All remember the 11th hour on this very important day. Never forget their sacrifice!!!!!

Don’t worry Mike... I put my safety glasses on while watching and eating my cereal. 😂

I'm calling this Mike having too much fun with the mower part 2.🤣🤣🤣

Perfect demonstration of the Fendt Vario CVT. Get any speed just by a tip on your joystick! 👍

You are one hard working farmer for sure! I am impressed with your never ending desire to improve the farm land! Keep at it and thank you for your honest, real life videos

I could watch that for hours. I love your narration too! It's amazing how modern equipment makes such easy work out of what was a difficult task in the past.

I love seeing him start power to mower low R.P.M. then turns speed up. Shows care and respect for equipment.

Time for a gen7 700 series. These optionally come with reversible fans. Awesome to see what that mower is capable off. Keep up the work 👍🏻

Mike, love the channel! Wife and I have a child same as Chapel. It's so awesome watching Ashtyn and you farm and start a family in these times together. ❤️

That mower is a beadt. Thanks for sharing Mike.

"it is october something, today" - right at the get-go, mike has me in shambles. keep being you, you weirdo - we love you for that

That’s a sweet unit mike! I recently just picked up a similar mower and was told to never have a razor sharp edge as it will constantly get beat up from mowing brush or hitting the odd rock. The mower relies on the speed and weight of the blades to cut so having an 1/8th “ to 1/4” bevel on the blade edge will make it take a beating much better and hold its form compared to a razor sharp edge which is more desired on a finishing mower. Keep up the great videos!

Your mower does a nice job Mike!

It will be interesting to see how many of the sloughs will be full in the spring since the current & forecasted amounts of snow in central Saskatchewan looks like a good winter to have a snowmobile. Should be good moisture in the spring for crops.

Sitting here thinking I would shut the window mike. I would buy a window vs going to hospital and if you break the window and go to hospital then you really messed up. I love those mowers.

great stuff Mike !

Hi Mike, very nice job.

Shulte is watching this and thinking.. shoot!.. now we should start building combines! Mikey likes it!

Nice looking mower Mike

Going backwards is a sure way to find a freshly cut stump with your tractor tires. The back glass open is puzzling to say the least, lol.

thanks. Need to make sure in walk around that it's not jammed with dust etc

Its good to see new farmland being created.

Those willows can be sharp when you mow them, you lucked out by not putting the stumps through the tires

Content is awesome love that mower

Great video Mike

haha i love the willow taunt at the end lol

Great video, I could used that setup for a day

Hi.. Today i watch your first time at 7 ' 0 clock in morning and now its 2 pm. i am still watching your videos Sir I love your way of giving knowledge Love from Pakistan

Mike, just want to say that I would do the exact same thing if I was in your shoes: I would mow down those bushes and do it with a passion. My fields would be Clean!! Oh and safety first? LOL! Have a good one Mike!

Mike, instead of backing up to cut brush, like they do in India and Nigeria, just drop your full-width bucket to the ground with a slight upwards tilt of the loader, put loader arms on "float" setting, then you can go forward and cut the bush going round and round. (these two videos have been painful to watch).

You’re braver than me. I don’t go back forward. I go around and shave the same direction. It never fails. There’s that 1 that didn’t cut off. And up through the tractor it goes. Lol

I'll be doing some of the same...only I'll be using my D8 to shave it right off to the ground...it's hay ground so no need to get the roots out yet

Very good mower, very solid ! Nature will eat up those little pieces !

Amazing!

Magnifique matériel agricole et le tracteur et le broyeur est bien

a great sharing.

I like the way it looks after you've been over it several times but the process is rather painful for me. FECON.

I use to hate mowing when we farmed on a open cab tractor.

From Soth. Aust. The mower is obviously doing a good job, otherwise you'd be staking a few tyres. I'm interested in finding out what problems you could have when the country is first cultivated and how you'll handle the stumps/roots. Or will they be pulverised too.

You just need a 30 foot high tiller to turn those trees over

Hey Mike,Being naturally curious I looked up the Seppi equipment,incredible,nothing that they can't process,pricey yes but the end result is superb.Almost made it to your nieghborhood "Shaunavon" this summer,maybe next year. C.J. Thunder Bay P.S. Was reading that harvest yield was fairly high in a 10 year average,even with the SW being poor,is it the same info you are hearing?

Nothin’ party’s like a rental. 🎉

I am really impressed that the mover/mulcher doing such a good job, as it has only 2 blades. I thought at first that this can’t work, well looks like I was wrong. But I think that the kind of mulcher we use in Germany would do a better job. Because they are shredding the material. Have you ever considered testing a mulcher from Dragone or Dücker or any kind of flail mower?

Hi Mike! I noticed near the end, when you were stopping the pto, that the main shift coming from the tractor has a very large wobble going on. Isn't that really hard on the yolks/bearings? Great video!!

Great video

Hi I'm from India love you

Hey Mike those cuttings are packed with dormant buds. Willow can be grown by just shoving a twig of it into soil and those dormant buds take over. Just a heads-up for when the cuttings are mixed into the dirt at the end - weedkiller of sorts should save the day if they grow again.

That’s one tough mower! Not sure the rental company will be too happy when they see the video of what you have been cutting though 😂

I ran one of these for 13 years,for scrubbing brush like that it always cuts easier and cleaner in minus C weather.

95 % sure thats not the intended use case. 😂

I bush hog rocky areas a lot. First pass over. I run the front bucket about half inch above ground and creep through. It’s great to find stumps and stuff before it gets to your tractor and bush hog.

Yacking finally stops at 9:15, then cutting finally starts.

Every plant is a weed if it is in the wrong place Mike !

I was definitely wondering why you were backing over it. Time is free, a new paint job isn't!

Brian Brown's dad would be in seventh Heaven with all those willows using their excavator with the new brush cutting / Mulcher attachment on the boom. Ivers Farms also have a handy piece of equipment that would work great on that project.

My great grandfather made the ring around the blades because if you hit a rock it can bend your blades up and they can cut through the deck

Be avare, when you fold wings. All trash falls in the center piece. Next time you lover wings there is possibility that you bend PTO drive shafts.

Don’t be gentle.. it’s a rental 😂😅

that schulte mower cuts good, and i understand why ya got it Mikey, but imagine the dream of mowing it with a degelmower and a side arm! swinging out to the side and not having to back up into it all, no worries of rocks lauching at your rear window (not a fun time when they go out) and no bent blades unless you try to mow a literal boulder lol but i get it. also, it's coming back to farmland nice my dude!

They should put push bars on the back of all brush hogs for this type work especially .

There are cattlemen who do this too. They will put cows in a rough spot for a day move them then mow behind cleaning up the brush and weeds then the next time they are rotated to that area the grass gets better and better

You should have one more to the front pto

11:09 - you should be very careful about changing directions like this! I work with forest machinery, and it is while changing directions that a lot of branches find an opportunity to search out your delicate electronics or hydraulics. Those branches you just laid down, will now act as attacking grounded spears, that will search out every vulnerable crevace of your tractor. I might want to continue backing out, turn around and back right in again the other way. This way, the blades do their work before your expensive tractor gets there.

Is it mainly blade style mowers used in North America for scrub land like this? As over here in the UK and Ireland not so sure about the rest of Europe that flail style mowers are usually the most popular for this type of cutting or heavy brush and ground that hasn't been maintained in many years

Will the ground freezing solid finish the willows or will they be back in the spring?

Morning

Howdy mike

Be careful about letting the grass build up on your deck under the wing drive shafts. When you left the wings up the grass will fall under the shafts then when you left the wings back down the grass will be too high up under them and will actually bend you drive shifts. Ask me how I know lol

Hi Mike . why dont you put anti smash and grab on our windows we do tree felling and put it on our back window of our trucks and never had a problem again it comes in clear

But of course. Test the limits of something that isn't even yours. Derpiness of Mike knows no limits

Isn´t the covers on the pto shafts supposed to not spin ?

The new gen 7, 7series has the reverseable fan.

Bonjour mike il vous faut un broyeur de marque bugnot ( France) broyeur forestier et cailloux et ça sera comme un jardin Le plus simple il faut y allez en marche avant pour broyer pour information il y'a un vendeur au Canada pour les broyeur bugnot

Does Chapel mind the whisker burn he may get when you cuddle with him 😂🤣

Can you show us a google map of the farm? How many slews you have ?

Some farmer way back in the day worked his ass off to make that field farmable only for the duck guys to ruin the place 😅🤦‍♂️

LoVE💕💕💕💕💕💕

It is October something today...🙃🙃🤣

Why not lower the loader to push the stuff down far enough to not get caught in the screens? If you covered that I missed it

I wonder if an old forager could do the same job just faster 🤔

Hello Mike your pto sure shakes lol😮

Better off to pile them up and burn them. Then disk it with a heavy breaking disk. Less shrapnel to deal with. Still looks fun tho

Well Mike that takes a long time before you are don.😉

I can see a puncher looming lol

What’s the serial number? Don’t want to buy that one second hand!

I've lived in a farm for 55 years. Going slower bushhogging always works better.

Stupid question Mike but could you mount a flail on the front and drive into the willows. Can't recall if you have front linkage 😅😅

Hey Mike, could you give us an update about the 1167. Your first impressions seemed quite good. But a final video would be very nice. Greetings from Germany

Once the clutch is smoking once it is prone to fail. If u know u know

My luck I would put a stump through a tyre done it several times on my farm

When you are smashing up all those cattails/bullrushes, aren’ t you spreading a “zillion-trillion” fluffy seeds to start growing next spring?

Mike please clean off top of the mower my OCD is getting to me. LoL

No PTO shaft guards used in Canada?

Hey Mike: I think after showing this on youtube if you have problems the warranty is off. I don't think that a bat wing is intended to chop down trees.

Evening

I assume that is under warranty for some time eh?

If you was in Florida Mike there might be a rattlesnake or a cottonmouth in there definitely a few nests of fire ants those fire ants would be up your pant legs in a heartbeat

Stand in the face of enemy fire and never flinch, but squeal like a girl at the site of a mouse 🐭 pitiful, pitiful, pitiful!😊😂😊

If you ever read the op manual they say never never mow in reverse. Duh

Did you enquire of Ducks Unlimited as to leasing those pothole acres?