Yamaha Wolverine X2 850 R-Spec Service - How To Change All Fluids @ D-Ray's Shop!

Рет қаралды 29,011

2 жыл бұрын

In today's video, Randy and I will show you how to service all fluids and filters on a Yamaha Wolverine 850. We'll show you what size fasteners all the drain and fill plugs are, along with a few tips and pointers along the way. We intended for this to be a video series, but we were able to edit it down for one 17 minute video. Be sure to watch all the way to the end for our out takes!
Please don't forget to like our video, subscribe, and click the notification bell! Thanks for watchin', y'all have a goodun'!

Пікірлер: 56

@brycemoir1359 2 ай бұрын

I have seen so many of these videos on doing mechanical work as a qualified diesel mechanic myself this video is the best I have ever seen so precise and clear!!! Well done guys awesome work!!!

@Riverhorse916 7 ай бұрын

Well done. Thank you for making the service so clear with excellent/professional-like photography👍

@twallin47 Ай бұрын

I really appreciated your video! Did the first service on my wolverine x2 today. I referenced you guys every step of the way. Thank you

@kifferpete7987 4 ай бұрын

Thank you for your video. I just purchased the 2024 Wolverine X2 1000. I have no mechanical experience. I’m a visual learner and this really helped. Thanks

@darrenbrooke8988 4 ай бұрын

Just bought this model and this video was extremely helpful. Will save me a lot in labor costs in the future. Thank you.

@wendelinbittner9054 Жыл бұрын

Those are absolutely legendary Mullets ! love it guy ! Rock on! .

@spacecatboy2962 2 жыл бұрын

we need to see more videos D ray

@DRaysShop 2 жыл бұрын

Workin' on it!

@spacecatboy2962 2 жыл бұрын

@@DRaysShop Be great to see how to fix a cold natured 85 big red.

@rockbay79 2 жыл бұрын

You two are having way too much fun!!!! I love these maintenance and repair videos that you both provide. I always learn from them. Again, thanks for all you do and have a Very Happy New Year!!!!

@DRaysShop 2 жыл бұрын

Thanks! We love what we do for a living!

@brianfisher3991 2 жыл бұрын

Thanks fellas , exactly what I was looking for .

@sethh8892 11 ай бұрын

You don't need to remove that access panel to get to the oil filter, just take a band clamp style oil filter wrench, and stick it back there. I was able to do it while the vehicle is on the ground. Saves you a ton of time, there's plenty of room back here for your hand to reach in and grab that oil filter.

@kevinmcdonald1917 2 жыл бұрын

Best video ever, thanks guys.

@jeffwaldorf2334 2 жыл бұрын

Great video, very well done and Have a Happy New Year.

@DRaysShop 2 жыл бұрын

Thanks, happy new year to you and yours!

@FJ80Coop 2 жыл бұрын

Hey Donnie,hope you n Wanda n the new guy all had a great Christmas and have a great New Year !!

@DRaysShop 2 жыл бұрын

Thanks man, same to you and yours!

@jeffnajmowicz5634 2 жыл бұрын

D-Ray is a legend! Both in the shop and at the barber shop 😉

@DRaysShop 2 жыл бұрын

In my own mind anyway... lol!

@appraiserdmitchell 2 жыл бұрын

Good clear Instructions. Thanks

@ricpowell8784 10 ай бұрын

Very helpful information 👌

@FJ80Coop 2 жыл бұрын

I always instruct people to only use a 1/4" drive short ratchet and socket and only run down by hand and then barely bump the ratchet to snug it and leave it be... I've seen dozens of ruined cases and diff housings from the Rambo torque guys efforts... Keep up the good work and maybe more videos this year ?

@denisenovak7605 Жыл бұрын

How do I turn the sound on

@davidgroff3355 Жыл бұрын

The best wolverine oil change video out there 👌 u put what weight engine oil in? Thanks guys

@Jb-uy5zx Жыл бұрын

Great video thank you!

@ryancomeau8616 Жыл бұрын

that's awesome boys thanks

@mckennaclevenger7873 11 ай бұрын

Thanks great job

@devinleonarduzzi 2 жыл бұрын

Awesome! More wolverine videos please!

@joebobs8363 Ай бұрын

Great vid guys, thank you! So as far as the engine oil specifically, it ended up being about 3 qts total then? Thanks!

@davidbrugger5145 2 жыл бұрын

What are there two drain plugs for the oil?

@DIYDad1 2 ай бұрын

I ended up filling the engine oil through the filler hole on the top of the engine near the spark plugs. I didn't even know about that oil reservoir off to the side. I'm hoping it circulates everything just fine where it needs to be lol. Wonder if I should drain and refill.

@skoal022 Жыл бұрын

Hey brother do you have a video on the adjustment for the auto decompression lever say for an xr200?

@jsedits01 2 жыл бұрын

Yo guys what’s the best brand coolent to use for my 2021 Yamaha Wolverine x2

@huntingandfishingwithlogan2367 Жыл бұрын

Hey do u have to change transmission plug after 15-20 hours as well

@adierob1 2 жыл бұрын

Two of the best mechanics in town, love watching your videos. Are the hairdresser's on strike in judsonia 😆😆 keep the videos coming d-ray 👍

@thatkidintheranger9014 2 жыл бұрын

Dray you still responding to comments, one question is the clutch adjustment video u Filmed like 10 yrs ago on the 200 atc the same for the 185s an would u happed to know what the carrier mounting bolts specs on a 185s are?

@Travide 10 ай бұрын

So the front rear and transmission is 80W-90 gear oil??

@kifferpete7987 5 ай бұрын

Did you have any trouble getting your dog comfortable with sitting in the Wolverine ?

@richg5420 11 ай бұрын

Why is my coolant tank always empty and it sits in the radiator about 1.5” down, it holds a pressure test ?

@FJ80Coop 2 жыл бұрын

Someone needs to manufacture a coolant tank shield for that machine as it's in a very vulnerable location..

@MrEdukator1 2 жыл бұрын

Howdy fellas!

@DRaysShop 2 жыл бұрын

Hey! Hope you have a goodun'!

@golfernky1687 2 жыл бұрын

I gave y'alls address to locks of love

@DRaysShop 2 жыл бұрын

We ain't plannin' on cuttin' our hair just yet Jeff, so put your scissors away, lol!

@jlsjls7415 5 ай бұрын

can i use Lucas Oil LUC10048 10048 SAE 75W-90 Synthetic Transmission and Differential

@xaiver69u Жыл бұрын

What about for the x4?

@ridgerestaurantchurch7110 2 жыл бұрын

That’s a big boy and I am talking about the car

@roper959 4 ай бұрын

but you don't show how to get to the two upper bolts that are inside the cab.

@BlueDawnEnduro 20 күн бұрын

Why not just use torque specs tightening is too subjective. Crush washers should not be reused.

@msilliphant 2 жыл бұрын

what about 0 rings crush washers

@DRaysShop 2 жыл бұрын

I've seen crush washers with o-rings molded into them in automotive applications, same principle applies to tightening them down also.

@Travide 4 ай бұрын

Skipped the most important part removing that stupid panel