In this clip we remove the baffles from the stock XV535 exhaust system - for a little more flow and a better sound. Any questions? We'd be more than happy to answer! Cheers, Jadus
Пікірлер: 54
@GabrielFernandes-bc7se Жыл бұрын
Just came here to thank you! I was able to do everything in just 3 hours with: portable grinder to remove the welding on the caps, a driller for the weld on the baffles and WD-40 + screwdriver + hammer + pliers to remove the baffles. It was an easy and smooth process!
@jamesr.waltonjr.4573 жыл бұрын
Very nice video. Quality debaffle work.
@KalleMuona115Ай бұрын
I had to warm the baffles with a blowtorch before getting them loose. Great video.
@rameshsahiram35563 жыл бұрын
Perfect ! Very nice work guys ! Thx !
@nanalcd5628 Жыл бұрын
Nice video, nice job, nice sound. Thank you from USA.
@HenryKhiev3 жыл бұрын
Great video! Need to do this to mine.
@crabbyboy36103 жыл бұрын
Thank you, it is not many good debaffle videoes for the Virago 535. Very good video, I hope for more:)
@JadusMotorcycleParts3 жыл бұрын
Thanks man, I appreciate that! What video would you like to see next?
@crabbyboy36103 жыл бұрын
@@JadusMotorcycleParts A video about mounting forward controls would be perfect
@duskshadowpaws44343 жыл бұрын
bloody hell I thought that with old bikes like this the exhaust system went straight through to the baffel, i didn't realise there was this massive exhaust box lol
@JadusMotorcycleParts3 жыл бұрын
yeah crazy right! I think this was the precursor to what we see on most modern bikes now - headers into a collector box, then out to a silencer.
@emilhansson5488 Жыл бұрын
Great video with detailed instructions :) I would just put rivet nuts into the baffles themselves and then put them back on with screws before the inspection :)
@JadusMotorcycleParts Жыл бұрын
Great idea!
@fng2263 жыл бұрын
Great video! Did you need to change the main jets? What was the right size jets in such case?
@JadusMotorcycleParts3 жыл бұрын
Thanks! Yepp, main jets and air/fuel screw was adjusted. We have our intake kit installed on this bike so the jetting is different if you still have the stock intake set up.
@heavilyarmedgoy3 жыл бұрын
Would like very much to see an update video on the o2 sensor/jetting and a ride away so we can hear it in action : )
@JadusMotorcycleParts3 жыл бұрын
I'll try find some time to do a bit of a comparison video :)
@heavilyarmedgoy3 жыл бұрын
THANKS!!!
@KAPANGAAAMASTER3 жыл бұрын
This bike is carbureted no O2 sensor, yes it may need jetting!
@TheXeago3 жыл бұрын
How much louder is it than stock exhaust now? Does it get obnoxious on longer rides? Love the xv535 content btw, going to buy one soon :D
@JadusMotorcycleParts3 жыл бұрын
Thanks! Yes, you should get one, they are great bikes. We think the debaffled sound ends up being just about right. It has a really nice, deep v-twin sound, without hurting your eardrums like the straight pipes do!
@simoneruffini866 ай бұрын
work done today. thanks to your instructions. it was hard to remove them but in the end the sound is spectacular. Is it necessary to regulate the carburetion?
@JadusMotorcycleParts6 ай бұрын
Hi! Great you managed to remove them. You will most likely not need to adjust your main jets but you should definitely adjust your air/fuel screw setting to allow more fuel at low rpms. It should be adjusted to between 3-4 turns out.
@Khemore2 жыл бұрын
How did u adjust the carps for no baffle mode? I really like the sound after u removed the baffles, and i wan't to do the same on mine, but i'm afraid to do it without jetting
@JadusMotorcycleParts2 жыл бұрын
We have an install video for our intake kit and there you can see how to adjust the carbs 👍
@Mr_DocQ2 жыл бұрын
Hey! very informative video that gives hope for tomorrow. such a question, I have an XV400, for my engine I understand correctly that it will play the same way, having a stock intake
@JadusMotorcycleParts2 жыл бұрын
Yes, by looking at the XV400, this kit would work for that bike as well.
@Mr_DocQ2 жыл бұрын
@@JadusMotorcycleParts Okay, can you also tell me what jets you used for idling? or these settings do not affect the removal of the inner part of the muffler? Thank you
2 жыл бұрын
Hey man! I was just wondering, what is the consumption after removing those baffles
@JadusMotorcycleParts2 жыл бұрын
No sure man, we have not done any testing on that as it has never been a problem/consideration for us. Some of our customers would know though so you could try the same question on the Virago facebook groups :)
@belmondoe96433 жыл бұрын
Is it safe or suitable to debuffle this exhaust while having stock intake and air filter system? I saw your video about some nice mod of yours but and here is my question
@JadusMotorcycleParts3 жыл бұрын
Hi! Yepp, it is fine to do this mod with the stock intake system. Just make sure you screw out your air/fuel screw 1/2 to 1 full turn and probably best to go up a couple of sizes on the main jet.
@Mr_DocQ2 жыл бұрын
Hello. Have you started doing exhaust system upgrades like in the video? what parts did you change after that?
@m.esslinger46693 жыл бұрын
Why not cutting the Baffles in a Half or more and then move it back in, so maybe you have to do this once in a time? Would it not sounds louder anyway?
@JadusMotorcycleParts3 жыл бұрын
Good idea! You could absolutely do that! Not sure how good the sound would be but would definitely be better than stock :)
@pekkaahlgren19282 жыл бұрын
Is it possible to use debaffeled exhaust without replacing the jet?
@JadusMotorcycleParts2 жыл бұрын
Yes it is possible but we would not recommend it. Your exhaust system will flow better allowing more flow into the cylinder (more air) and this increased flow should be matched with more fuel, otherwise you will have a lean/leaner condition.
@user-yu2um4fp2w Жыл бұрын
👍👍👍🔥
@user-nw8qj4ec6y Жыл бұрын
Oz Electronic Yamaha Virago 400SH535Slim used
@killnothingbuttires40353 жыл бұрын
I'm that ''foolish'' person that literally cut the bastards out without a way to reverse it huehue
@JadusMotorcycleParts3 жыл бұрын
Hahaha, although I was not referring to you, that is a little foolish ;) Jks. I was actually referring to people I have seen just drill big holes in the ends of the baffles to 'let more sound out' haha
@brucelee38352 жыл бұрын
I grab my 25 cal pistal and shot 8 holes on the baffle plate without removing the exhaust. sound just as loud. Only took 45 sec.
@JadusMotorcycleParts2 жыл бұрын
Haha amazing. Well you must be American because there sure is hell ain't another place on earth someone would do that.
@mitchellkennedy35562 ай бұрын
Can get st8s for $200. Still nice
@fuelheadjay88003 жыл бұрын
Good day chap will your kit work if filter was in open air and not covered by tank has looking at having split tank on my xv535 and think it look sweat on show please check my vid kzfaq.info/get/bejne/ftNdgM912N2woX0.html This is it at mo and will be getting redone and be a survival rat hopfuly when done.
@JadusMotorcycleParts3 жыл бұрын
Hey man! Yes it would definitely work in that scenario. Although it would be best to cover it with something - only in case of rain. All other debris is no problem but moisture into the intake would not be good. Cheers.
@chrwille13 жыл бұрын
You dont need to deill !!!!!!!!
@JadusMotorcycleParts3 жыл бұрын
?
@DmitryStein3 жыл бұрын
this is not stock exhaust
@JadusMotorcycleParts3 жыл бұрын
It isn’t? It has the Yamaha stock exhaust part number stamped on the side of it!
@davidjames10073 жыл бұрын
Yes it is stock, it's exactly the same as mine
@AA-692 жыл бұрын
What he'll be meaning is that he'll have a "different" stock on his... Mines has longer pipes, but when i debafffle it, I'll cut it back to the shorter size and avoid plugging holes etc...
@richardrichard54092 жыл бұрын
Sounds like a wet fart 🤣
@JadusMotorcycleParts2 жыл бұрын
You really think so? Try listening to a 180 degree crank parallel twin!