Yamaha Virago 500 XV - Carburetor Rebuild - Carb Clean

Yamaha Virago 500 XV - Carburetor Rebuild - Carb Clean - AMAZING DETAIL

Рет қаралды 7,757

3 жыл бұрын

Complete Carburetor Rebuild / Clean on the 83 Yamaha Virago 500
Link to Rebuild Kit: amzn.to/3j6RJb0
Best Carb Cleaner on the market: amzn.to/2FSHitl
Engine Oil: amzn.to/3gGkMUb
Oil Filter: amzn.to/2PtJJr2
Battery: amzn.to/3tRZwyQ
Virago Flywheel Puller: www.ebay.com/itm/233983673263
Also more common issues with the Yamaha Motorcycles watch:
• Yamaha Virago 500 V-Tw...
• Yamaha Virago 500 V-Tw...
• Yamaha Virago 700 Engi...
• Yamaha Virago 700 Clut...
Mid Nebraska Motorsports YT
PO Box 23
Central City, NE 68826
VENMO is: @midnemotorsports
Check out my eBay store at stores.ebay.com/midnebraskamotorsports
Shop for parts at: midnebraskamotorsports.com
Instagram / midnebraskamotorsports
Patreon / midnebraskamotorsports
Facebook: / midnebraskamotorsports

Пікірлер: 26

@tjdjultima 2 жыл бұрын

Lifesaver, I thought I was up the river after just buying this thing and come to find a puddle of gas under the carbs in my garage the next day. Thanks again!

@MidNebraskaMotorsports 2 жыл бұрын

Absolutely!! Happy to help. Let me know if you have any questions!! Have you hit the subscribe button?

@williambernardo3531 Жыл бұрын

@@MidNebraskaMotorsports jjj Kopp OPPO] ppp L

@WilliamAshleyOnline 2 жыл бұрын

this playlist is king. very helpful.

@MidNebraskaMotorsports Жыл бұрын

Thanks for the comment William. Fun bike to shoot videos on. Have you watched them all?

@tysonfoerster9218 3 жыл бұрын

Thanks for making this!! Very useful

@DavidRodriguez-ki4zn 3 жыл бұрын

Where does the fuel enter the fuel pump from the petcock?

@lerp85 2 жыл бұрын

I’m wondering this as well. As where he shows that fuel line going mine isn’t set up that way at all.

@redxvortex9816 2 жыл бұрын

Thanks a lot for making this video. I have (I think) successfully cleaned my carbs. Both my spark plugs are black (not oily) and I'm pretty sure the previous owner tinkered with the carb settings. I wish to set the A/F screw to the default setting, but I cannot seem to find it in my owner's manual. On the virago 535 I believe I had to turn the screws in until I felt resistance and then out approximately 1.5 to 2 turns. Is it the same on this carb? Afterwards I will be syncing the carbs. Fun project!

@georgedicicco6901 9 ай бұрын

Can anyone help me with where what lines connect to what on install of carb and where can I either get new fuel pump gaskets and rubber plugs or a new pump itself

@wijnschef2734 3 ай бұрын

Can you maby explain please why does de motor spins around and makes the normal starting noise, but will not start. Everything is almost new including a rebuild kit for the carb and bobine? Thanks

@MidNebraskaMotorsports Ай бұрын

My guess is that you have a broken idler gear. Let me know what you find. If you need more helpful tips, check out: kzfaq.info/get/bejne/jpZxl6mp0LDNf5s.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.

@ryaneichhorn7110 Жыл бұрын

How do you tune these carbs? The air and fuel screw location? Or are they differnt from car carbs? I may sound dumb but this is my first bike so I'm clueless 100 precent on bike stuff

@ckc2002 6 ай бұрын

Just watched the video. Very nice. I bought the same bike non running. Unfortunately for me, someone has been into the carbs many times. My shop manual gave me the main jet numbers and jet needle numbers but the number I'm looking for is for the jet under the diaphragm. Wonder if you have that info?

@stanleyclark8677 Жыл бұрын

At the start of your video I think the second part is different than what I have on fuel lines .The part where hoses go to two carbs and to bottom part of fuel pump, instead the bottom part of hose goes to fuel tank and also the bottom part of fuel pump connects to hose on fuel tank. Please tell me if im wrong .Thanks

@MrUND3RSC0R3 11 ай бұрын

Hey I just noticed that comment on a second watch, Ive just hooked my carbs back up and they're high idle/awaiting sync. So the bike runs. But yeah my fuel lines differ from the video and run, petcock straight across to the pump, which connects to the carb with the solid T piece like the video. Then the T piece with clamps connects back to the petcock, though oddly with a long clear hose wrapped around the fuel pump to avoid kinks. Ive ran it 6k like that

@XxJOHN2oh6xX Жыл бұрын

What is the part the jets screw into called? I’m looking for one as mine is beyond repair.

@johnconstance6273 Ай бұрын

I just recently got an 83 virago xv500 and was wondering if you could help with a few things mainly finding a petcock for under $350 or can I rebuild the one i have please

@firebird14420 Жыл бұрын

I have the 95 Yamaha Virago SG. Why would my pilot screws have to be a 1/2-1 turns out? Both are the same and it just revs higher as I turn screw in, it doesn't bog down till I turn it out around 1/2-2+ could the choke not be aligned properly idk please help me when you can. Thanks!

@nikolaniketic1367 3 жыл бұрын

Hi video is great how much is float adjustment in mm ? bike is xv500 L 1992 tnx

@fingerlakesdiet560 Жыл бұрын

Great video! I am rebuilding the same carburetor my float needles are the same as yours (no wire clip at the bottom of the float needle). But all the rebuild kits have the wire on the end of the float needle and the female part is also different even at your link for a rebuild kit?

@callmeBoost_ 3 жыл бұрын

Just bught an '83 virago, can you put the carb settings in the comments, i need to rebuild it

@BeaulieuCarl 2 жыл бұрын

where is the fuel pump video ?

@davidferguson461 3 ай бұрын

JIS not Philips.

@MidNebraskaMotorsports Ай бұрын

Nailed it. Thanks Dave and Thanks for the comment! Let us know if there is anything we can help with. Check out: kzfaq.info/get/bejne/jpZxl6mp0LDNf5s.html for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.