No video
INNOVATIVE TRACTION BAR - CB7 ACCORD BUILD Episode 4
Рет қаралды 5,926
Күн бұрынSUBSCRIBE:
bit.ly/2HVBjSQ
Episode 4
Project CEE BEE - H22 Accord
Today I install the Innovative Traction Bar to help tighten up the front end.
Please subscribe for more videos and to stay up to date on my project.
#h22accord #innovativemounts #projectceebee
@youtubeisinconsistent9169 Жыл бұрын
"Unstake" the axle nut with a very small chisel
@951phantom 4 жыл бұрын
Were you able to keep your front torque mount? Wanna purchase this one to save a few bucks but if I not I'll purchase the CB one... Thanks Bro!
@laurag.8786 5 жыл бұрын
11/16 is also compatible with 17. 9/16 with 14mm. 3/4” with 19mm.
@eduardoaguilar967 3 жыл бұрын
so did you bye this to make way for the hears cause I have the same problem with my cd9
@bradleylavallee8160 3 жыл бұрын
This two bolts on the lower arm what size or code are they
@grindengears4461 3 жыл бұрын
Have you had any noise from the bars?
@jramos9832 4 жыл бұрын
Hey Can you give me some info on innovative setup. I have a 93 CB7. Im starting to restore and improve my daily
@samuelperez5998 4 жыл бұрын
What’s the part number for that traction bar?
@christopherelrod8788 5 жыл бұрын
Wrenches you'll need. 10 12 15 17 19 36. And with those you should be able to tear it completely apart.
@MrRobear 5 жыл бұрын
There you go, he is right, thats all you need to tear a HONDA down
@laurag.8786 5 жыл бұрын
*14 not 15
Sleeperhonda
Рет қаралды 1,9 М.
Дима Масленников
Рет қаралды 9 МЛН
Anthony Do
Рет қаралды 2,9 М.
HunterTuned
Рет қаралды 25 М.
Jaay Pee Built
Рет қаралды 8 М.