Bobby Cody THANK YOU!!!! For putting up this video. 2 hours of trying to do research on the internet. And 2 more hours watching over a dozen videos before I came across your video. Went outside last night after 10pm and found those two wires. Got my audew 2-pin electric turn signal flasher relay installed. I rode the bike to work this morning feeling so much better and safer knowing my turn signals are flashing properly now. And just the simple fact that others can see my turn signals on and not some ridiculous rapid flashing turn signal. Thank you again for taking the time to put this video up!!!

BIG TOM GOT AN ADJUSTABLE RELAY AND DID WHAT YOU SAID AND IT WORKED GREAT. NOW I NEED TO FIX MY HEADLIGHT. LOL. THANKS MAN.

FINALLY! The video ive been searching for days for. This helped a ton, ordering my relay right now and going to wire it in this weekend. I have a 07's v star 1100 custom midnight that i just completely tore down and customized. Put integrated led taillight/turn signals/brake light in the back and new led signal lights in the front and when i hit my turn signal button all 4 of the started flashing. Checked my wiring multiple times to make sure it was correct and everything i searched online came back to the relay issue. I was looking for a solution that didnt require me to install resistors all over the place but the problem was i couldnt find anyone that had any videos out there with another v star like or similar to mine. And they dont make a plug and play led flasher relay upgrade that i know of. At least your kit came with the relay i just ordered the most popular one that showed up on Amazon. Thanks again for the video!

Thanks man. Ive been scratching my head about this for days!

Hell ya! I ordered switchbacks for the fronts and a new LED relay for my 09 vstar classic. I opened the cover and saw the 5 pin relay and felt defeated. But thanks for your video and about 10 minutes of my time I have sweet normal flashing LEDs

Thank You Bobby. This is the best xvs 1100 fix also other Yamaha model fix. Cheers mate from Australia

Worked perfectly. Glad I didn't have to open the relay. Thanks for the advice.

It worked for me, thanks a bunch, you are a life saver!

Thanks a lot man. Really helpful, saved me a ton of time

Much appreciate the helpful video. I wonder if an EL-12 would serve the same purpose. Same 2 pin setup like that relay

wiring looks similar on my 2005 650 V-star - thanks, this technique should work for me.

Needed this thank you

Your video was extremely helpful man, any chance you have or can upload a video on how to install left hand turn signal/ head light switch?

Your a hero brother thank you

Thx. Helped alot

Hi I just got a vstar1100 recently all of my lights work instead of the front headlight my fuses are good and my bulb is good and brand new is this the relay that is connected to the headlight or is it the one beside it ?

Thanks for the video!

Hi, very good video. On another matter, does your bike have an emergency flasher feature where all 4 indicators can be switched to flash? If so, where is the switch? And does this work with the ignition Off?I’m in the UK and just bought my bike, it’s the same model as yours. Cheers 🇬🇧

Thank you👍😃👍

Awesome. I’ve been looking for a while on how to do this and finally find a video that explains it well. Thank you! And , what handle bars do you have and how tall is it?

Does this affect the auto cancel or dash light?

Thanks dude this helped me too! Did you leave the stock relay attached too or unplug it?

Hi Bobby can you tell use what relay you used and where to get it . your vido was good and very ez to under stand thanks.

Thank you sir

Did you do the front led lights yet? I replaced my front and back with led’s but they are flash hyper all at the same time. I got a relay but I think it’s bad so I’m going to have to get another one tomorrow . I think the wire colors are the same on my 650 so now I know which two wires I need. Thank you

Thanks for the video... when you put it back together, did your indicator light in your speedo cluster still work? Also was that an LED relay that you used?

so I did everything the same in the video and it worked great but when i plugged in the gas tank all 4 turnsignals blink is there another wire i need to remove from the tank plugin

Please get a me I have some questions about those bars

Hey man I got a 2004 v Star 1100 and have been looking for the tombstone type Integrated taillight. Do you happen to have a link to the one you got?

Where can I find out this relay? Please!

Only things missing here is the procedure of disconnecting your battery first as any electrical work should be preformed with the battery disconnect and alot of people would have no idea how to remove the female connectors from factory plug other than that was good

can you add a link to the light assembly you got?

Hope you can help me out, previous owner put leds on my bike and they work but the indicator on the gas tank does not

I have a 2014 Vstar 1300 deluxe. Would this work the same way for me?

Where did you get your relay from I've been looking for a while now.

Bobby, what handlebars/tripple tree are these?

Wondering if this is the same relay for a 06 Yamaha royal star…

I have power going to everything but the plug for the bulb

Did you retain self cancel feature?

Any idea on a fix if all four of of turn signal lights flash?

How tf did you get the wires out of the harness

It occurs to me that the spade clips from the oem relay would connect directly to the new aftermarket relay if you simply pull the supplied wires off and connected the original wires. This would eliminate the extra connections. Just sayin...

also all 4 turn signals are aftermarket led anyone with an answer please

Why do you pull the wires out and not take off the whole oem piece?

well I tried it now all four flash and I re connected the original wires and all four still flash now all I have is hazrds

didn't work