Yes I'll Be at the Offroad Games - Pimp My Dad's DREAM Truck Pt 9

Рет қаралды 51,414

3 ай бұрын

People keep asking so yes, BleepinJeep will be at the Off-Road Games put on by Matts Offroad Recovery. If you Haven't gotten your tickets here is the link: offroadgames.com/off-road-games. It is March 14th-16th. Other than that announcement, we continue on the surprise build of my dad's 1991 Toyota pickup.
*********************************
Pimp my Dad's DREAM TRUCK Series:
Part 1 - Next Build: • Next Build - Pimp my D...
Part 2 - Tear Down Stage: • Tear Down Stage - Pimp...
Part 3 - Rebuild Phase 1: • Dad's Toyota Axles Nee...
Part 4 - Front Bumper and Fender Flares: • This Bleepin Yota is C...
Part 5: How-To Build a Roof Rack: • How-To Build a Roof Ra...
Part 6: Re-gear Day: • Its Test Drive Day for...
Part 7: Restoration out of hand: • Toyota RESTORATION has...
Part 8: Nobody Would Paint Yota: • Amazon's Cheapest Pain...
*Part 9: Yes I'll be at the Offroad Games: • Yes I'll Be at the Off...
Part 10: New LEDs, Old School Charm: • Holley Retrobright LED...
Part 11: World's Most Expensive Toyota Pickup: • All Finished Up - Pimp...
Part 12: The Reveal: • Surprising My Dad With...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discou...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on KZfaq: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Пікірлер: 187

@its_me_JZ 3 ай бұрын

"You're whisper yelling" "The neighbors are over there" "so" 😂 I've day dreamt about recording KZfaq videos, and this is one of my biggest fears. The neighbors hearing me out of context 😅

@JonnyDIY 3 ай бұрын

Lol i still get a bit embarrased talking to myself in the front yard or driveway. I moved a couple years ago too and had to re adjust to new neighbors being like wth he doing? 😂

@sparkycushman578 3 ай бұрын

My brother and I restored my dads 1953 BMW R51/3 motorcycle. Unfortunately he had passed years earlier. I wish we could have shared it with him. Much respect to you and Josh for your effort, I'm sure your dad will be grateful for the effort more than you know!

@ChuckBruton 3 ай бұрын

I wish…. My 94 RAM 2500 4x4 5.9 could just get the rust fixed … love that truck !

@MacsSpecialitiesMotorsports 3 ай бұрын

The back up light debacle was great!

@johnstancato8785 3 ай бұрын

Definitely put the bottom guard on the Bull bar

@thomascornett3348 3 ай бұрын

Your Dad is going to Love all the hard work you all have put into this truck. Great Build 🎉

@bleepinjeep 3 ай бұрын

thanks!

@aaronb7990 3 ай бұрын

😎🤙 The door card clip was great.

@sprog000 3 ай бұрын

On your Comanche Jeep you could upgrade your windshield by putting a windshield from a newer Cherokee 96 with a newer rubber gasket. You would have to grind off the old studs for the old metal trim. The older glass is slightly larger than the newer glass So you have to use the 96 glass to accommodate the new rubber trim.

@calvinh.8882 3 ай бұрын

With all the older Toyotas I've owned, I always got some roll-on rubber coating and rolled two coats in the inner fenders, where you were saying looks dirty now that everything else is new. I mainly did it because I hated hearing little rocks and dirt that came off the tires hitting that bare metal, but it also looked much better being black. His truck looks awesome! You two have done an amazing job on it, I know your dad is going to love it.

@ggalland1 3 ай бұрын

More and more awesome every episode!! Can't wait to see it out in the sunlight with that awesome paint job. Thank you for sharing

@bleepinjeep 3 ай бұрын

More to come! It's almost done then we will reveal it to him in April

@joeeyman7503 3 ай бұрын

Stick a small piece of paper over the socket and force the nut into it. It will hold doing what you did on the bumper for the light fixture. Love the videos and what you’ve done to your Dads truck 🛻❤️🙏😎🤙

@bleepinjeep 3 ай бұрын

Great idea

@ephjay6t87 3 ай бұрын

I love that Cadillac Grey. Much nicer than black. Thanks for saving another classic Toyota. I am not a fan of new trucks so a renewed old one is the best thing.

@timbyram8254 3 ай бұрын

Radiator combs work well. Mine has about 5 different ones for different width radiators. Dont use it often but when needed it is priceless.

@scottcummings8074 3 ай бұрын

It's a bumpy road with y'all! I've had a lot of ups and downs with time to watch your channel, but when I see an episode, it's shockingly great!

@bleepinjeep 3 ай бұрын

Welcome back! Stop leaving us.

@robertoperezjr.1119 3 ай бұрын

You could have used a straw for the nut on the back KC lights. Put the straw in the hole and put the nut over the straw.

@slopsec2358 3 ай бұрын

I had the 89 version of that truck, with the v-6. Absolutely loved it. Although later I started buying F-250s for the room, that truck was undoubtedly the best truck I've ever owned.

@miked5789 3 ай бұрын

With... Either way, PapaBleepin's gonna be over the moon with it.

@Hillbilly-zn6lx 3 ай бұрын

I LOVE that color on pop's pickup! Great choice guys....

@Introverted_Outlander 3 ай бұрын

The horn segment of this reassembly of the truck reminds me of the music maker brand General Lee Horn we had on one of our cars as a kid.

@coltonupchurch4368 3 ай бұрын

I love the part where you acting like you were watching fab brats😂😂😂😂😂😂😂 I laughed so hard till I started crying. The whole skit was great😂😂😂

@Poweraddicts 3 ай бұрын

Hey Matt and Josh, hope all is well with y'all and good chatting with you at Jeep Invasion. For those pits in the fiberglass topper, you can use Capiseal powder. It is a silica powder/filler that mixes with fiberglass resin to fill pits and gaps in fiberglass parts, you can mix it to any consistency you need. It is harder to work down than bondo/body filler but it bonds to the original fiberglass much better with little to no chance of cracking or separation. I have about 25+ years in fiberglass repair, and custom mold design. Obviously, you already have the topper done but I wanted to drop this in for future reference if needed. Y'all have a great day!

@maryshandley403 3 ай бұрын

You guys are doing a great job on it. And it is for your pops. That’s why you are doing it.

@paengsolo2047 3 ай бұрын

Hey Matt you should have put a sound deadening material on the floorings

@MattsOffRoadRecovery 3 ай бұрын

That truck’s gonna look good on the dominator trail.

@bleepinjeep 3 ай бұрын

Ha, that would be some Whistling Diesel stuff wouldn't it?

@ephjay6t87 3 ай бұрын

Shots fired..

@aaronb7990 3 ай бұрын

@bleepinjeep to be fair, to break the things that you have broken while sending it takes a level of 'doing it for the gram' thats pretty high. I think part of the Bleepin Jeep appeal is knowing that you are going to throw Mechanical Sympathy right out of the window. It's the 'It probably isn't going to make it... so your saying there's a chance!' mentality. It makes for great entertainment.

@techniciantrar6923 3 ай бұрын

You gents are doing fantastic work. I bet none would have been possible without Hope.

@techniciantrar6923 3 ай бұрын

ps suck it mcfly

@MrBillsfishin 3 ай бұрын

Dads truck is coming along great. So awesome that you are doing all this for him.

@bleepinjeep 3 ай бұрын

Thanks 👍

@duanelawrence78 3 ай бұрын

I love it that Toyota is beautiful guys!!✌️🇺🇲

@georgedeedsnotwords2162 3 ай бұрын

Great job everyone ! Just missing a front license plate that reads " my toy yoda " 🤔

@thephilosopher13 3 ай бұрын

The fin combs work GREAT. Sometimes. They’re worth having, because when they do work, they’re fast and convenient. When they don’t work, you’ll always end up going with ole trusty (the pocket knife)

@bleepinjeep 3 ай бұрын

lol, so basically a pocket knife works just as good just slower?

@thephilosopher13 3 ай бұрын

@@bleepinjeep well you can pull the knife out of your pocket… or hunt around the shop for the fin comb you used that one time last year on the off chance it might work for this application lol. In reality, you usually use a knife or whatever to get the fins started back straight, then you use the comb to make them more even and closer to perfect.

@isomer13 3 ай бұрын

Whew… That's turning out nice. Nice details. Thanks, guys. Your Dad is gonna flip.

@oregonjeeper7977 3 ай бұрын

Hearing you call a 91 a classic just reminds me how old I am.

@timbyram8254 3 ай бұрын

Yeah, Ouch!

@bleepinjeep 3 ай бұрын

lol, just think about this, here in TN if your car is 25 years old you can get an Antique tag... Thats 1999 😅

@doughaven-rf8id 3 ай бұрын

Both my daily drivers qualify. '99 WJ @270k and '97 Chev 1500 @240K with no plans to update.@@bleepinjeep

@darrinrebagliati5365 3 ай бұрын

I graduated in 91. Makes me feel ancient!!

@petetheratman 3 ай бұрын

Yeah put skin plate on 👍 brilliant set of videos guy

@aarondavis1096 3 ай бұрын

At the end there the lunch lady sounds like the general. Lol

@bleepinjeep 3 ай бұрын

well she is the boss for sure!

@ephjay6t87 3 ай бұрын

@@bleepinjeep you are a lucky man. Always love her smiling face.

@MarkoMygun 3 ай бұрын

Love the promo your gonna send Matt, he's gonna be laughing so hard. You guy's are doing a fine job on your Dad's Truck. Josh is right ,your Dad's just gonna keep it in the garage he's gonna be afraid to get it dirty lol. Thanks for the video guy's can't wait for the next one.

@bleepinjeep 3 ай бұрын

Can't wait!

@metaldog7128 3 ай бұрын

Hoooooooo yerrrrrrrr that paint is Fantastic 😮 nice job josh 👍 matt i think you’re dad is going to be a little overwhelmed when he gets it back 😃

@garychaiken808 3 ай бұрын

Great job guys. Thank you 😅

@JonnyDIY 3 ай бұрын

9:47 🤣💕👏👍 I think La Cucaracha horn may have a couple of the horns mixed up, sounded a lil off PS- what was that bar Josh was heating at end?

@xfactor5876 3 ай бұрын

Sweet project!

@flyhead5972 3 ай бұрын

Hey guys, have you ever done a standard transmission to automatic swap on a CJ7? My old knees aren’t doing so well anymore. Your Dads truck is looking great and you two are a hoot to watch.

@steven.h0629 3 ай бұрын

Gorgeous 👍😎✊

@darrinrebagliati5365 3 ай бұрын

Put that little magnet inside the socket. Works good! Some sockets it'll work to put it on the side as it can be difficult to get the magnet out!

@xTinBenderX 3 ай бұрын

So nice! Bought a '91 new for 6995. Hopefully it doesn't end up getting taken to Mexico. I'd definitely look at a few anti-theft ideas.

@treya2403 3 ай бұрын

Heyy I got the same caulk gun my Ole man has been doing glass work for 42yrs this year and he cuts his tips the same way Its weird seeing someone else do it😅 but hey that truck is looking fantastic

@littleacorn98 3 ай бұрын

Fun all the time ✨️😁

@miniontj9497 3 ай бұрын

Got my shirt today. Thanks for the cow tail that was included!

@bookworm67-hv7nm 3 ай бұрын

that saying is for an old car ad with an famous eighties Spanish American day time actor in it and he says rich Corinthian leather for the seats

@johnnychaffin307 3 ай бұрын

looking good!

@stevea3936 3 ай бұрын

This is awesome. I wish I would have done something similar for my dad while he was still able to drive.

@brent042081 3 ай бұрын

I was a Glazier for many years windows residential commercial, vehicle. My specialty was custom shower installer..

@bleepinjeep 3 ай бұрын

So many questions, what is a custom shower? Is that a show-er or a shower like not a bath but a shower. English language issues...

@brent042081 3 ай бұрын

@@bleepinjeep sorry my mind went completely nuts remembering installing windshields. A Custom shower that doesn't come in a box, 10mm 12mm glass showers you would see in fancy hotels or homes

@larryfisher5796 3 ай бұрын

That is a good looking truck . I rebuilt a 83 GMC 3/4 TON pickup WITH A 454 V - 8 it took me six months 👍👍👍

@wayneullman5079 3 ай бұрын

Ricardo Montoban (sp?) used to advertise the Chrysler with Corinthian leather.

@bleepinjeep 3 ай бұрын

I'll have to see if there is a video on KZfaq

@davidwoermansr 3 ай бұрын

If you're patient radiator combs work great

@seriousmechanicing 3 ай бұрын

The windshield man has the best accent.

@TimothyDalton-rk1ve 3 ай бұрын

It keeps spewing out because you don't push the lever (the one that is designed to let the pressure off the trigger) with your thumb after you run your bead.

@chuckieswickedgoodfab 3 ай бұрын

this builds has turned out so well. Looks amazing. Definitely use the skid.

@briansmith1279 3 ай бұрын

Napa sells them they work great, from there ac parts.

@Kyle-ev4fk 3 ай бұрын

You guys are nuts, that was a nice truck before you started. I guess you are giving people ideas that have a truck that actually needs restoration.

@calebhamby5486 3 ай бұрын

I really can’t wait to see this finished and see your dads reaction. I hope I’m able to do something this special for mine one day.

@bleepinjeep 3 ай бұрын

I hope so too!

@bishop2678 3 ай бұрын

Yes they make a comb for that it’s in the hvac area

@bishop2678 3 ай бұрын

And yes it works great

@Wheelingoffthewrench 3 ай бұрын

I spin the socket on a grinder to make a thinner profile

@joshmacneal2545 3 ай бұрын

Can’t wait to see the video of you revealing it to your dad

@williamhughes2831 3 ай бұрын

I like your show and I like what you are building for your dad .I have not been Off-road I live in Pensacola Florida right now and I have a 94 Toyota 4runner 4x4 with a 5 speed transmission I need to know where I can get some more part for it

@neillacroix212 3 ай бұрын

Awesome wrecking games video!

@garychandler4296 3 ай бұрын

Bought a Dripless brand caulk gun from Homo Depot; had to order it because they charge the same for crappy shelf guns ($15) and don't stock them...a 3000 something with 3 letters I can't recall. It grew legs because someone liked it more than me, but I'll be getting another because a) it doesn't run on, and b) has a selector lever to let it run on, like when doing long runs.

@123chupadero 3 ай бұрын

very nice boys....

@trvlace 3 ай бұрын

The combs work well. They come in a set, may check a HVAC buddy and borrow a set

@alucarder 3 ай бұрын

Great video

@pigasus_1 3 ай бұрын

I want a horn with the Jamie Lee Curtis scream from Halloween

@bleepinjeep 3 ай бұрын

I dont know if they make that one...

@stangm33 3 ай бұрын

Guys maybe think about rhino line the floor board of the yota for extra protection

@brent042081 3 ай бұрын

Amazing job!!❤😊

@grisby6484 3 ай бұрын

All the commercials growing up pronounced it 'Bill-Steen"

@tomsomers1177 3 ай бұрын

Anchor Bolts next time!!

@djkincaid 3 ай бұрын

Great promo. Well done. BYW I'm impressed by your collection of WD40 products. When I was in Argentina in 1973 I came across the Argentinian equivalent. It was called KRAP40. Why did I not buy a can?

@bleepinjeep 3 ай бұрын

Lol, Krap40 really?

@speeding4fun 3 ай бұрын

should paint match those mirrors

@jamesbigham9036 3 ай бұрын

I always enjoy the outtakes. The question is which left 😂😂

@bleepinjeep 3 ай бұрын

Other left.

@JD-wt9jr 3 ай бұрын

In case you don’t already know, Toyota puts Bilstein shocks on the trucks from the factory.

@bleepinjeep 3 ай бұрын

No, I didn't know that. Guess it works out perfect then!

@Garth2011 3 ай бұрын

Those KC Lites are super cool in size and it appears in weather proof quality too. Nice wire loom they supply however, they have a super high price tag on them. Personally, I'd like to have them mounted away from center especially for backup lighting needs. One on the left and the other on the right most side. My only concern would be mounting them so they don't get knocked off from going up or down steep driveways etc. Once they are connected, will the current flow through the backup light switch or is the install going to use the supplied wiring loom and breaker? Nice finish on the paint work...very nice.

@bleepinjeep 3 ай бұрын

It will be controlled through our voswitch. We decided ppl in a parking lot might not like those bright lights every time you back up so it's an option to turn them on.

@Garth2011 3 ай бұрын

@@bleepinjeepGreat idea...allow the stock B/U lamps to still work then have the KC's on the factory KC wire loom set up. That will help with using it for utility needs, simple flick of the switch and the lights are on until the switch is turned off.

@Joshua-bp9nl 3 ай бұрын

One of my parts Jeeps came with the harbor freight version of that horn. It might be because the video or the wires melting, but i the harbor freight 1 sounded alot better.

@bleepinjeep 3 ай бұрын

ya I wasnt too impressed but it is VERY loud. Same guys that make those train horns.

@warrennash6663 3 ай бұрын

With front skid

@foygill711 3 ай бұрын

Damn I remember when kc lights were affordable.

@brandonb4462 3 ай бұрын

Everything looks amazing... But... That seat man... Looks like an amusement park ride seat... Needs a cloth 60/40 seat... They are so much more comfortable n look so nice

@inusa1618 3 ай бұрын

Nice truck, I came to same problem with a bolt that don't reach the other side and I used a bolt gauge male and female on the other side from Amazon and I used thread locker

@gkricheldorf 3 ай бұрын

Wet sand and buff the tail lights

@patbullard9276 3 ай бұрын

Those coil combs do really work. I have used them a lot on commercial refrigeration.

@ScottFidler 3 ай бұрын

Did you spray paint the coils after too?

@patbullard9276 3 ай бұрын

@@ScottFidler No, they weren’t sprayed to start with.

@michelewang6983 3 ай бұрын

Cool 🌼😄

@brettperkins4643 3 ай бұрын

Bilstein and Toyota go together like peas and carrots

@bleepinjeep 3 ай бұрын

Yuck 🤮

@jjmarz1001 3 ай бұрын

Your LEFT sign is pointing to the RIGHT for the oncoming driver.

@bleepinjeep 3 ай бұрын

EXACTLY 💯 %

@austinskidgel2690 3 ай бұрын

$450 for those 2 little lights sheesh.

@michaelcook184 3 ай бұрын

I wonder about the safety chains for trailer other than that looks great 😊

@bleepinjeep 3 ай бұрын

I'm trying to remember where we hooked up a trailer in this video...

@JonnyDIY 3 ай бұрын

@@bleepinjeepwith the backup lights is there still room for trailer safety chains to hook on?

@Horsewomann 3 ай бұрын

I used to hate it when my ambulance partner would clean and ArmorAll the bench seat in the back. Hauling butt to the hospital with a critical patient that I’m trying to do stuff for and I’m sliding all over!

@slickrock1371 3 ай бұрын

The seat back upholstery turned out nice; how'd you fix it?

@bleepinjeep 3 ай бұрын

I sent it back with the original and they corrected the patterns.

@rjm7168 3 ай бұрын

Your other left ... finger points driver's right

@chopperchuck 3 ай бұрын

grind a flat on each side of the washer

@bleepinjeep 3 ай бұрын

probably would have worked as well.

@jaylewis9750 3 ай бұрын

Y'all didn't want to sound proof it before Y'all put it back together?

@bleepinjeep 3 ай бұрын

I never thought it was that noisy in there.

@jameskappel 3 ай бұрын

👇I know why the shock absorber broke up with the spring? 👇👇 • The shock absorber craved stability, while the spring yearned for excitement. Their contrasting personalities led them to incompatible paths. 😂

@littleoldlady1863 3 ай бұрын

Hi I really love your show you really do a great job I will always praying 🙏 for you and your wife and your family and your friends ok you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox tell your wife hi for me ok

@bleepinjeep 3 ай бұрын

Thanks Lorilee!

@unclekory 3 ай бұрын

Hey guys truck looks awesome i have an 1990 truck and can not find a bully bar anywhere could you let me know were you got yours thanks keep up the work

@Jonnyoverweld 3 ай бұрын

Hey matt, i have a 12000lbs badlands winch with a steel cable. Can you do a vid on how to swap out a steel cable with a freadom winch line? I really want to buy one. But not sure if the swap is possible. Please help.

@bleepinjeep 3 ай бұрын

kzfaq.info/get/bejne/iZiIfNOX0N2bdas.htmlsi=2npa2STKJLQye107

@Jonnyoverweld 3 ай бұрын

@@bleepinjeep thank you very much!