You CAN Fix your sublimation mistakes with a heat gun!!

Рет қаралды 16,409

2 жыл бұрын

Using a heat gun to lighten the image on a sub tumbler so it can be sublimated again.
Use my links below if you need any materials I used in this video.
1800 watt dual temp Heat gun: amzn.to/3DJ9wA0

Пікірлер: 33

@made.by.markia 2 жыл бұрын

Aww like father like son 😊 great video thanks for sharing

@TouchofClassCreations 2 жыл бұрын

Thank you, and thank you for watching!!

@justelleannrobinson7937 Жыл бұрын

I know this is nothing to do with the video but can you tell me where you got that printer stand I need that! Thanks for making this video great info!

@TouchofClassCreations Жыл бұрын

It came in a set with a matching desk from big lots a few years ago

@wendymottas3652 3 ай бұрын

What temperature in the oven? Do you have to use a convection oven?

@TouchofClassCreations 3 ай бұрын

In an oven I would cook at least at 365, in my oven I do at 400 degrees to burn the image off, and I do use a convection oven, usually about 40 min or so. Here is a link to a video I did using oven STOP THROWING AWAY YOUR SUBLIMATED TUMBLER MISTAKES! How to Resublimate a tumbler #reuseoldtumblers kzfaq.info/get/bejne/bZyga9Gl3celoIk.html

@shannonblackman467 2 жыл бұрын

We gotta be friends....I'm a BUCS fan too.... :)

@TouchofClassCreations 2 жыл бұрын

Heck yeah!! Go Bucs!!! I feel another Super Bowl run this year!!!

@karrensewell3768 Жыл бұрын

Did you use kiw med or High heat

@TouchofClassCreations Жыл бұрын

Hey there, I used high heat, thanks for watching!!

@ilovedanecook62 2 жыл бұрын

I have a heat gun but it's not very strong what is the minimum wattage for a heat gun

@TouchofClassCreations 2 жыл бұрын

I am not sure the minimum wattage on heat guns, I am by no means an expert, I would say it’s got to be able to heat up to at least sublimation temp, so at least 365, I would say any of the 1600 or 1800 watt ones they sell on Amazon would work

@ilovedanecook62 2 жыл бұрын

@@TouchofClassCreations ok thanks mines probably not that strong.

@ritaurbina8281 Жыл бұрын

How close are you holding that gun to tumbler?

@TouchofClassCreations 11 ай бұрын

Probably should hold 10-12 inches out, I might have been a little closer😜

@alicedonaldson4065 Жыл бұрын

What oven do you use?

@TouchofClassCreations Жыл бұрын

I use the galaxy lopo tumbler press

@ritaurbina8281 Жыл бұрын

Can I use a toaster oven just to bake off?

@TouchofClassCreations 11 ай бұрын

I am sure any oven for about 40-45 min at 400 will bake it off, just make sure u don’t cook in oven after, sublimation gasses can be toxic

@beckyphillips3008 Жыл бұрын

Will this work on a license plate as well?

@TouchofClassCreations Жыл бұрын

I have only ever tried it on a tumbler, but I would guess it would work on pretty much any sublimation hard substrate as the gas would cook off at the activated temperature

@karrensewell3768 Жыл бұрын

And how far from the cup

@TouchofClassCreations Жыл бұрын

As u can see in the video I held it pretty close, maybe an inch or 2 away

@ritaurbina8281 Жыл бұрын

Can I do this to a mug too??

@TouchofClassCreations Жыл бұрын

Yes, this will also work for sublimation mugs

@TheBestUni 2 жыл бұрын

🙋🏾‍♀️🙋🏾‍♀️

@TouchofClassCreations 2 жыл бұрын

🙋🏻‍♂️🙋🏻‍♂️💪 hey friend!! thanks for the share!!!

@TheBestUni 2 жыл бұрын

@@TouchofClassCreations 🤜🏾🤛🏼❤️

@annperz4132 7 ай бұрын

Was there a lot of fumes?

@TouchofClassCreations 7 ай бұрын

It wasn’t too bad, although I still think cooking the image off in an oven is the easiest if u have a little oven or tumbler press available. If u are sensitive to fumes I would wear a mask or do in a well ventilated area still

@Thecraftinggirlboutique Жыл бұрын

It would need to be way lighter

@Graeme758 5 ай бұрын

Just jump to 3.00 if you want to miss all the pointless waffle about ovens and where to buy a heat gun. Three minutes before he actually does anything useful. Oh, and save some time, skip to the end, it doesn't work.

@TouchofClassCreations 4 ай бұрын

The process does work, albeit not as good as cooking images off in an oven, however no method will completely burn a sublimated image off ( that I have found at least) and the pointless waffle is on all my videos, (so if u don’t like to hear me talk u should skip my videos entirely)I like to just aimlessly talk to those that will listen… lol!! 😂 thanks for watching and for your feedback!!