Yeah dude this is a awesome video. Haters will say its boring. I think step by step video and not cutting out the video every couple seconds is so awesome to see. I can now do this swap myself. I appreciate the video

I like your videos man, very detailed. These are the type of videos I love to see!

Thanks for recording your install. Really sped things up here. I almost fell over when I revved it. It sounds so good! Video doesn't do it justice. Much respect.

That Yoshi Exhaust sound note is the best

Damn this was really thorough and well made video, I'm picking up my 2021 ZX6R tomorrow, I can't wait, upgrade from my Ninja 400.

This vid is extremely helpful. Good job 👍🏾

Great video but to give you some extra room and less dead weight you can remove the entire servo unit. All you need to order is a very tiny part called a ServoBuddy that tricks the FI system in thinking a servo exist.

Sounds good. Can't wait to hear it on the highway. Ride safe keep braaapin!

Love this video. Thank you for making. All the detail you out in made my install easy peasy.

I love the way mine sounds, I have the exact bike and put the same exhaust on. Fell in love with it instantly especially on the highway, good video bro hope you enjoyed yours.

great video, helped me out alot... I installed the Alpha exhaust today on my 2020 zx6r... its so much louder than i thought! (maybe too loud, i might install the baffle) at some point the servo swiveled, so the mechnism wasnt able to turn.. which triggered the check engine light... get a servo buddy!

I've got the same bike, same color and exhaust. I'll never sell it. Such an amazing 636cc machine. The only other bike I want is a s1000rr and a Ducati Monster or Diavel. Anyways, the Yoshimura is one hell of a pipe. I looked at all of them...Graves, M4 Street Slayer, Akrapovic, Austin Racing, SC Project, two brothers etc... but I wanted a classic Japanese exhaust for this beast of a bike. It didn't turn as gold/bronze as I had hoped but it still looks great after 1400 miles with this exhaust. The carbon fiber is excellent quality and finish. The heat hasn't warped it at all. All in all a very fine exhaust system, muffler and mid pipe. I recommend a ServoBuddy so you can pull the servo motor and cables out of the seat area, it's unnecessary and the included servo mod is kind of janky

I didn't scroll through all the comments but I wanted to offer a bit of info. The muffler installs behind the rear peg mount, not in front of it. it looks as though you installed it on the outside of the passenger peg instead of behind it. Just an FYI to the viewers. I can say even after installation of the servo plates mine threw a code anyway. Also just an FYI. I ordered a servo buddy. Otherwise, great video and thank you for posting!

Best install video for this zx6r model I’ve seen - Any updates on the power gained

Yosh makes the best stuff .

I've got every tool needed except for a 10mm socket. I don't know why those always seem to go missing, lol. Also, that spring puller tool is awesome!

Dude thank you for doing this video what a big help

Great video beatiful bike man i been waiting for this exact video👍

Not bad videos at all man, keep up the good work and you have likes from Jamaica.

much needed man thank you

Great job at making videos my friend. Keep it up.

thank you, I ordered a two brothers black series and I have the same bike I have to install it on. I'll definitely be using this video as a guide to do so.

great video 👍👍

That stock muffler is huge geezz...

Thanks for sharing 👍🏼👍🏼

Another great video! Just curious why you didn't go with Akrapovic? I like the look and sound of the Yoshi, but I wanted to know if you had other reasons, maybe something I didn't know about?

Very informative thanks 😊

Did you take off the servo cables or did you leave them on?? If you took them off were they hard to take off and if you ended up going back to stock were the cables hard to put back on?

Followed this vid step by step. Thanks, this was amazing! I had an issue though, my servo motor wont stop turning after installing the servo blanking plate. No check engine light, exhaust was installed properly. I ordered a servo eliminator already but eta is 3 weeks. Any temporary recommendations?

does anyone know the difference between this and the alpha 2?

Great video. Thanks

Hey, awesome videos. Do you have a link to the exhaust?

Two years later it’s 2021LOL I just bought actually got as a present the same bike as you and the same exhaust as you I followed your video step-by-step it worked out perfect I want to thank you for your detailed video however my check engine light is on and I’m curious to know why would set that off and what might fix that

Does anyone knows if Yoshimura alpha from zx10r 2019 would fit zx6r?

does installing only the muffler at the end simpler? i know it wont give the same result but i saw a couple of videos where people only remove the 2 spring and swap the end of the exhaust( the yoshi and carbon fiber end) and i was just wondering if you could of done that with that exhaust on this bike??

damn sounds great!

hey dude, i have not done the first service on my bike. do i need to wait for the first service before installinf the pipe? or can i just install it? thanks

Can you use this exhaust without replacing the stock resonator with that mid pipe? Looking to get a better sound but not too loud, thanks!

I have a 2020 r3 and that servo motor shit is interesting lol.. glad I didn't have that. But I am trying to upgrade to a 2019 z6r so I imagine I'll fuck with it soon

i have done the same thing to my zx6r 2019 but i also have cat delete the sound is so great and you can look at my video how its sound on dyno. have fun with the new yosi on your bick

just installed my yoshimura on my 636 and sounds great ! everything went smooth only question is , the stock gasket you re-used was it still attached when removed the old unit? i didn't see one when i took off.. just slid the piping through , explains maybe why it smoked a little when first turned it on? didn't after a second, third time. haven't ran the bike sounds good waiting on some fenders wraps if could please let me knw if install was done correctly! thanks bro

muito bom, top

Based.

sounds almost as good as my 1999 ninja 20 years later

What did you do with the Servo Cable? or the cable at the bottom where it was connected to the factory exhaust? Did you connect it to Yoshimura Alpha 3/4 exhaust? Did you get rid of it all together? It feels like that part was edited out. Thanks, great video. I appreciate this.

Did you have to do anything else to the bike (ie tune it) following install?

I’m looking to buy a 2019-2021 Kawasaki ninja 636 and I can’t find an under the seat muffler mod. What is it called?

I have the same exact bike, which model Yoshimura is this, sorry but I don't know much about it. Also I looked on ebay but it only shows the muffler, whereas you remove both sections, the muffler and the pipe under the bike, so I'm a little confused as to what I need to buy exactly. I loved your video though as I wanna do the exact same thing. Also is changing the servo a must?

What did you do to get rid of the wires on the bottom of the nike?

Question: I’m installing a M4 GP19 slip-on onto my 2021 ZX-6r and I’ll be eliminating the cat-converter along with adding the servo buddy. With that being said, is a flash needed? Does it ruin the bike in any way if I go without doing this? Lmk! Appreciate it!

What the difference with this and the alpha T2???

What did you record this on? And what did you use for sound recording ?

Don't you need that converter to pass inspection?

How long did it take to install?

I prefer the M4, at least for my likes. Nice video though.

I’ve just ordered mine! Seen this video a few times so just rewatching to familiarise myself! With the servo cables did you just pull them out? Or hide behind the fairings

Can I use this as a guide for install on a 2024 zx6r? Or is the install different??

Would you need an ecu flash after installing something like this ?

whats the decibel on this sir?

I just installed a aftermarket exhaust and my CE light is on do I have to buy a servo buddy?

Hey I was wondering is it a yoshimura alpha t slip on? Is it the regular or the race one cause they have like 3 different ones and idk what’s different wise

Is the Yoshimura exhaust ridiculously loud or just a deeper grunt? This morning I put the M4 GP on my ZX6R and I feel it is way too loud, it screams even at idle. I even thought the stock exhaust was loud, but I mainly wanted the weight savingfs.

I just bought my Yoshi, besides the servo, is there anything else I will need to adj? My buddy is saying I will need a power command block or something like that. Basically it will be throwing codes if I don't get it.

I live in Florida, am getting a brand new 2021 zx6r and I want to install this exhaust, do you think it’s way to loud ? Or if am going to have any loud noise ticket or problem or I should be good ????

Can the resonator stay on the bike for a smoother sound

Did that T25 come with the kit or did you already have that bit??

hey dude is removing catalyc converter need any kind of tuneup? or power comander?

top pena que aqui no brasil não tem e se tivesse seria muito caro

Can u buy those things separately on the servo motor?

Slip on or full system and have you did any engine twining

And the top one?

How loud is it?

Which tool u r using send tool box link

so I guess u don't need the servo buddy then?

My engine light came on after I installed it. How do I fix it?

I changed my exhaust exactly like you did but my check engine light is here. What do I do now?

Does it throw a check engine light after installing?

I had installed same exhaust a year ago I thought everything sounded normal no power lagging no check engine light nth but I stopped by a local motorcycle shop they said am running on only 3 cylinder because of the exhaust and recommended me a power commander and new spark plugs. What are your thoughts on that?

Cables just come straight out?

Do you have the link where you got that?

i'm between this or the gp19 M4

I got my 2018 last year and put an m4 exhaust slip on and other mods you might like check out my videos.

How can i get that exhaust?

Just have your ecu flashed and you can get rid of the servo without error codes and no servo buddy

I followed the process step by step but my check engine light is on

How did you get the bolts of the pre chamber loose? Those bolts are very hard to unscrew. You made it look so easy. That's very misleading. If your going to make a how to install video, be honest and thorough with the details and challenges. Don't be misleading.

Whenever you twist on the throttle, that little valve motor under the passenger seat initially opens/closes the valve in the stock exhaust. Now that you have removed it and bypassed it, I'm curious to how it works every time you twist the throttle since now it looks like it's forcing itself to one side. Can you check it out and let me know if it looks like it will break down eventually??? Thanks in advanced!!

Price?

Tell tool box name

You

17:18 thank me later

Next step id say is to remove the cat from the mainfold

*REMOVE CAT* 👍

That looks like shit BTW.