The Deployment of IP PBX & IP Phones in Local Area Network

Рет қаралды 94,733

Күн бұрын

How to deploy an IP PBX together with an IP phone, and a SIP trunk in the #LAN? - This is the FAQ from many of our end users.
Therefore, in this video, we’ll walk you through the deployment of IP-based devices to build up a #VoIP telephone system in the office. We will make use of the following devices: a switch connected to the local router, a Yeastar S300 VoIP PBX, a Yealink IP phone, and a laptop for configuring all these devices.
-------------
Chapters
00:00 IP PBX in LAN
00:18 What is LAN?
01:18 Task 1: Set the network interface of the device.
03:15 Task 2: Connect the LAN port of the #PBX to the switch, and connect the laptop to the switch.
03:44 Step 1: Connect the IP phone and switch with the port internet
03:55 Step 2: Configure the SIP dedicated trunk on Yeastar PBX
05:21 Step 3: Connect the network cable to the WAN port of PBX
05:28 Step 4: Configure the static route on the PBX
Last but not least: Reboot the PBX to make all configurations work.
If you would like to know more about Dedicated SIP Trunking on Yeastar S-Series VoIP PBX, please go to our online document center here: bit.ly/2E0uPmr
-------------
Subscribe to Yeastar's KZfaq Channel: bit.ly/46kiZuc
Visit Yeastar's website: bit.ly/3GqEbEn
LinkedIn: / yeastar
Facebook: / yeastar
Twitter: / yeastar
Instagram: / yeastar_official

Пікірлер: 37

@bharat9234 11 ай бұрын

this is the eye-opening video for beginner.

@gayathripatel527 2 жыл бұрын

Thanks for the valuable information 👍

@muhammadasifkhan1205 3 ай бұрын

Thank you for the valuable information

@DesmanPositif18 3 жыл бұрын

Thank you information. So usefull

@lostman555 11 ай бұрын

Very informative 🙂

@uthatoesak6847 10 ай бұрын

thz for ur information 🤗🤗🤗

@justinmukinani2404 Жыл бұрын

tks so much

@smtboystkt6586 Жыл бұрын

Super

@sayiedalial-darwaish6850 Жыл бұрын

Thank you for this video. What about the configuration when we we have one either net cable for both voice and internet. What will be the configuration in the IPPBX and the router if required. Regards.

@YeastarTechnicalChannel Жыл бұрын

Hi, is it a dedicated sip line? You can search for the guide of it on help.yeastar.com about it. If you still meet an issue setting it up, feel free to create a ticket on support.yeastar.com.

@khulekani_dladla 3 жыл бұрын

Beautiful tut

@lyricgary5696 2 жыл бұрын

i dont mean to be offtopic but does any of you know a way to log back into an instagram account? I stupidly forgot my account password. I would love any tips you can offer me

@casonrandy7264 2 жыл бұрын

@Lyric Gary Instablaster =)

@lyricgary5696 2 жыл бұрын

@Cason Randy thanks for your reply. I got to the site thru google and I'm trying it out atm. Takes quite some time so I will reply here later when my account password hopefully is recovered.

@lyricgary5696 2 жыл бұрын

@Cason Randy it did the trick and I actually got access to my account again. Im so happy:D Thanks so much you saved my ass !

@casonrandy7264 2 жыл бұрын

@Lyric Gary you are welcome :)

@laminsanyang8466 10 ай бұрын

Thank you @yeastar this video is very informative, my question is will the SIP and IP phones work in LAN environment without internet?

@YeastarTechnicalChannel 10 ай бұрын

Hi, it is up to you whether you need the Internet for the SIP trunk for external calls or not. If you are using PBX for internal calls only, sure you can use it without the Internet.

@igramz 8 ай бұрын

@@YeastarTechnicalChannel what about the traditional PSTN lines or Analog pbx and how to connect it to Yeastar pbx

@tamalbag5826 2 ай бұрын

❤❤❤❤❤👍👍👍👍

@hybridcar4144 10 ай бұрын

hi , good to see yeaster . could you please tell me if i want to teminate the calls from another country to this ip and going to end user is it posible ?

@YeastarTechnicalChannel 10 ай бұрын

Hi, we can distinguish the different caller ID by Caller ID Pattern Setting on the inbound route. And you can set the destination to what you want.

@infopc-arieh6372 3 ай бұрын

Networkdesign would be nice ...

@tarekmostafa8727 2 жыл бұрын

Hello can this phone get the IP address without me configuring it cuz i want to use it as plug and play in the network where it receives ip address over dhcp . And the ont do registering for the IMS not IP Phone is it possible?

@YeastarTechnicalChannel 2 жыл бұрын

Hi, the phone can get the IP by DHCP. As for the PBX LAN port, the default IP is static IP which is 192.168.5.150. Although you can set it to DHCP after you log in with 192.168.5.150 I suggest you use at least one static IP so that it would be convenient for you to log in to the device. And of course, you can use DHCP for IMS on the WAN port. For register IP phones, we have auto-provision to register the phone, it is convenient. You may refer to our help guide about it if you want.help.yeastar.com/en/s-series/topic/auto_provisioning.html

@bradfordtechnology-interne3184 Жыл бұрын

I hit an issue with getting my YeaStar NeoGateway TS 400 ATA Analog PBX to receive S.I.P. Trunks Invite after updating Cudy AX 1800 router "FIRMWARE". My S.I.P. Provider's Tracing showing on their my phone is ringing, and YeaStar is telling me that the port Invite Packet of the call is sent back. YeaStar think it must be the Cudy AX 1800 Router porting issue. I had everything working with it on two other router Linksys and NetGear I believe after I setup through the DHCP method. I would appreciate any and all troubleshooting advice.

@YeastarTechnicalChannel Жыл бұрын

@@bradfordtechnology-interne3184 Hi, plz create a ticket on support.yeastar.com so that we can know the detail of the issue. Our technical team will help with it.

@orlandosantana3867 Жыл бұрын

Hola tengo una s100 con teléfonos T19P E2 y T21P E2. Los T19P E2 funcionan de maravilla inclusive a más de 90 metros de distancia en cable. Pero los T21P E2 solo funcionan con un cable de red a 5 o 10 metros de longitud. Si sobrepasó esa distancia el teléfono enciende pero no da IP. Y muestra el error "RED NO DISPONIBLE". alguna sugerencia? Será que estoy haciendo algo mal.?

@YeastarVideo Жыл бұрын

Hi, there should be something wrong with the cable line. Just make sure your network is reachable first and then you can use the IP phone. You can try to ping PBX on your IP phone for testing.

@orlandosantana3867 Жыл бұрын

@@YeastarVideo hello. The cable has been checked and is in perfect condition. tests were carried out with a 60-meter cable and the phone turns on but still does not continue with the ip problem. then with the same 60 meter cable in T19P E2 models they work without problems. none of the T21P E2 work.

@YeastarVideo Жыл бұрын

Hi, if the cable line is okay, I suppose you have to contact the "T21P E2" IP phone support for help. It is not related to PBX. Plz make sure the network of the IP phone is okay and you can use this IP phone with PBX. Any other questions you can create a ticket on support.yeastar.com.