YARIS ENGINE OIL CHANGE

Рет қаралды 55,511

4 жыл бұрын

Engine Oil Change on TOYOTA YARIS with 1NR-FE engine 1.33 dual VVT-i
To Download the Adjustable Car Ramps PDF plans and dimesions pls visit www.jlsetnuper.epizy.com

Пікірлер: 74

@ntdtv 4 жыл бұрын

Your videos are great!

@jlsetnuper 4 жыл бұрын

thank you

@tardeliesmagic 11 ай бұрын

Brilliant! Excellent safety procedure at the beginning & Magnatec 👌

@jlsetnuper 10 ай бұрын

Thanks 👍

@jptrainor 3 жыл бұрын

Very nice ramps!

@jlsetnuper 3 жыл бұрын

thank you

@dennispatchett9806 3 жыл бұрын

This was an amazing video very professional way to change the oil

@jlsetnuper 3 жыл бұрын

thank you for the comment..

@arthurgiannakis2156 2 жыл бұрын

This was interesting to watch and you are indeed very meticulous. However by the time you've got the car up the front wheel ramps, chocked the wheels, raised the back wheels, put the back wheels on blocks then raised the wheels with the blocks together to insert the shim blocks, lowered the car, removed the front ramps, jacked the front blocks and wheels up together, inserted the front shim blocks and lowered the car ready to start the oil change, I'm literally already well into the actual oil change using one hydraulic jack and one jack stand. Incidentally I did the engine oil change today on my 2007 YRS Yaris.

@jlsetnuper 2 жыл бұрын

Actually, the work that was done at the time of filming are gearbox oil change and the exhaust pipe shield with corroded mounting bolt, I just raise all the wheels for the access and I made a quick oil change but any way thanks for watching...most of the time when I do oil change only the front ramps are used..

@24022476 4 жыл бұрын

Thank so much for your great video, you are super star 🌟👍

@jlsetnuper 4 жыл бұрын

Thanks for comment..

@Sungjuleeyes Жыл бұрын

Hello very nice ramp! Is there any reason why you didn't add a ramp to the back just like the front so that you do not need to jack up the rear with a hydraulic jack? Thank you

@karoma7898 4 жыл бұрын

It'd be great to know what you're actually doing and why, like "changing the oil filter", "soaking the new filter so the engine won't run dry", "replacing the gasket because reusing the old might leak oil" , and so on

@Dieutoutpuissant Жыл бұрын

Those wooden ramp..... sooo wise, i'm stunned

@jlsetnuper Жыл бұрын

Thanks for watching..

@987frankie 2 жыл бұрын

Excellent. Really appreciated.

@jlsetnuper 2 жыл бұрын

Thank you..

@stephenrose783 Жыл бұрын

Great stuff thank you.

@jlsetnuper Жыл бұрын

thanks for viewing..

@ercansahin3057 Жыл бұрын

Well done !

@jlsetnuper Жыл бұрын

thank you..

@stephenstokes8318 4 ай бұрын

Great ramps

@jlsetnuper 4 ай бұрын

Thank you

@dennisdanquah8317 2 жыл бұрын

Great job

@jlsetnuper 2 жыл бұрын

Thank you

@mikmik4205 Жыл бұрын

Excellent video one thing indont understand did u open the oil filter by clockwise or anticlock wise as per my understanding everything open on anticlockwise pls confirm

@jlsetnuper Жыл бұрын

watch again the video..it is anticlockwise

@giuseppecocorullo7184 7 ай бұрын

What size is the socket for the oil filter?

@eltigre91 3 жыл бұрын

No need for ramps at all, everything is at an arms reach-easy

@jptrainor 3 жыл бұрын

Maybe add a lock of some kind for the front chock blocks.

@jlsetnuper 3 жыл бұрын

Yes..there is some changes of the ramp in the future..thanks for watching

@alptekinserdenak2263 3 жыл бұрын

You didn't remove the inner part of the filter holder which should be done first. That's why you also have a smaller gasket with your filter kit.

@jlsetnuper 3 жыл бұрын

the reason is, I did not buy the OEM filter kit, and Im afraid the small o-ring will not set properly and will create leak..thanks for watching..

@InJesusNameAmen143 4 жыл бұрын

Forget the oil change . WHERE CAN I GET THE RAMPS !? Nice Ranps ! I need those. They almost look Homemade (?) And then painted ?

@jlsetnuper 4 жыл бұрын

the ramps are homemade..

@tardeliesmagic 11 ай бұрын

Get a scaffolding plank & cut it down to length,use it like steps/long ramps...can't go wrong. I had a pair i made,i trimmed off the edges so the tyres would go over each tier/level with ease. I put a strip of wood at end of the top level/tier so the car don't go off the top 🤣 Use nails or screws to hold them down/together,it's so simple to make & 100% safe.

@londres2121 3 жыл бұрын

Y la capa de ozono? Sería importante que digas dónde depositas el aceite

@jlsetnuper 3 жыл бұрын

mi casa está a solo 1 km de una estación de reciclaje ... gracias por ver

@LA_Commander 2 жыл бұрын

Can't stand those cartridge style oil filters. Much prefer the regular spin-on kind.

@davidvalens3337 2 жыл бұрын

did you make those ramps your self? also where did you get that oil filter tool from? I have never seen that before

@jlsetnuper 2 жыл бұрын

the ramps are homemade , check this link kzfaq.info/get/bejne/o7aGm9iLl7Solps.html the oil filter tool, bought from aliexpress ..thanks for watching

@jlsetnuper 2 жыл бұрын

for the ramp check the link www.jlsetnuper.epizy.com/?i=1

@hassaanchughtai1953 Жыл бұрын

Which engine oil for this engine ? 0w-20 is recommended but you are using 5w-20, is this ok? First time doing it myself, thanks in advance

@jlsetnuper Жыл бұрын

5W-20 is also in the manual..but 0W-20 is recommended if you car has a low mileage..

@westlife609 3 жыл бұрын

what is size of that car engine? is 1 little or 3 little thank you

@jlsetnuper 3 жыл бұрын

Its a 1.33cc engine...thanks for viewing

@ShakespeareCafe 3 жыл бұрын

NEVER, EVER, take your Yaris to a quick change oil shop. I bought a used Yaris, noticed the sticker in the window for the next oil change from some monkey shop I did my oil change myself today and the filter was tightened on so damn tight I had to use my Irwin expandable wrench to get it off and the oil plug was damn near stripped as some low paid oil jockey must have used an impact wrench on it....

@jlsetnuper 3 жыл бұрын

I had it one time to have an oil change on a shop..but they broke the handle where you open the hood..so I do my oil change since then..thanks for viewing

@TheFarazz 3 жыл бұрын

what size is the oil filter cap wrench?

@jlsetnuper 3 жыл бұрын

www.ebay.ie/itm/Universal-14-Flutes-Oil-Filter-Wrench-Cap-Housing-Tool-Remover-for-TOYOTA/293633529559?hash=item445dec16d7:g:9E8AAOSwtf1e~Hx1

@TheFarazz 3 жыл бұрын

Thanks

@MIKEL7391 Жыл бұрын

good video except that I put the joint to the wrong place and after a few kilometers I lost all my oil ,the joint was ouside ,I am 70 years old and I take medecine it's why.Thanks for the next time ,it will be good for memory.

@jlsetnuper Жыл бұрын

Thanks for watching

@RomeoMoDernoo Жыл бұрын

Is the Toyota Yaris 2011 Terra Sporty engine belted or chained?

@jlsetnuper Жыл бұрын

do you have a VIN number?

@RomeoMoDernoo Жыл бұрын

@@jlsetnuper KR-y52 320

@RomeoMoDernoo Жыл бұрын

@@jlsetnuper Engine number?

@jlsetnuper Жыл бұрын

The vehicle identification number..17 character number..it should be in your car's door name plate..if you have that ..then will know if is belt or chain

@getthecansin 8 ай бұрын

Does this engine burn oil..the piston rings problem?

@jlsetnuper 8 ай бұрын

yes, this engine is known to burn more oil. but in my yaris (13 year old) with this engine, i dont have any problem on burning oil. maybe because I change my oil every 5 thousand miles and I only use Castrol Magnatec 0W-20 oil..thanks for watching

@getthecansin 8 ай бұрын

Thanks, just bought a 2009 1.33 dual vvti Yaris with 108 k klms. No blue smoke and runs really well. No oil inside exhaust . Will def do regular fully synthetic oil changes. Subbed

@sandman7142 9 ай бұрын

Where did you get the ramps?

@jlsetnuper 9 ай бұрын

thanks for wacthing..I build the ramp my self, check here kzfaq.info/get/bejne/o7aGm9iLl7Solps.html

@tommymartinsen8774 Жыл бұрын

Is a little funni var. Ind i know is a good one .

@jlsetnuper Жыл бұрын

Thanks for watching..

@njsongwriter 3 жыл бұрын

I know there's a notch in the oil filter cap that looks like it would be for a pick or screwdriver but Toyota says not to use such tools in the instructions that come with the OEM filter. How & why to replace an o-ring without any tools. See this one minute video... m.kzfaq.info/get/bejne/l5Z0ktl4q82wdGw.html

@North49191 3 жыл бұрын

4 jacks stands are a lot easier

@Daninater 3 жыл бұрын

Agreed. I wouldn't use an intuitive homemade ramp system like this as either, because it's more complicated and there's seemingly more to go wrong with the setup.

@sondoddy9275 Жыл бұрын

Yes and considering the possible cost of lumber or any material used plus time consumed making them, compared to what cheap jack stands cost i think they are quite reliable, cheap and good option for these home made ones. That being said on the other hand if you like making stuff that has pupose/use, then sure go for it

@imGlobL 3 жыл бұрын

Don't see the point In Jacking up the rear wheels

@jlsetnuper 3 жыл бұрын

Not necessarily, but for this car every time I change the engine oil or gearbox oil , I make sure that the car is level otherwise its overfill..thanks for watching

@imGlobL 2 жыл бұрын

JLS Etnuper how can you over fill it. If you loook in the owners manual and online. You will know that it takes 3.7 litres of motor oil so I don't see how you could over fill it