Every suppressor manufacturer should be making videos like this. Thanks, YHM
@ashlandgunclub10002 жыл бұрын
In 30 years of working on firearms I have never had to remove a stuck mount from a YHM can. It’s an old design but it’s still one of the best even today.
@mathewthatcher62744 жыл бұрын
Wow. Really glad I watched this. There is a lot more going on in there then I realized but still a very simple system. Love it
@drewren12314 жыл бұрын
After using this, I really love the mounting system. Great work YHM!
@janwilliams1785 жыл бұрын
This video answers important questions before we need to ask. Great video!
@Jake-234 жыл бұрын
Most excellent technical explanation for component(s) interfacing! Subscribed, Thank you.
@sofloemir2 жыл бұрын
YHM absolutely makes the best stuff with amazing videos
@Don_Neto_Jr.2 жыл бұрын
Just got my t-2, great vid and I can't wait to get it to the range!
@russellbell44792 жыл бұрын
Very instructive! Cleared up some questions.
@peaceprayer5954 жыл бұрын
Very ingenious. Love it!
@muffemod4 жыл бұрын
YHM mount is my favorite by far.
@rustyshackelford63722 жыл бұрын
very educational, i already bought a t2 but seeing this while its still in jail makes me better prepared for when it gets out.
@dean91382 жыл бұрын
Same!
@tk42274 жыл бұрын
great demo!
@Super-Kuper2 жыл бұрын
my mount will start off tight, but after a few shots the can will loosen off and rotate ever so slightly like it's loose, but I cannot tighten it back down to the next tooth it just wobbles. When this happens my groups double in size compared to unsuppressed. 4302-28A with a Resonator Gen 1.
@kaziwill4 жыл бұрын
Can you guys team with VG6 and make a QD mount Epsilon?
@crazydoom3dude Жыл бұрын
Wicked glad I watched this video my tax stamp came in and haven’t shot it yet. I did the “two or three clicks and I’m good” that you said not to do.
@a.wheeler77314 жыл бұрын
Hi, could you guys do a video on how to properly mount a YHM QD mount on a barrel?
@leprechaunbutreallyjustamidget3 жыл бұрын
Is there some way to adjust where slop in the collar is instead of trying to pull the collar down and slide it over while trying it stop the suppressor from backing off in the process.
@wolffo9992 жыл бұрын
great vid - thx
@multicam_goth3 жыл бұрын
Would a NOX flash hider with with a resonator or Turbo qd Mount?
@tonyleos53122 жыл бұрын
Just purchased a Turbo T2 with the QD mount. What’s the length on this mount? With a 13.7” barrel will the mount make the rifle 16”? Can this be pinned and welded?
@sheriff25503 жыл бұрын
What is the flash hider, I don’t see it in on your website, all the suppressors come with muzzle brakes, and smooth flash hiders. Looking for the aggressive like in the video
@BearArmsChannel Жыл бұрын
That's why i only pin and weld all my rifles with these muzzles. So reliable and if i wanna use a different can just swap the mount
@Starkesea Жыл бұрын
I'm new to technical AR stuff but how can you swap mounts if it's pin and welded or what exactly is pin and welded to your rifles? The YHM mounts? Sorry kinda new to building firearms and just purchased a turbo 5.56 so gotta learn quick haha
@BearArmsChannel Жыл бұрын
@@Starkesea im sorry for the poor English lol. What i mean is the YHM suppressor mounts are all pinned and welded on my uppers. If i wanna switch out the suppressor all i have to do is the YHM QD system to a suppressor that uses the standard HUB adapter. Hope that makes a little more sense
@1clnsdime1 Жыл бұрын
Can u explain what portion of the locking mechanism will not let me use the new mini qd flash hider on my 223 ti phantom? I'm assuming the diameter is to large to go in the support? Is that correct?
@Irrigation_Tech_Talk Жыл бұрын
Are you going to do a video of the sec mount?
@everholdwelding2922 жыл бұрын
how do you get this suppressor off when its carbon locked?
@crazymonkey4592 ай бұрын
I want to use a R9 with the Q.D mount on a cz scorpion what flash hider would I use
@PaladinOfTexas2 ай бұрын
i sent my rifle in for a warranty claim with the muzzle brake still attached. they disassembled the brake fully stating that it was a lock washer and it wasnt recommended for instalation. how would i go about reassembling the muzzle brake?
@Tyler20754 жыл бұрын
No matter how hard I put the silencer on eventually it backs off one click with means the tapers are no longer connected
@YHMachineCo4 жыл бұрын
contact our sales department and we can help with this issue
@MrGible5 жыл бұрын
Question, I'd like to have the QD ability to hop hosts whenever I'd like, but is there a mount that allows for direct thread installation?
@YHMachineCo5 жыл бұрын
The new Turbo K we have that is about to be released to dealers within the coming months would be a perfect for what you're looking for. It allows for a direct thread installation as well as a QD mount. Here's the link: yhm.net/sound-suppression/rifle-suppressors.html They are the first 2 on the page coming with your choice of flash hider or muzzle break
@taskunitbruiser5 жыл бұрын
Is the qd mount included in your suppressor's weight, or in addition to?
@YHMachineCo5 жыл бұрын
it's in addition to
@haroldshiramizu95932 жыл бұрын
great video , but how come there are no videos showing how to remove the baffles for cleaning?
@ecobasetech45583 ай бұрын
Because this is not a serviceable can. You can't take it apart for cleaning. It's welded together
@czgunner5 жыл бұрын
How about a video showing how 5.56 suppressor can’t install on the 7.62 mounts?
@justindr.yaegertodd62203 жыл бұрын
The muzzle breaks are different size? I guess, YHM could create one muzzle break that would be universal?
@AaronBrand2 жыл бұрын
What about using the YHM QD mount and flash hider with a different brand suppressor? What is a good way to make sure it will be compatible?
@zacharygillette7810 Жыл бұрын
Obviously the farthest forward interface surface wouldn't be there unless the can had it or you modified it. But I think it would still click an obviously taper lock an threads would work fine as long as threads on the can fit the mount 75% of the benefits will still be in use. You just won't have the extra stability from the very tip of the flash hider/break interfering with the internal mount the yhm cans have.
@ToolsSNAPON4 жыл бұрын
I got my 30 cal Resonator yesterday, looks awesome and worth for waiting long time. My can are not have inner support system like a on video explanation. That's normal? Also, I'll shoot 8-10 round W/300aac 220gr subsonic. Little louder than my exception, it's any braking period or something? Any one has experience?
@YHMachineCo4 жыл бұрын
What do you mean? Our QD mounting functions the same across our entire line of suppressors (except direct threads)
@ToolsSNAPON4 жыл бұрын
I got the answer at phone call! Thanks for answering too... I’ll
@jasongerona55434 жыл бұрын
Is the QD Mount universal for all YHM suppressors; In other words would it work for a Resonator and Turbo, etc? Also, who do I contact if I've received the wrong size mount (I received a 5/8" Fine; I need a 1/2" Fine)?
@YHMachineCo4 жыл бұрын
The QD will work with downsized calibers. For instance: The Resonator will work on our 30 cal and 5.56 mounts but the Turbo will only work with the 5.56 mounts (aside from the newer Mini Muzzle Brake). You will have to give us a call in order to look into getting a new QD mount with the correct threading
@rehab4ff5974 жыл бұрын
@@YHMachineCo I've called -- no one is there -- automated response...
@YHMachineCo4 жыл бұрын
@@rehab4ff597 Our hours of operation are 7:30 am to 4pm est. We have sales guys in right now if you'd like to call
@RoscoeS-zo2cg3 жыл бұрын
Is it possible to pin and weld this flash hider without interfering with the function?
@chrisr.10392 жыл бұрын
@OfficialYHM
@km67314 жыл бұрын
Does this mount do anything for recoil without the suppressor or is it simply a flash hider? I have a gun that I am debating about taking the suppressor off since its so heavy to carry around and long and top heavy, but would be nice for table shooting and having the qd mount.
@YHMachineCo4 жыл бұрын
The muzzle brake version of the mount reduces recoil as well as act as a sacrificial blast baffle when used with the suppressor
@enb38102 жыл бұрын
@@YHMachineCo Looking at the 5.56 brake, the hole is quite large compared to my other 5.56 brakes. Is there a particular reason?
@carsonhunt4642 Жыл бұрын
@@enb3810I believe all their devices can fit up to 7.62 through them, so they are kind of “multi cal” , granted you choose the thread pitch for the barrel..
@DropsOne2062 жыл бұрын
On the turbo T2 Is it possible to run the micro qd brake on one rifle and the regular size qd brake on another and swap the suppressor between the two without making changes to suppressor itself or do you need the kurz kit?
@carsonhunt4642 Жыл бұрын
Did you ever get an answer to this? I also bought the long brakes but they are big and heavy so kind of want to pick up the mini flash hiders instead
@DropsOne206 Жыл бұрын
@@carsonhunt4642 unfortunately never got an answer or had the opportunity to try either way. My turbo t2 is still in suppressor jail after 11 months lol
@carsonhunt4642 Жыл бұрын
@@DropsOne206 damn sorry to hear lol, should be any day at least! I’m only 2 weeks in and haven’t even certified yet :/ I believe i found a simple answer, if the can you bought came with the full size qd, you’ll likely need to buy the kurz to use the small qd. Imo I’d just stick with the full size or go direct thread. Smaller qds won’t work as good and prob don’t secure as well as the full size.
@adambyers80104 жыл бұрын
My resonator is stuck to my QD mount. I applied liquid wrench. Wouldn’t come off. Shot more rounds to warm it up, won’t come off. Any suggestions YHM?
@justindr.yaegertodd62203 жыл бұрын
Don't send the full gun, but send the barrel and can. Do that if it's important, but why even take the can off?
@justindr.yaegertodd62203 жыл бұрын
**they answered the question further down the comments** You probably have to shoot more than you did... Did you have to wear gloves because it was sooooo hot? That, or get the wrench.
@TNRonin Жыл бұрын
I have a RESONATOR (R2) 30 cal in jail. I have a total of 3 YHM QD mounts. I didn't realize it but the YHM QD doesn't fit under my HG for my brn-180. Rather than replacing ALL of my QD mounts and adapter, can I remove the locking ring, and safely and securely still use this QD?
@Robertsmith-un5cu4 ай бұрын
whatever happened?
@TNRonin4 ай бұрын
I shot it without the ring while it worked it did not secure comfortably. I ended up moving to the SRX environment. Now I have to deal with a short SRX mount for my fat cat ugh!
@chemdog732 жыл бұрын
I am new to the Suppressor world and I purchased the resonator, I came home with the flash hider and I was trying to install it on a 5.56 barrel and the muzzle break would not fit. I shop is closed until Monday, anyone can tell me what I missed?
@BradMillsOK Жыл бұрын
Resonater came with a 5/8 muzzle device I would bet. So it won’t fit a 5.56 gun but will fit a .308 gun. Sorry it’s way late. Watching videos awaiting my first can/Turbo k’s arrival home. ATF approved 9/12. Still no stamp in hand.
@jonathanj4514 жыл бұрын
Do y’all have any videos with full cutaway or cross section. Always been curious to see the internals of YHM cans. Primarily the phantom
@YHMachineCo4 жыл бұрын
There may be some pictures of the old Phantom internals (We no longer make the Phantom cans). Stay tuned, we'll do some digging
@s-48group392 жыл бұрын
Idk why that locking just doesnt seem like its reliable. Has anyone had issues with this system?
@anythingadrenaline45154 жыл бұрын
Will this mount work with the Vox Armament suppressor?
@YHMachineCo4 жыл бұрын
If your particular VOX armament suppressor has the 1 3/8" x 24 thread pitch for it's mounting system then it will work in conjunction with our Phantom QD adapter
@TommyTombstone3 жыл бұрын
Yes, it works with the Energetic Armament Vox
@nathanpitt28115 жыл бұрын
Any recommendations for removing a carbon locked Turbo suppressor?
@YHMachineCo5 жыл бұрын
Put a strap wrench on it to try and get some leverage. If that fails, heat it up as much as you can to loosen the carbon build up
@Tacteyecool4 жыл бұрын
@@YHMachineCo how many more db does a turbo k have to ear then a turbo? Thx
@YHMachineCo4 жыл бұрын
@@Tacteyecool There's about a 4dB difference
@pseudonymous795 Жыл бұрын
Does not just twist off that easy - I’ve been wrestling this thing for hours and it’s STUCK. Help.
@goodluck2522 Жыл бұрын
Hit it with your purse
@pseudonymous795 Жыл бұрын
@@goodluck2522 lol, troll, didn’t want to ruin my manicure. Can’t take it off when hot needed to let it cool down.
@goodluck2522 Жыл бұрын
@@pseudonymous795 it took hours to cool down?
@pseudonymous795 Жыл бұрын
@@goodluck2522 yup - heat plus running it cause expansion and a carbon build up making the threads harder to unthread. Seems pretty common - surprised no one else has run into similar issues. You get the same issue when swapping out a barrel that’s been run often - it gets stuck.
@kristophergreen55442 жыл бұрын
take my money
@jjsemperfi2 жыл бұрын
I tired it but just couldn’t adjust to how ugly the muzzle devices are. Also I constantly had to rotate the collar because the teeth didn’t line up.
@kratic7696 Жыл бұрын
I can see these "teeth" wearing very quickly taking the can on and off to put the suppressor on multiple firearms.
@1x1nDone Жыл бұрын
Even if they did, they are built into the muzzle device, not the can, so it just gets replaced by another muzzle device.
@dontask89796 жыл бұрын
Sure wish that was a full cutaway... My eyes get tired of looking in the little hole.
@tonyleos53122 жыл бұрын
Just purchased a Turbo T2 with the QD mount. What’s the length on this mount? With a 13.7” barrel will the mount make the rifle 16”? Can this be pinned and welded?