With original rack I’d have 100+cm width and that’s way too much when your handlers are 90cm.

@rudyvannistelrooij6150 2 жыл бұрын

@@FARANDFURTHER , i usse a horseshoe shape bag made by 5 brothers from Poland, giantloop makes those to and it solves all my rack or paniers problems

@FARANDFURTHER 2 жыл бұрын

Perfect it works for you 👏👍👌