Omg perfect timing! I’ve been questioning my headlights at night

Same exact bulbs installed 15 months ago on an e90 and an e91. They are still working perfectly. They are much brighter than the originals.

Same bulbs I rolled the dice with. They work and look great for over two months now.

Ah perfect! I’ve had these for awhile but never put them on my e90 yet. Wanted to know how it looked on one. Nice!

changed mine like 6 months ago and the difference was huge. No idea how old they were but they looked a bit burnt. New bulbs Osram Night Breaker Laser Xenarc d1s.

Can vouch for these, I have the same one's. Been about 6 months, still working just fine.

Thanks for all the videos, this has been really helpful

thanks for the recommendation, bro!

This confirms it, I need new bulbs.. THANKS!!!

Bought the same ones here in Toronto - look great!

I've been using these for months now with no issues.

Hey man I always enjoy watching your videos learn a lot from you thanks keep it up. So I had to replace my driver side light and the only one that buddy had was in an accident and its pointed inwards can that be fixed I have the Angel Eyes adaptive headlights.

I would love to see you do a video on how to paint correct, polish and then ceramic coat the e90!

Awesome video! I was just messing with my headlights recently and when I tried to adjust the passenger side beam height, I found out my adjuster is spinning freely. Do you have any insight on what I could do? Thanks a lot, love your content!

Was going to buy some Osram CBIs but I’ll have to try these at that price point

Your the best love your videos

Waaaaaaaao! You actually read my mind. I was thinking on hitting you up to ask you about the FRM module and if it needs to be coded.

Do you know if I can use a higher wattage HID bulb on the factory 35W ballast? Thanks.

When I changed the bulb the bulb area pivoted down and was loose. I move it back where it was. no errors, but when I drive I can see my lights are moving/vibrating. Is that correct?

I believe the small opening BMW create is to not need you to take off the whole cover.

long beam BMW e90 LCI what kind of bulb is it? thanks

love your videos, I am from the houston area too

is it gonna work with a non-xenon light?

I actually replaced my E90s headlight bulbs with those light's. Worked ok for a few month's but then my left one burnt out way early.

Were there any error codes on the dash?

I have those same bulbs one went out about 8 months after. Waiting on replacements now . Also I'm pretty sure the reason OE bulbs are yellow looking is just because if their ~ 4000k color.

Hey, I feel that the Philips XV Gen2 D2S I have used in the DIY retrofit are losing their brightness. The thing is they cost me around $150 for the pair and it's a little over two years now!!! I'm highly disappointed, they lost like 50% of brightness already. So, I was just thinking about changing the ballast to see if there's any difference, but it looks like there isn't going to be any. In your case, did you just change the ballast along with the bulbs or only the bulbs? And what was the brand of the bulbs before? And after how many years did they lose brightness? Thank you so much!

When you driving with new one on the top middle you got some YELLOW color.... why?? I bought mine yesterday fit today and I've got same YELLOW color on top. With my old one same Celvin wasn't yellow top LINE or YELLOW MIDDLE??? Why is that??

Love your videos!!! Did you retrofit lci headlights???? Also what angel eye bulbs are you using I need to upgrade mine as I have a bulb out and mine are yellow and can’t decide on what to get is there any brand or bulbs you can recommend?

Thanks for sharing. Would like to know if possible to reaim the headlights as well (my car is also lowered)? I assumed the auto leveling function takes care of it? please make a video on that, thx

I love you. #335i

You mentioned adjusting the angle of the lights, will you be showing us how in a future video? Because I believe one of my headlights is angled downwards

what year is your car brother ? love the vids !!

I wish I'd seen this before I spent a lot of money on some OSRAM bulbs last year. Keep us updated on how those RCP bulbs hold up over time.

Hi, I am surprised that you use the same diesel oil as I use on my BMW 35D! Is it good for gasoline engine as well?

good to see actual road test before and after, "Manual" Why would u want manual?

Nice video but personally I wouldn’t recommend RCP. I recently used their brand for some led fog lights. After a few months, the seals inside the housings weren’t sealed that well and the insides of the connectors corroded to the point of flicker/error message. I just don’t believe RCP lights are rated for colder climates. I would suggest oem Philips/Osram xenons, you just can’t go wrong with those.

2011 335 will fit? thankyou

my left headlight stop working, only helps and day time running light work, does anyone have any idea what it could be? I replaced both bulbs

what happened to those rims?

It would have been nice if you compared just the bulbs to each other once you got the original OSRAM bulbs removed, just to note if there were any labeling or physical differences. Also for the comparison shot beginning at 2:34, getting both bulbs in frame would have been beneficial because the camera can automatically adjust things like exposure and white balance. If they are both in frame then it levels the playing field. The price of those bulbs you used is much lower than the comparable name brand. Best price I can find for the OSRAM 66140/66144 (I don't think they make the 66142 any more, or is it an OE only part) is about 45 USD (for a single bulb). Considering the price difference I hope they last for you. My original bulbs have 180,000 miles and 13+ years on them. All bulbs are subject to degradation over time, but they do still work. Not saying there aren't deals to be found out there, but OSRAM is a state-of-the-art lighting company. It's not like when you are looking at ECS and they have a BMW part for one price and the same part branded with the OEM name instead for half the price. The TRW M3 control arms are a good example. If you buy the TRW brand you get the exact same arms, someone has just ground off the "//M logo" with a die grinder because they legally can't sell them as TRW with that logo. They are produced in TRW's factory under contract with the "//M" logo licensed from BMW. It's just a legal issue. The arms are the exact same. OSRAM is the OEM so they don't contract their manufacturing to another company. The bulbs you bought were probably copied and then produced in China. They can sell them for cheap because they don't need to cover all the engineering costs OSRAM would have spent developing the bulbs. You might see them offered using different brands on Amazon or Ebay but they probably come out of the same factory in China. I am not trying to criticize your decision to buy these bulbs, its your money and your car - live and let live. I just wanted to add a little context about the R&D that OSRAM and all OEMs needs to pay for to develop their products. I am a product design engineer and this issue is close to my heart. What your are paying for when you buy OSRAM or Phillips DS1 HID bulbs is the payroll and overhead for companies to produce products in factories up to western health, safety and environmental standards (both OSRAM and Philips are MFG in Germany). The workers then go home and put food on their tables for their families whose kids go to a school that teach them facts and not propaganda. They have access to the actual world-wide-web in their schools and homes, not a censored version. They can be critical of those in power without fearing for their lives (see: Hong Kong). People in China gotta eat too, but as a consumer I am going to prefer work and cultural standards of western companies instead of Chinese ones. I don't have anything against the Chinese, but I want to use my dollar to make the choice. That is capitalism. The unfortunate truth is when you buy cheap stuff from China your are perpetuating the copy and produce cheaply industry. Amazon just wants your money, they don't care where the products come from. You can't even buy NGK spark plugs from them without worrying if they are knockoffs.

I dont think it a particularly fair comparison if you're changing old 4300k bulbs with new 6000k bulbs. Would have wanted to see like for like replacement

Are the e90 bulbs the same for e92

Let us know how they hold up. You paid $50 vs $170 for Osram OSR-39663.

Aftermarket HUD?

SYLVANIA D1S High Intensity Discharge (HID) Bulb

What is that digital glass speedometer on top of your dash?

They gonna last you few months save your old ones 😁

After 2 years of using these bulbs, 1 bulb died. Lasted 2 years with minimal driving time. Not reliable! Now looking for other bulbs.

Do u wanna sell ur e30 m3

I put 8K in mine

So we are just gonna ignore the free gloves and not use at all?...lol

Mine is £80

Your heads are aimed too low...just my opinion

no way id buy hid bulbs for 25 bucks...china