Great channel, I take a lot of important information for myself. I own a Yamaha Virago 1100, 95 year of manufacture. live in Russia. Thank you for the video, continue your work.
@MidlandCruiser3 жыл бұрын
Thank you very much. Really appreciate your feedback. 😉🔧🔧👍
@karlh43133 жыл бұрын
He's definitely very informative!!! Great videos!!!
@karlh43133 жыл бұрын
I need this thanks!!
@1071jmkz3 жыл бұрын
Absolutely spot on, and exactly what I needed. Thorough and brilliantly demonstrated explanations as always. Excellent.
@MidlandCruiser3 жыл бұрын
Thank you very much.... Really appreciate your kind words. I'm glad it helped you 👍
@Salgotarjan013 жыл бұрын
Awesome video, they are getting more and more interesting. You have a well equipped Batcave there. Cool.
@MidlandCruiser3 жыл бұрын
😂😂I know, I wish it was bigger, I just able to walk in now, I have to stop buying more tools.. 🚫😁
@daveydean86402 жыл бұрын
Great well explained video this guy knows his stuff
@pipedreamscustoms51053 жыл бұрын
Awesome video my man!👌 Looking forward to part 2!
@Gofffsky Жыл бұрын
Спасибо за вашу работу, как раз собрался снимать и отдать на порошковую покраску. Информация как это сделать есть только у тебя. Единственное, я думаю что внутреннюю обойму подшипника я не буду вытаскивать, их в России сейчас сложно купить.
@titou33513 жыл бұрын
Beau travail ! Une vidéo bien détaillée , j'attaque demain. Merci 😉
@MidlandCruiser3 жыл бұрын
De rien, je suis content que vous l'ayez trouvé utile ... bonne chance. Ps: Google Translate 😉
@firebird144202 жыл бұрын
Great video!!
@juanfranciscogarzon21903 жыл бұрын
Buenas tardes desde Madrid, aprendo con tus tutoriales. Me faltan las herramientas.
@MidlandCruiser3 жыл бұрын
Thank you, I'm here to help. Don't worry about the tools, just buy them slowly, like I did over a few years. Eventually You will have all you need.
@apophusra593 жыл бұрын
Excellent Video as Always Mate :)
@MidlandCruiser3 жыл бұрын
Thank you. Really appreciate it 😉
@oreg39893 жыл бұрын
fantastic job !!! Gratula !! :)
@MidlandCruiser3 жыл бұрын
Köszi öreg. Próbáltam érthetőre es könnyen követhetőre csinalni. 😉🔧🔧
@user-pq6zh5vz7v3 жыл бұрын
Nice one! I want to get my bike up on a table!!🤙
@MidlandCruiser3 жыл бұрын
Ohh mate I can't recommend it enough to get a bike lift... Changed my life completely, I'm thinking to make a review about it, but first I need to finish the bike which is on it. 😉
@yngvardharjo37042 жыл бұрын
wery good video man
@keithtee54453 жыл бұрын
Great video, thank you !! I have no issues in removing it, but I am concerned about aligning / centering it when putting it back on... Question: Is there much of a process re-installing the swingarm as for 'centering' it...? Are there shoulders that automatically center it or does it require measuring...?
@MidlandCruiser3 жыл бұрын
Hello thank you. Me and an other member of the Virago owners Facebook group answered your questions, check it out.. 👍😉
@keithtee54453 жыл бұрын
@@MidlandCruiser Yup, I saw them; great stuff - thank you very much !!
@karlh43133 жыл бұрын
Sweet!!!
@alexmel64777 ай бұрын
Genio
@Augcliffe Жыл бұрын
Excellent video. Where did you get the bracket for the saddle bags?
@MidlandCruiser Жыл бұрын
Thank you..they came with the bike, so I don't know, sorry.
@anatolytaranenko49293 жыл бұрын
Hi. Thank you for your video! Keep up the good work!! Could you show us your saddlebag support bars?
@MidlandCruiser3 жыл бұрын
Your welcome.. Glad you like it. Unfortunately it is not my bike and have no idea what make the bag support bars are. In a long term plan I would like to make my own bars out of stainless steel, but that's far away. I can send you a few pictures in email if you want to , but I don't think I'll make a video about it, sorry.
@anatolytaranenko49293 жыл бұрын
@@MidlandCruiser Ok. My email: mybardak@mail.ru Thank you.
@MidlandCruiser3 жыл бұрын
Sent you a few email witht the pictures. Check your spam folder may end up there... 👍
@borilapostolov44193 жыл бұрын
Hi there. The video is perfect! I am running a750 from1992 prod.year. Can I do the swingarm removal without dismantling the exhaust off the bike?
@MidlandCruiser3 жыл бұрын
Hi, thank you, really appreciate it. Both 1100 I have worked on needed new exhasut so I can't say for sure, but I think you should be able to do it with the exhasut still attached..
@borilapostolov44193 жыл бұрын
@@MidlandCruiser Thanks for the quick reply mate! Will try and post the result.
@MidlandCruiser3 жыл бұрын
@@borilapostolov4419 your welcome... Honestly I think you'll be fine 👍
@borilapostolov44193 жыл бұрын
@@MidlandCruiser Can I ask something else here about speedometer issue, or send You an e-mail?
@MidlandCruiser3 жыл бұрын
@@borilapostolov4419 sure send it to midlandcruiser@gmail.com 👍
@sergeimironov973 жыл бұрын
Жаль что в России нету такого человека который про вирагу волосы пилит(
@no4emy4ka3 жыл бұрын
Походу надо начинать английский учить))
@dl2.504B3 жыл бұрын
Is it possible to install the wheel with the male and female splines not lined up. I just took my virago 1100 to a mechanic to get the rear tire changed, and after he install the wheel, now there's noise coming from the driveshaft and wheel where it meets the drive shaft. Sounds like a tapping , as if something is hitting the walls of the driveshaft or if there's binding. It happens when the bike is in gear while on the center stand and wheel moving without any acceleration. It does it in all the gears, and it's louder in 5th gear. Any ideas? Thanks
@MidlandCruiser3 жыл бұрын
Hi, short answer is no. However there is a spacer inside the wheel and if he left that out it may cause some problems. Regarding the tapping noise while on center stand, if it's not continuous and fairly mild than that is considered normal. What you hear is the play between the gears from the final drive all the way back to the gearbox (especially if you just leave the bike on idle) v-twins doesn't idle super smoothly. If it is very noisy and continuous then your universal joint maybe on it's way out. You can chek how big is the play by putting it in gear, on the center stand with the engine off, just move the wheel and you'll see how much it moves back and forth before it engages the gearbox. It is very hard to tell you what could it be without actually listening to it. I recommend to join the "Virago owner's club " on Facebook and post a short video there, we will be able to help better that way.. facebook.com/groups/7272457493/?ref=share
@dl2.504B3 жыл бұрын
@@MidlandCruiser thank you very much, that definitely helps me out a lot. I'll remove the wheel and take a look at it.
@deanrobinson96603 жыл бұрын
Full throttle
@MidlandCruiser3 жыл бұрын
🤔
@francoisalain1563 Жыл бұрын
Hello Thabk you. Could you please to translate in french ? And du you have vidéo carburateur ?
@MidlandCruiser Жыл бұрын
Hello. I will have a look if automatic French available or not, but me personally can't translate it as I don't speak French. I have many carburettor videos on my channel, have a look around I'm sure you'll find them.
@aloohaloo87413 жыл бұрын
What kind of bearing and seal did you use pls?
@MidlandCruiser3 жыл бұрын
Here is the bearing I used Koyo 30203JR ebay.to/3f582E6 And here is the seal I used SKF CR25x40x5HMSA10RG ebay.to/3nnDZdF